首发！瑞芯微RK3128H系列通刷教程

liuguian · 发表于 2025-10-7 10:13

在哪里下载

qfnuzlr · 发表于 2025-10-12 08:43

TTL如下，如何救砖
U-Boot 2014.10-RK3128-06 (May 26 2022 - 09:43:22)

CPU: rk3128
cpu version = 0
CPU's clock information:
arm pll = 600000000HZ
periph pll = 594000000HZ
ddr pll = 600000000HZ
codec pll = 400000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks: 1
Adding bank:0000000060000000(0000000040000000)
128 MiB
GIC CPU mask = 0x00000001
rk dma pl330 version: 1.4
remotectl v0.1
pwm freq=0xb?*V?k%??§ã= 0 20
SdmmcInit = 2 0
storage init OK!
Using default environment

GetParam
Load FDT from boot image.
power key: bank-3 pin-23
can't find dts node for fixed
No pmic detect.
power hold: bank-1 pin-2, active level-1
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2022-05-26#2.40
empty serial no.
normal boot.
is normal boot, hold it...

MM377377 · 发表于 2025-12-23 14:37

感谢分享。

samlyh · 发表于 2025-12-31 11:17

你们都是直接把下载的固件刷进去的吗？不用备份原固件吗？直接刷好就能用？不会变砖？

美子668 · 发表于 2026-2-4 23:02

adb1981051 发表于 2021-5-20 01:39
瑞芯微RK3128H系列通刷教程

有固件吗

zxf1025 · 发表于 2026-3-4 16:04

我的起不来了具体TTL
  codec pll = 400000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM:  Found dram banks: 1
Adding bank:0000000060000000(0000000040000000)
128 MiB
GIC CPU mask = 0x00000001
rk dma pl330 v*V玨%攻褋= 0 20
SdmmcInit = 2 0
storage init OK!
Using default environment

GetParam
Load FDT from resource image.
power key: bank-16777215 pin-255
No pmic detect.
[LZN Patch] light on keypad(GPIO1_A3) led.
[LZN Patch] close speaker volume(GPIO0_A2).
[LZN Patch] disable WIFI_BT-EN(GPIO0_D6).
[LZN Patch] disable WIFI_REG_ON(GPIO3_D3).
[LZN Patch] disable BT_RST(GPIO3_C5).
[LZN Patch] set low for spi pins.
[LZN Patch] set low for PANEL_UPDOWN(GPIO0_D1).

[15:52:37.187]收←◆set pwm voltage ok,pwm_id =1 vol=1250000,pwm_value=36
set pwm voltage ok,pwm_id =2 vol=1200000,pwm_value=45
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2024-03-05#2.31
empty serial no.
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
read logo on state from dts [0]
no fuel gauge found
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0

[15:52:52.558]收←◆[LZN DEBUG] Normal boot, power adc key pressed.
[LZN Patch] receive power key, going to system.
[LZN Patch] current BT_HOST_WAKE(GPIO3_C6) status : 0.
[LZN Patch] current BT_PCM_OUT(GPIO0_B6) status : 1.

[15:52:52.673]收←◆[LZN Patch] current PANEL_UPDOWN(GPIO0_D1) status : 1.
[LZN Patch] current WIFI_BT-EN(GPIO0_D6) status : 1.
Hit any key to stop autoboot:  0

[15:52:55.390]收←◆load fdt from resouce.
Secure Boot state: 0
kernel @ 0x62000000 (0x007ad700)
ramdisk  @ 0x65bf0000 (0x00130834)
bootrk: do_bootm_linux...
Loading Device Tree to 65600000, end 65617d8b ... OK
Add bank:0000000060000000, 0000000040000000

[15:52:55.478]收←◆
Starting kernel ...

13666580037 · 发表于 2026-3-14 14:03

zhengzhanqiang 发表于 2021-5-26 04:39
谢谢分享

求固件包

liufei33875699 · 发表于 2026-4-13 15:05

啊实打实

nitaiyoucaile · 发表于 2026-5-13 18:52

78278000 发表于 2022-11-26 19:42
奇异果q9 5G版楼主的版号是3128H-5G-3.0
我的是3128H-5G-2.0，不知道是不是这个原因，刷后反复重启 ...

包在那

保安镇 · 发表于 2026-5-16 20:21

刷了之后遥控器失效了，怎么处理

› 你问我答 / 玩机教程 / 固件 › ZNDS刷机/救砖

首发！瑞芯微RK3128H系列通刷教程

首发！瑞芯微RK3128H系列通刷教程

浏览过的版块

站长推荐 /1