ZNDS智能电视网 推荐当贝市场

TV应用下载 / 资源分享区

软件下载 | 游戏 | 讨论 | 电视计算器

综合交流 / 评测 / 活动区

交流区 | 测硬件 | 网站活动 | Z币中心

新手入门 / 进阶 / 社区互助

新手 | 你问我答 | 免费刷机救砖 | ROM固件

查看: 111125|回复: 15
上一主题 下一主题
[魔百盒]

求教,魔百盒CM201-2如何更改MAC码,

[复制链接]
跳转到指定楼层
楼主
发表于 2018-4-25 00:34 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
求大神帮助,愿意当小白鼠~Bootrom start
Boot Media: NAND
Decrypt auxiliary code ...OK

lsadc voltage min: 000002FF, max: 00000302, aver: 00000300, index: 00000001

Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Sep  7 2017 - 01:06:39

Reg Version:  v1.5.4\
Reg Time:     2017/12/19 12:00:55
Reg Name:     hi3798mv3dml_hi3798mv300_LPDDR3-1600_1GB_32bitx1_4layers.reg
DDRS
Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (songyuzheng@TSD182) (Jan 03 2018 - 16:24:09)

Fastboot:      Version 3.3.0
Build Date:    Jan  3 2018, 16:25:10
CPU:           Hi3798Mv300
Boot Media:    NAND
DDR Size:      1GB

Found flash memory controller hifmc100.
Nand ID: 0x2C 0x64 0x44 0x4B 0xA9 0x00 0x00 0x00

Nand: Micron MT29F256G08CMCBB Read-Retry ONFI DDR 2.3
Nand(HW-Auto): Block:2MB Page:8KB OOB:744B ECC:40bit/1k Chip:8GB*1

MMC/SD controller initialization.
No MMC device found !

*** Warning - bad CRC or NAND, using default environment

Net:   upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address


Boot Env on NAND
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000
*** Warning - Env offset is NOT aligned to NAND Flash block size, environment value is read only.

Get ID_WORD lock flag : 0


SDK Version: spc012cp0001_v2017120708

nand<2>
[sw_ptable_init,114] begin
partition addr : [0x0]
partition addr : [0x200000, 0x400000]
[swflash_partition_read,217]part_addr:0x200000, part_size:0x400000, offset:0x0, bytes:0xb10
[sw_ptable_check,292]cksum [0x3691], ptable->checksum[0x3691]
[sw_ptable_init,140] data at 0x0 is ok
[swflash_partition_read,217]part_addr:0x200000, part_size:0x400000, offset:0x0, bytes:0xb10
[sw_ptable_check,292]cksum [0x3691], ptable->checksum[0x3691]
0          fastboot    0x000000000     0x000200000
0         partition    0x000200000     0x000800000
0          recovery    0x000A00000     0x002800000
0         recovery2    0x003200000     0x002800000
0              misc    0x005A00000     0x000800000
0         mlcverify    0x006200000     0x001000000
0         swdevinfo    0x007200000     0x001000000
0         baseparam    0x008200000     0x000800000
0        baseparam2    0x008A00000     0x000800000
0           pqparam    0x009200000     0x000800000
0              logo    0x009A00000     0x000800000
0             logo2    0x00A200000     0x000800000
0          fastplay    0x00AA00000     0x003C00000
0         fastplay2    0x00E600000     0x003C00000
0              boot    0x012200000     0x002800000
0             boot2    0x014A00000     0x002800000
0       trustedcore    0x017200000     0x002800000
0       securestore    0x019A00000     0x000800000
0              swdb    0x01A200000     0x015E00000
0             cache    0x030000000     0x032000000
0            system    0x062000000     0x040000000
0          userdata    0x0A2000000     0x000000000
nand flash partition no fs_flags

ptable info:2M(fastboot),8M(partition),40M(recovery),40M(recovery2),8M(misc),16M(mlcverify),16M(swdevinfo),8M(baseparam),8M(baseparam2),8M(pqparam),8M(logo),8M(logo2),60M(fastplay),60M(fastplay2),40M(boot),40M(boot2),40M(trustedcore),8M(securestore),350M(swdb),800M(cache),1024M(system),-(userdata) ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata

[sw_ptable_dump->252] tmp_bootargs_env=mtdparts=hinand:2M(fastboot),8M(partition),40M(recovery),40M(recovery2),8M(misc),16M(mlcverify),16M(swdevinfo),8M(baseparam),8M(baseparam2),8M(pqparam),8M(logo),8M(logo2),60M(fastplay),60M(fastplay2),40M(boot),40M(boot2),40M(trustedcore),8M(securestore),350M(swdb),800M(cache),1024M(system),-(userdata) ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata
[sw_ptable_init,183] partition : ok
sw_devinfo_init begin [sw_devinfo_init,823]
[swflash_partition_read,217]part_addr:0x7200000, part_size:0x1000000, offset:0x0, bytes:0x8461c
[swflash_partition_read,217]part_addr:0x7a00000, part_size:0x1000000, offset:0x0, bytes:0x8461c
version : [0]
[devinfo_check,169] ok! msg->checksum:0x8c88, crc16:0x8c88
devinfo_init begin [sw_devinfo_init,946]
[devinfo_ext_check,258] ok! msg->checksum:0x0, crc16:0x0
sw_devinfo_init OK
[swflash_partition_read,217]part_addr:0x12200000, part_size:0x2800000, offset:0x0, bytes:0x2000
use boot cmdline,enable serial, cmdline:[mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 blkdevparts=mmcblk0:]

[sw_boot_set_bootargs->175]use nand m_cmdline: mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 nanddbgfs=+ecc_notice,+read_retry_notice,+read_retry,+dump,+ecc_count,+read_count,+erase_count lpj=974848 mtdparts=hinand:2M(fastboot),8M(partition),40M(recovery),40M(recovery2),8M(misc),16M(mlcverify),16M(swdevinfo),8M(baseparam),8M(baseparam2),8M(pqparam),8M(logo),8M(logo2),60M(fastplay),60M(fastplay2),40M(boot),40M(boot2),40M(trustedcore),8M(securestore),350M(swdb),800M(cache),1024M(system),-(userdata) ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata
sw_ir_detect begin 500 count
sw_ir_detect ok  

[sw_boot_set_bootargs->242]bootargs:[mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 nanddbgfs=+ecc_notice,+read_retry_notice,+read_retry,+dump,+ecc_count,+read_count,+erase_count lpj=974848 mtdparts=hinand:2M(fastboot),8M(partition),40M(recovery),40M(recovery2),8M(misc),16M(mlcverify),16M(swdevinfo),8M(baseparam),8M(baseparam2),8M(pqparam),8M(logo),8M(logo2),60M(fastplay),60M(fastplay2),40M(boot),40M(boot2),40M(trustedcore),8M(securestore),350M(swdb),800M(cache),1024M(system),-(userdata) ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata androidboot.selinux=permissive androidboot.force_open_console=none]

start
mlcverify_offset:0x6200000
mlcverify_info_size:2584
[swflash_partition_read,217]part_addr:0x6200000, part_size:0x800000, offset:0x0, bytes:0xa18
start...
checksum:dbce, pmlcverify_info->checksum:dbce
ok,checksum:0xdbce
data at 0x006200000 is ok
maigic:MLCVERIFY!, count:10, time:1515752848
partition0: recovery(c3a000) verify_value:1add
partition1: recovery2(c3a000) verify_value:1add
partition2: baseparam(16ac) verify_value:1c4e
partition3: baseparam2(16ac) verify_value:1c4e
partition4: logo(30000) verify_value:db3a
partition5: logo2(30000) verify_value:db3a
partition6: fastplay(0) verify_value:0
partition7: fastplay2(0) verify_value:0
partition8: boot(963000) verify_value:d0c5
partition9: boot2(963000) verify_value:d0c5
ok
partname: logo
find logo in mlcverify
[swflash_partition_read,217]part_addr:0x9a00000, part_size:0x800000, offset:0x0, bytes:0x30000
verify logo OK
partname: baseparam
find baseparam in mlcverify
[swflash_partition_read,217]part_addr:0x8200000, part_size:0x800000, offset:0x0, bytes:0x16ac
verify baseparam OK
[Android_Main,39] begin
[sw_set_gpio,128] OK
[swflash_partition_read,217]part_addr:0x5a00000, part_size:0x800000, offset:0x0, bytes:0x10000
boot normal!!!
partname: boot
find boot in mlcverify
[swflash_partition_read,217]part_addr:0x12200000, part_size:0x2800000, offset:0x0, bytes:0x963000
verify boot OK
[sw_boot_set_bootcmd->365]bootm now: bootm 0x1FFFFC0
[Android_Main,86] ok
Reserve Memory
    Start Addr:          0xFFFE000
    Bound Addr:          0x8D99000
    Free  Addr:          0xF0A8000
    Alloc Block:  Addr         Size
                  0xFBFD000   0x400000
                  0xF8FC000   0x300000
                  0xF8F9000   0x2000
                  0xF878000   0x80000
                  0xF5D4000   0x2A3000
                  0xF24F000   0x384000
                  0xF24B000   0x3000
                  0xF0**00   0x195000
                  0xF0AB000   0x9000
                  0xF0A8000   0x2000

[abortboot,110] begin
[abortboot,113] close loader keyed
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...

Found Initrd at 0x04E00000 (Size 747485 Bytes), align at 2048 Bytes

## Booting kernel from Legacy Image at 020007c0 ...
   Image Name:   Linux-3.18.24_hi3798mv2x
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    9092184 Bytes = 8.7 MiB
   Load Address: 02000000
   Entry Point:  02000000
   Loading Kernel Image from 0x33556480 to 0x33554432 ... OK
OK
There are some conflict between "booargs" and "bootargs_1G".
The param "mmz " in "bootargs_1G" will be ignored.

ATAGS [0x00000100 - 0x000005FC], 1276Bytes

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
>>>  init /disk2/zhangchaoyang/SDK/Hisi3798MV300_mlc/device/hisilicon/bigfish/sdk/source/kernel/linux-3.18.y/drivers/usb/usbir/usb-ir.c  usb_usbir_init
UBI error: ubi_attach_mtd_dev: mtd18 is already attached to ubi0
UBI error: ubi_init: cannot attach mtd18
UBI error: ubi_attach_mtd_dev: mtd19 is already attached to ubi1
UBI error: ubi_init: cannot attach mtd19
UBI error: ubi_attach_mtd_dev: mtd20 is already attached to ubi2
UBI error: ubi_init: cannot attach mtd20
UBI error: ubi_attach_mtd_dev: mtd21 is already attached to ubi3
UBI error: ubi_init: cannot attach mtd21
init: /init.bigfish.rc: 55: invalid command 'getprop'
init: /init.bigfish.rc: 114: invalid option 'sdcard_r'
init: could not import file '/init.sunniwell.rc' from '/init.rc'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: /dev/hw_random not found
init: call cmd SYS_GET_CHIPPACKAGETYPE failed :Invalid argument
init: reg_value = 0xffffffff
init: read reg value failed
init: [devinfo] name:mac,value:54:C5:7A:42:73:28
init: [devinfo] name:serialno,value:003201FF0001061001B154C57A427328
init: [devinfo] name:secureline,value:100
init: [devinfo] name:deviceid,value:111001610505162
init: sw_properties_init end..
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/teecd', disabling 'teecd'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/gpio-led', disabling 'gpio-led'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
root@Hi3798MV300:/ # init: sys_prop: permission denied uid:1002  name:persist.bt.fwdump
init: untracked pid 1993 exited
init: sys_prop: permission denied uid:1000  name:ro.config.gfx2d_compose
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
init: untracked pid 1996 exited
init: sys_prop: permission denied uid:1000  name:persist.ethernet.on


上一篇:各位大神,cm101s-2有复位键吗??
下一篇:广东移动魔百和MG101-UA5_GD免ttl安装第三方应用
推荐
发表于 2018-4-25 10:00 | 只看该作者
先把机器刷成砖,再把砖头刷成机器,我都佩服自己在ZNDS学到的刷机技术!
回复 支持 0 反对 1

使用道具 举报

头像被屏蔽
板凳
发表于 2018-4-25 09:52 | 只看该作者
提示: 作者被禁止或删除 内容自动屏蔽
回复 支持 反对

使用道具 举报

地板
发表于 2018-4-25 10:15 | 只看该作者
只能帮顶了
回复 支持 反对

使用道具 举报

5#
发表于 2018-4-25 16:17 来自ZNDS手机版 | 只看该作者
Addghvhjjggjj
回复 支持 反对

使用道具 举报

6#
发表于 2018-4-26 00:58 来自ZNDS手机版 | 只看该作者
看起来不错噢!感谢分享!!
回复 支持 反对

使用道具 举报

7#
发表于 2018-4-26 05:47 | 只看该作者
老铁666!必须支持一波!
回复 支持 反对

使用道具 举报

8#
发表于 2018-4-26 19:36 | 只看该作者

看起来不错噢!感谢分享!!
回复 支持 反对

使用道具 举报

9#
发表于 2018-4-28 06:43 来自ZNDS手机版 | 只看该作者
支持楼主
回复 支持 反对

使用道具 举报

10#
发表于 2018-10-13 19:06 | 只看该作者
要改这种MAC的可以和我联系,用户我就是微信号
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|新帖|标签|软件|Sitemap|ZNDS智能电视网 ( 苏ICP备2023012627号 )

网络信息服务信用承诺书 | 增值电信业务经营许可证:苏B2-20221768 丨 苏公网安备 32011402011373号

GMT+8, 2024-4-19 14:11 , Processed in 0.074871 second(s), 12 queries , Redis On.

Powered by Discuz!

监督举报:report#znds.com (请将#替换为@)

© 2007-2024 ZNDS.Com

快速回复 返回顶部 返回列表