魔百盒cm101s-2 hitool emmc 烧写报错

greatt1n · 发表于 2022-5-15 22:01

本帖最后由智能小柠檬于 2022-5-16 09:33 编辑

cm101s-2 救砖的时候写入fastboot 报错，谁帮看看啥原因？

Send command:       mmc write 0x0 0x1000000 0x0 0x800

MMC write: dev # 0, block # 0, count 2048 ... HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: reserved
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: reserved
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: reserved
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: reserved
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: reserved
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: Device not switch to the expected mode
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: An erase sequence was clearled before excuting
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: Only partial address space was erased due to write protected blocks
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: Cid/csd overwrite
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: reserved
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: reserved
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: Device error related to the execution of the last command
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: Device error occurred, not related to the host command
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: Device internal ECC was applied but failed to correct the data
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: command not legal fo the Device state
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: the CRC check of the command failed
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: a sequence or password error happen in lock/unlock device cmd
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: status bit
HIMCI_ERROR hi_mci_cmd_done:467: Is Card error: Attempt to program a write protected block
mmc write stop failed!
-1 blocks written: ERROR
[EOT](ERROR)
执行命令失败，可能的原因如下：
1.请检查当前单板Flash与烧写分区中的Flash类型是否一致；
2.当前fastboot不支持该命令；
Failed to burn fastboot!

greatt1n · 发表于 2022-5-15 23:05

我开始飘了… 发表于 2022-5-15 22:28
文件不对

好像不是，现在擦除全器件也擦不了了。也报错

# ---- 50%
# ---- 100%
Boot download completed!
Starting fastboot ...
等待boot启动超时，单板上无fastboot或当前fastboot无法启动。
Failed to Download Boot!

我开始飘了… · 发表于 2022-5-15 22:28

文件不对

hongy · 发表于 2022-5-15 23:16

FB不对

ZNDS_Tong · 发表于 2022-5-15 23:46

mv100主控是的

ZNDS_Tong · 发表于 2022-5-16 07:55

可能大部分闪存字库坏了

t1995 · 发表于 2024-11-4 23:54

ZNDS_Tong 发表于 2022-5-16 07:55
可能大部分闪存字库坏了

请问下，字库损坏有办法解决吗

398445155 · 发表于 2025-2-3 12:10

大概率硬件问题，我的也是

› 运营商IPTV / 有线电视 / 广电机顶盒 › 中国移动魔百盒

魔百盒cm101s-2 hitool emmc 烧写报错

魔百盒cm101s-2 hitool emmc 烧写报错

相关帖子