非常感谢，大神就是大神。现在数据能出来了，可是无法输入，看来我的这个板子破解一路艰辛啊。还麻烦大神帮忙看下，我的这个是怎么回事，下面是出来的代码
Xshell 5 (Build 0446)
Copyright (c) 2002-2014 NetSarang Computer, Inc. All rights reserved.
Type `help' to learn how to use Xshell prompt.
[C:\Users\lenovosq]$
Connecting to COM5...
Connected.
AC_ON
MIU0_DQS-OK
BIST0-
MIU0-1024_U
Relocation Offset is: 011d7000
[AT][MB][start ub][362]
U-Boot 2011.06 (Sep 22 2016 - 14:17:25)
[MIU INFO] miu opencreate instance at 559e9418 with private size 80 bytes at 559e9460
create instance at 559e94b8 with private size 52 bytes at 559e9500
uboot held at [557ddf60~56b00000],size=013220a0
CPU : Clippers
Board: BD_MST207C_D01A_S_CLIPPERS
DRAM: 875 MiB
Now running in RAM - U-Boot at: 55c00000
eMMC: HS200 200MHz
eMMC 7.28 GB [E8FFF8h]
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Set MAC default
MAC: 0x0: 0x30: 0x1b: 0xba:0x2: 0xdb
msIR_Initialize
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x0), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37bb0000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x1), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37930000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x2), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37130000)
[======= initialize DEC-R2[0] SHM =======]
[======= initialize DEC-R2[1] SHM =======]
audio DSP_SE LoadCode success..[[utopia]] === HAL_MAD_SetDecCmd 0 fail===
DEC System code download finished!
[CPU INFO] cpu opencreate instance at 559f99c0 with private size 44 bytes at 559f9a08
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[38]: MODULE_CPU
[AT][MBoot][Driver Init][584]
lwx_debug:boot_protect 0
Changelist: 24543697
============= set bootargs ===============
Hit any key to stop autoboot: 0
AC on
get ir boot mode, count is 1
fore uup IRKey [0xff]
get ir boot mode, count is 2
fore uup IRKey [0xff]
get ir boot mode, count is 3
fore uup IRKey [0xff]
get ir boot mode, count is 4
fore uup IRKey [0xff]
get ir boot mode, count is 5
fore uup IRKey [0xff]
get ir boot mode, count is 6
fore uup IRKey [0xff]
get ir boot mode, count is 7
fore uup IRKey [0xff]
get ir boot mode, count is 8
fore uup IRKey [0xff]
get ir boot mode, count is 9
fore uup IRKey [0xff]
get ir boot mode, count is 10
fore uup IRKey [0xff]
get ir boot mode, count is 11
fore uup IRKey [0xff]
get ir boot mode, count is 12
fore uup IRKey [0xff]
[do_bootcheck,992][ZTEWatchdog]PATCH FOR zte BEGIN
[do_bootcheck,996][ZTEWatchdog] Watchdog_enable TRUE
[do_bootcheck,1002][ZTEWatchdog] Watchdog start, MAXTIME 120
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
create instance at 559f9c70 with private size 256 bytes at 559f9cb8
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
PNL:[MDrv_PNL_SetPanelType][613]
[_MDrv_PNL_Init_LPLL][323]pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
[_MDrv_PNL_Init_LPLL][325]u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
[_MDrv_PNL_Init_Output_Dclk][369]pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
[_MDrv_PNL_Init_Output_Dclk][371]u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
PNL:CalculateLPLLSETbyDClk u32KHz = 742500000, u64DefaultLdHz = 742500000
PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df
[MApi_XC_MLG_GetStatus, 1603]No instance existed, please get an instance by calling MApi_XC_Init() first
msHdmitx_Disp_Init
create instance at 559f9dc0 with private size 1720 bytes at 559f9e08
[XC,Version]
no need to patchcreate instance at 559faa08 with private size 80 bytes at 559faa50
Rx Support HDMI mode!
3-1 ssc_span_val=1887436800, ssc_step_val=0, reg_32value=2440322
3-2 ssc_span_val=773, ssc_step_val=0, reg_32value=2440322
3-3 ssc_span_val=773, ssc_step_val=3, reg_32value=2440322
msdbg REG_PKT_AVI_1_09=5850, 0x2008=2, bIs420=0
msdbg bIsMSO9280NC = 0, bIsHDMI20=0, b222MHz=0, idx=5, cd_val=0
setHDMITxAnalogTuning: Error: MApi_HDMITx_GetRxDCInfoFromEDID EDID is not ready, at 260
shift -8 pixels in PAL mode
Create Dolby single part name task failed!![Hal_VE_Set_PreHSD][1817] ERROR!!! HVSD H input = 0, HVSD H output = 720
[Hal_VE_Set_PreVSD][1991] ERROR!!! HVSD V input = 0, HVSD V output = 576
[Hal_VE_EnableDI][2099] bEnable = 0, bIsDNR2VE = 0
mmc change mount : userdata
Size of file "local/boot0.jpg" from mmc device 0 partition userdata: -1 bytes
mmc change mount : tvconfig
Size of file "/boot0.jpg" from mmc device 0 partition tvconfig: 180228 bytes
Loading file "/boot0.jpg" at offset 0x0 from mmc device 0 partition tvconfig
180228 bytes read
create instance at 559faaa8 with private size 304 bytes at 559faaf0
[AT][MB][JPD Decode][1826]
[UTOPIA INFO] close moduleNames[35]: MODULE_NJPEG_EX
create instance at 559faaa8 with private size 132280 bytes at 559faaf0
[GOP INFO] gop opencreate instance at 55a1afb0 with private size 6912 bytes at 55a1aff8
create instance at 55a1cb00 with private size 1720 bytes at 55a1cb48
GOPLog gop=3 alphainverse = 1 Ioctl_GOP_Init(6360)
GOPLog gopdst=0x0 gop=3 enable=1 MDrv_GOP_GWIN_SetAlphaInverse(3044)
GOPLog GopDst=0x2 gop=3 MApi_GOP_GWIN_SetGOPDst(2956)
GOPLog GopDst=0x3 gop=3 Ioctl_GOP_SetDst(7576)
GOPLog gopdst=0x3 gop=3 alphainverse = 1 _GOP_SetOCCapability(2781)
GOPLog gopdst=0x3 gop=3 enable=1 MDrv_GOP_GWIN_SetAlphaInverse(3044)
[AT][MB][Show Logo][1906]
Unknown command 'uart_rx' - try 'help'
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 4798502 Bytes = 4.6 MiB
Load Address: 20208000
Entry Point: 20208000
Contents:
Image 0: 4468848 Bytes = 4.3 MiB
Image 1: 329642 Bytes = 321.9 KiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][2004]
Starting kernel ...
[PROTECT ERROR], not expected dram size: 0x0
#######################################################################
# [PROTECT WARNING], miu kernel protect is not enabled on second dram #
#######################################################################
Uncompressing Linux... done, booting the kernel.
KERN-3.10.23.001049551
tommy: thread_info_cache_init
mtdoops: mtd device (mtddev=name/number) must be supplied
[drivers/mstar2/drv/emac/mdrv_emac.c MDev_EMAC_HW_init 2091] ready init mutex
[drivers/mstar2/drv/emac/mdrv_emac.c MDev_EMAC_HW_init 2092] after init mutex
RBQP_BASE = 53d04000
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
init: /init.clippers.rc: 351: ignored duplicate definition of service 'mdnsd'
init: /dev/hw_random not found
A N D R O I D
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
mdrv_software_ir: version magic 'SMP mod_unload ARMv7 ' should be '3.10.23 SMP preempt mod_unload ARMv7 '
init: /dev/hw_random not found
healthd: No charger supplies found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
root@orange:/ # sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
init: sys_prop: permission denied uid:1002 name:persist.bt.fwdump
NTFS-fs warning (device sda4): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device sda4): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device sda4): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device sda4): ntfs_fill_super(): Not an NTFS volume.
init: no such service 'fuse_2310-19D9'
NTFS-fs warning (device sda1): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device sda1): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device sda1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device sda1): ntfs_fill_super(): Not an NTFS volume.
init: no such service 'fuse_0000-0000'
init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
usb_storage: exports duplicate symbol fill_inquiry_response (owned by kernel)
ehci_hcd: exports duplicate symbol ehci_init_driver (owned by kernel) |
网站导航
楼主: fulianliang
[复制链接]
发表于 2017-1-31 16:41
楼主
znds.com 