海兔烧写错误信息:
Bootrom start
Boot Media: NAND
##############################################
Decrypt auxiliary code ...OK
lsadc voltage min: 000002FB, max: 00000306, aver: 000002FF, index: 00000001
Failed to send the boot data.
1. The system fails to run properly due to an error in boot code compilation.
2. If the secure boot function is disabled and boot rootkey is set for the OEM, the boot image is encrypted, but the boot rootkey used for encrypting the boot is different from the boot rootkey burnt to the OTP.
Timeout error.
3. The chip OTP is set to forcibly decrypt the boot image. However, the boot is not correctly encrypted.
4. The board DDR is faulty.
5. The boot code does not support the type of the flash memory to be burnt. If the boot print function is enabled, you can view the printing information through the serial port, showing that the current flash memory type is not supported.
Failed to send the head frame.
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16
Reg Version: v1.5.2`
Reg Time: 2018/10/10 16:14:27
Reg Name: hi3798m3hdms1_hi3798mv300h_DDR3-1866_1GB_16bitx2_2layers_cm.re5
请检查当前programmer或boot是否与单板匹配。
Failed to download fastboot!
|
网站导航
楼主: 胡国顺
楼主
发表于 2021-3-10 11:39
znds.com 
