B806A不带后缀，2015年联通的盒子，线刷卡在4%，ttl里

这是我 · 发表于 2026-1-31 12:58

进入m8m2_n200_v1#命令行，只有upgrade 命令，没有 upgrade_d命令，只能刷merge.bin文件，可是论坛里也找不到这个格式的固件，求助，谢谢。

1337565980 · 发表于 2026-1-31 16:49

通过网盘分享的文件：M8S_aml_upgrade_package_16.0_20160229.rar
链接: https://pan.baidu.com/s/1ADo5yjopu94m9zQkX8LeNw 提取码: 9ifu
--来自百度网盘超级会员v9的分享
用这个线刷，刷机工具用2.0.5或别的2.0.X版本带key的版本。短路触发刷机工具联机。

这是我 · 发表于 2026-1-31 20:44

本帖最后由这是我于 2026-1-31 20:49 编辑

1337565980 发表于 2026-1-31 16:49
通过网盘分享的文件：M8S_aml_upgrade_package_16.0_20160229.rar
链接: https://pan.baidu.com/s/1ADo5yjo ...

多谢回复，下了这个版本的工具晶晨USB_Burning_Tool_v2.0.5.15-build9（带license），2.0.5没有找到，
现在是刷到6%中断，提示:
[20:38:51 749][HUB3-8][Err]--[0x30402004]UBOOT/烧录分区 boot/初始化分区/命令结果返回错误
[20:38:51 749][HUB3-8][Inf]--Close device handle 0x0000041c
btw：短接的是R23电阻。

这是我 · 发表于 2026-1-31 20:48

很多命令没有，下面是版本号：

m8m2_n200_v1#version

U-boot-00000-g456adb9-dirty(m8_k200_v1@) (Mar 05 2016 - 16:37:39)
arm-none-eabi-gcc (Sourcery G++ Lite 2010q1-188) 4.4.1
GNU ld (Sourcery G++ Lite 2010q1-188) 2.19.51.20090709

这是我 · 发表于 2026-1-31 22:09

QA9:A;SVN:74E;POC:17F;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0;
no sdio debug board detected
TE : 1293254
BT : 16:38:07 Mar  5 2016
NO PMU:use DCDC
##### VDDEE voltage = 0x044c

CPU clock is 1200MHz

CPU type: M8M2
DDR info: 1GB(auto) @ 792MHz(1T)+Scramb EN
DDR channel: DDR 0 + DDR 1

DDR init use : 13093 us

HHH
Boot From SDIO C
0x0000008d
ucl decompress...pass
0x12345678
Boot from internal device 1st tSD/fSD on SDIO C

TE : 1507796

System Started

U-boot-00000-g456adb9-dirty(m8_k200_v1@) (Mar 05 2016 - 16:37:39)

clr h-ram
DRAM:  1 GiB
relocation Offset is: 2feb8000
show partition table:
part: 0, name :    logo, size : 2000000
part: 1, name : recovery, size : 2000000
part: 2, name :    misc, size : 2000000
part: 3, name :    boot, size : 2000000
part: 4, name :    system, size : 40000000
part: 5, name :    cache, size : 20000000
part: 6, name :    data, size : end
aml_card_type=0x200
MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6
[mmc_register] add mmc dev_num=1, port=2, if_type=6
SDIO Port B: 0, SDIO Port C: 1
board_type 6
register usb cfg[0][1] = 3ff700d0
register usb cfg[2][0] = 3ff73848
mcli -- wifi_power_init in uboot --
enter emmc boot
error 9 requesting status 0x0
Emmckey: Access range is illegal!
[mmc_init] SDIO Port C:1, if_type=6, initialized OK!
[mmc_get_partition_table] skip cache partition.
Partition table get from SPL is :
      name                      offset             size             flag
===================================================================================
0: bootloader                      0          400000                0
1: reserved                   2400000          4000000                0
2: cache                      6c00000       20000000                2
3: env                      27400000          800000                0
4: logo                      28400000          2000000                1
5: recovery                   2ac00000          2000000                1
6: misc                      2d400000          2000000                1
7: boot                      2fc00000          2000000                1
8: system                   32400000       40000000                1
9: data                      72c00000       79400000                4
mmc read lba=0x12000, blocks=0x1
mmc read lba=0x12001, blocks=0x1
mmc_read_partition_tbl: mmc read partition OK!
eMMC/TSD partition table have been checked OK!
i=0,register --- emmc_key
device_boot_flag=2
EMMC BOOT: not init nand
do not init nand : cause boot_device_flag without nand
MMC BOOT, emmc_env_relocate_spec : env_relocate_spec 74
set_storage_device_flag: store 2
vpu driver detect cpu type: m8m2
vpu clk_level = 7
set vpu clk: 364000000Hz, readback: 364000000Hz(0x700)
do_judgecheck argc: 5
argv[1]: 2 argv[2]: 1 argv[3]: true argv[4]: outputdefault
judgecheck - judgecheck 1 1 true/false command command

Usage:
judgecheck    argv: <key> <value> <true/false> <command> <command>

mode = 6  vic = 4
set HDMI vic: 4
config HPLL
config HPLL done
reconfig packet setting done
bmp pixel: 16
   Multi dtb tool version: v2 .
   Multi dtb detected, support 5 dtbs.
      aml_dt soc: m8m2 platform: n200C variant: sdio
      dtb 0 soc: m8m2 plat: n200 vari: 1G
      dtb 1 soc: m8m2 plat: n200 vari: 2G
      dtb 2 soc: m8m2 plat: n200 vari: sdio
      dtb 3 soc: m8m2 plat: n200C vari: 1G
      dtb 4 soc: m8m2 plat: n200C vari: sdio
   Find match dtb: 4
Net: Meson_Ethernet
init suspend firmware done. (ret:0)
cvbs trimming.1.v5: 0xa0, 0x0
efuse version is not selected.
reboot_mode=charging
Unknown command 'hdcp' - try 'help'
Hit Enter key to stop autoboot -- :  1 tstc enter

exit abortboot: 1
m8m2_n200_v1#
m8m2_n200_v1#

› 运营商IPTV / 有线电视 / 广电机顶盒 › 中国移动魔百盒

B806A不带后缀，2015年联通的盒子，线刷卡在4%，ttl里 ...

B806A不带后缀，2015年联通的盒子，线刷卡在4%，ttl里

站长推荐 /1