EEEE I3000000032940xf10011c336B77500EEEE I400000004294_M8_BL1_10221D113B323EEEE I3000000032940xbbbb000026A22525
no sdio debug board detected
TE : 1428474
BT : 12:53:13 Apr 13 2015
DCDC01 set to 1050, register from 0x0018 to 0x0024, addr:0x0036
DCDC02 set to 1150, register from 0x0018 to 0x002c, addr:0x0037
DCDC03 set to 1500, register from 0x0038 to 0x0048, addr:0x0038
LDO01 set to 2900, register from 0x004e to 0x0050, addr:0x004c
LDO02 set to 1800, register from 0x0024 to 0x0024, addr:0x004d
LDO03 set to 1800, register from 0x0030 to 0x0030, addr:0x004e
LDO04 set to 2850, register from 0x004e to 0x004e, addr:0x004f
LDO05 set to 1800, register from 0x0024 to 0x0024, addr:0x0050
LDO0a set to 2700, register from 0x0028 to 0x0028, addr:0x0056
LDO0b set to 900, register from 0x0000 to 0x0000, addr:0x0057
CPU clock is 792MHz
DDR clock is 768MHz with 1T mode
DDR check pass!
DDR init use : 8308 us
HHH
Start load SMP code!
Load SMP code finished!
Boot From SDIO C
0x0000008d
Aml log : M8-RSA-1024
Aml log : TPL secure check pass!
ucl decompress...pass
0x12345678
Boot from internal device 1st SDIO C
TE : 1687615
System Started
U-boot-00000-g2af4709(m8_mango_v1@2af4709b) (Apr 13 2015 - 12:53:02)
clr h-ram
DRAM: 1 GiB
relocation Offset is: 2fec8000
show partition table:
part: 0, name : logo, size : 1000000
part: 1, name : logo1, size : 1000000
part: 2, name : recovery, size : 2000000
part: 3, name : boot, size : 2000000
part: 4, name : system, size : 32000000
part: 5, name : cache, size : 28000000
part: 6, name : databk, size : c800000
part: 7, name : swap, size : 19000000
part: 8, name : data, size : end
aml_card_type=0x100
MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6
[mmc_register] add mmc dev_num=1, port=2, if_type=6
SDIO Port B: 0, SDIO Port C: 1
led blue
PMU fault status:
reg[0x9A] = 0x1d
register usb cfg[0][1] = 3ff73470
register usb cfg[0][2] = 3ff70208
register usb cfg[2][0] = 3ff73488
NAND: EMMC BOOT: not init nand
do not init nand : cause boot_device_flag without nand
get_boot_device_flag: init_ret -1
get_boot_device_flag EMMC BOOT:
Emmckey: Access range is illegal!
[mmc_init] SDIO Port C:1, if_type=6, initialized OK!
[mmc_get_partition_table] skip cache partition.
Partition table get from SPL is :
name offset size flag
===================================================================================
0: bootloader 0 400000 0
1: reserved 2400000 4000000 0
2: cache 6400000 28000000 2
3: env 2e400000 800000 0
4: logo 2ec00000 1000000 1
5: logo1 2fc00000 1000000 1
6: recovery 30c00000 2000000 1
7: boot 32c00000 2000000 1
8: system 34c00000 32000000 1
9: databk 66c00000 c800000 1
10: swap 73400000 19000000 1
11: data 8c400000 145c00000 4
mmc read lba=0x12000, blocks=0x1
mmc read lba=0x12001, blocks=0x1
mmc_read_partition_tbl: mmc read partition OK!
eMMC/TSD partition table have been checked OK!
i=0,register --- emmc_key
MMC BOOT, emmc_env_relocate_spec : env_relocate_spec 59
set_storage_device_flag: store 2
Unknown command 'm8_mango_1g' - try 'help'
[imgread]Secure kernel sz 0x835c50
Aml log : M8-RSA-1024
Aml log : Image secure check pass!
Multi dtb detected, support 2 dtbs.
soc: "m8 ", platform: "mang", variant: "1g "
soc_int: 6d382020, platform_int: 6d616e67, variant_int: 31672020
0 dtb: soc 6d382020 plat 6d616e67 vari 31672020 "m8_mang_1g"
1 dtb: soc 6d382020 plat 6d616e67 vari 32672020 "m8_mang_2g"
Find match dtb: 0
vpu clk_level in dts: 7
set vpu clk: 364300000Hz, readback: 364300000Hz(0x700)
In: serial
Out: serial
Err: serial
Net: Meson_Ethernet
init suspend firmware done. (ret:0)
cvbs trimming.1.v5: 0xa0, 0x0
enter preboot...
-->reboot_mode:0x0
reboot_mode=charging
enter prepare...
mode = 6 vic = 4
reconfig packet setting done
enter switch_bootmode...
reboot_mode charging
Hit Enter key to stop autoboot -- : 0
exit abortboot: 0
check_boot_hang, boot_hang="0"
check_boot_hang, no need hang return.
enter storeboot...
Booting...
pos 509 value is 20not config efuse version
aml_keys: version 0 can not be init 3ff7369c
current storer:emmc_key
ERR(v2_common/optimus_download_key.c)L268:failed to query key state, rc 0, keyIsBurned=0
## ANDROID Format IMAGE
## Booting kernel from Legacy Image at 12000000 ...
Image Name: Linux-3.10.33
Image Type: ARM Linux Kernel Image (lzo compressed)
Data Size: 6227205 Bytes = 5.9 MiB
Load Address: 00208000
Entry Point: 00208000
Verifying Checksum ... OK
Ramdisk start addr = 0x125f1000, len = 0x239db6
Multi dtb detected, support 2 dtbs.
soc: "m8 ", platform: "mang", variant: "1g "
soc_int: 6d382020, platform_int: 6d616e67, variant_int: 31672020
0 dtb: soc 6d382020 plat 6d616e67 vari 31672020 "m8_mang_1g"
1 dtb: soc 6d382020 plat 6d616e67 vari 32672020 "m8_mang_2g"
Find match dtb: 0
Flat device tree start addr = 0x1282b800, len = 0x4c94 magic=0xedfe0dd0
Uncompressing Kernel Image ... OK
is_check_restored, bootm_mode="boot"
uboot time: 5425118 us.
EFUSE machid is not set.
Using machid 0xf81 from environment
From device tree /memory/ node aml_reserved_end property, for relocate ramdisk and fdt, relocate_addr: 0x5242001
Loading Ramdisk to 05008000, end 05241db6 ... OK
Loading Device Tree to 05000000, end 05007c93 ... OK
Starting kernel ...
[ 0.000000@0] Global timer: MESON TIMER-F (c0ab0200) initialized
[ 0.126558@0] ram_console: failed to create proc entry
[ 0.132064@0] /home/jenkins/.jenkins/jobs/workspace/Release-amlogics802-1sp150313-MagicBox1s_Plus-secuser/common/drivers/amlogic/i2c/aml_i2c.c : aml_i2c_init
[ 0.141401@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
[ 0.145784@0] [DVFS]dvfs table of vcck_dvfs is:
[ 0.150302@0] [DVFS] freq, min_uV, max_uV
[ 0.155142@0] [DVFS] 96000, 825000, 825000
[ 0.159996@0] [DVFS] 192000, 825000, 825000
[ 0.164857@0] [DVFS] 312000, 825000, 825000
[ 0.169704@0] [DVFS] 408000, 825000, 825000
[ 0.174565@0] [DVFS] 504000, 825000, 825000
[ 0.179413@0] [DVFS] 600000, 850000, 850000
[ 0.184272@0] [DVFS] 720000, 850000, 850000
[ 0.189121@0] [DVFS] 816000, 875000, 875000
[ 0.193981@0] [DVFS] 1008000, 925000, 925000
[ 0.198829@0] [DVFS] 1200000, 975000, 975000
[ 0.203689@0] [DVFS] 1416000, 1025000, 1025000
[ 0.208538@0] [DVFS] 1608000, 1100000, 1100000
[ 0.213398@0] [DVFS] 1800000, 1125000, 1125000
[ 0.218246@0] [DVFS] 1992000, 1150000, 1150000
[ 0.268336@0] [DVFS]aml_dvfs_register_driver, driver rn5t618-dvfs regist success, mask:7, source id:1
[ 0.272002@0] [RN5T618]ricoh_pmu_probe, 296
[ 0.504249@0] start read sedio dts
[ 0.718573@0] [RN5T618]rn5t618_otg_change, driver is not ready, do it later
[ 1.068870@3] aml_rtc_init...
[ 1.070813@3] [AML1218]call aml1216_battery_init, ret = 0
[ 1.071372@1] ###check hw reset function is already enabled here
[ 1.077668@3] [AML1218]call aml1218_battery_init, ret = 0
[ 1.083044@1] [RN5T618]call rn5t618_battery_probe in
[ 1.088057@3] [RN5T618]use BSP configed battery parameters
[ 1.093407@3] [RN5T618] NO BATTERY_PARAMETERS FOUND
[ 1.098235@3] [RN5T618]rn5t618_otg_work_fun, value:1, is_short:0
[ 1.104646@3] [RN5T618]set boost en bit, val:33
[ 1.142505@3] [RN5T618]call rn5t618_battery_probe exit, ret:0
[ 1.142581@2] [RN5T618]call rn5t618_battery_init, ret = 0
[ 2.646858@3] init: mount none to target failed
[ [ 2.863507@3] init: mount none to target failed
[ 2.863642@3] init: mount none to target failed
[ 2.866995@3] init: mount none to target failed
[ 2.873440@3] init: mount none to target failed
[ 2.884659@3] init: Before e2fsck_main...
[ 3.210754@3] init: After e2fsck_main...
[ 3.216455@3] init: Before e2fsck_main...
[ 3.216626@3] init: After e2fsck_main...
[ 3.230739@3] aml_keys: version 0 can not be init c0ad95d8
[ 3.397207@1] init: /dev/hw_random not found
[ 3.421039@1] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 3.427137@1] init: cannot find '/system/bin/ou', disabling 'yunos_ou'
[ 3.450020@1] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[ 3.454198@1] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[ 3.466750@1] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[ 3.476693@1] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[ 3.491076@1] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 3.497917@1] init: powerctl: cannot expand '${sys.powerctl}'
[ 3.503430@1] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[ 3.514491@1] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[ 3.525018@1] init: property 'sys.kernel.panic' doesn't exist while expanding '${sys.kernel.panic}'
[ 3.534382@1] init: cannot expand '${sys.kernel.panic}' while writing to '/proc/sys/kernel/panic'
[ 3.543229@1] android_usb: already disabled
[ 3.565162@3] init: data_integrity_guard main!
[ 3.565206@3] init: is_support_system_bak sup_sys_bak:0
root@MagicBox1s_Plus:/ # [ 18.055171@2] init: no such service 'wififix'
[ 18.578680@3] init: data_integrity_guard isBootCompleted:1!
[ 69.316274@0] init: sys_prop: permission denied uid:1013 name:media.multich.support.info
[ 85.120871@0] init: sys_prop: permission denied uid:1013 name:media.multich.support.info
|
网站导航
[复制链接]
发表于 2015-5-15 15:19
收藏
淘帖
顶一个
踩
提升卡
置顶卡
变色卡
千斤顶
楼主
znds.com 