ZNDS智能电视网 推荐当贝市场

TV应用下载 / 资源分享区

软件下载 | 游戏 | 讨论 | 电视计算器

综合交流 / 评测 / 活动区

交流区 | 测硬件 | 网站活动 | Z币中心

新手入门 / 进阶 / 社区互助

新手 | 你问我答 | 免费刷机救砖 | ROM固件

查看: 30487|回复: 3
上一主题 下一主题
[移动魔百和]

CM201-2-CH刷机不成功。

[复制链接]
跳转到指定楼层
楼主
发表于 2021-2-27 00:40 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式
本帖最后由 肖元元 于 2021-2-27 11:40 编辑

DMA: preallocated 256 KiB pool for atomiccoherent allocations
hw-breakpoint: found 5 (+1 reserved)breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8bytes.
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000(irq = 81, base_baud = 0) is a PL011 r                                                                                       ev2
console [ttyAMA0] enabled
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000(irq = 83, base_baud = 0) is a PL011 r                                                                                       ev2
f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000(irq = 84, base_baud = 0) is a PL011 r                                                                                       ev2
pl061_gpio gpio0: PL061 GPIO chip@0xf8b20000 registered
pl061_gpio gpio1: PL061 GPIO chip@0xf8b21000 registered
pl061_gpio gpio2: PL061 GPIO chip@0xf8b22000 registered
pl061_gpio gpio3: PL061 GPIO chip@0xf8b23000 registered
pl061_gpio gpio4: PL061 GPIO chip@0xf8b24000 registered
pl061_gpio gpio5: PL061 GPIO chip@0xf8004000 registered
pl061_gpio gpio6: PL061 GPIO chip@0xf8b26000 registered
pl061_gpio gpio7: PL061 GPIO chip@0xf8b27000 registered
pl061_gpio gpio8: PL061 GPIO chip@0xf8b28000 registered
pl061_gpio gpio9: PL061 GPIO chip@0xf8b29000 registered
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver,device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registersfrom 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump withrealtime priority
usbcore: registered new interface driverusbfs
usbcore: registered new interface driverhub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
hisi_iommu_ptable_addr:phy 0x1d800000    size:0x400000
hisi_iommu_err_rdaddr :phy 0x1de0a200    size:0x200
hisi_iommu_err_wraddr :phy 0x1de0a400     size:0x200
in hisi_iommu_domain_init start
in hisi_iommu_domain_init end
Advanced Linux Sound Architecture DriverInitialized.
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connectionmanager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource clk24M
NET: Registered protocol family 2
TCP established hash table entries: 4096(order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order:3, 32768 bytes)
TCP: Hash tables configured (established4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192bytes)
UDP-Lite hash table entries: 256 (order: 1,8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transportmodule.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchanneltransport module.
Trying to unpack rootfs image asinitramfs...
Freeing initrd memory: 464K (c4000000 -c4074000)
hw perfevents: enabled witharmv7_cortex_a17 PMU driver, 7 counters available
CPU PMU: attempt to register multiple PMUdevices!
arm-pmu: probe of arm-pmu failed with error-28
futex hash table entries: 1024 (order: 4,65536 bytes)
audit: initializing netlink subsys(disabled)
audit: type=2000 audit(0.315:1):initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) PhillipLougher
jffs2: version 2.2. (NAND) © 2001-2006 RedHat, Inc.
fuse init (API version 7.23)
msgmni has been set to 940
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driverversion 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
zram: Created 1 device(s) ...
hifmc100: registerd new interface driverhifmc100.
[MU]Resource: Device for DMA MappingLocated
[MU]Resource: io_base physical =0xF9950000, Size 256
[MU]Resource: buffer physical  = 0xFE200000, Size 8566
hifmc100: Found flash memory controllerhifmc100.
hifmc100: no found nand device.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky<maxk@qualcomm.com>
FEPHY:addr=2, la_am=0xc, ldo_am=0x3,r_tuning=0x1c
libphy: himii: probed
hi_eth: attached port 0 PHY 2 to driverHiSilicon Festa s28v113
libphy: himii: probed
hi_eth: hieth_mdiobus_read,73:mdio busy
hi_eth: connect to port[0] PHY failed!
hi_eth: no dev probed!
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driverasix
usbcore: registered new interface driverax88179_178a
usbcore: registered new interface drivercdc_ether
usbcore: registered new interface driverdm9601
usbcore: registered new interface drivernet1080
usbcore: registered new interface drivercdc_subset
usbcore: registered new interface driverzaurus
usbcore: registered new interface drivercdc_ncm
ehci_hcd: USB 2.0 'Enhanced' HostController (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller(OHCI) Driver
usbcore: registered new interface drivercdc_wdm
usbcore: registered new interface driverusb-storage
usbcore: registered new interface driverusbserial
usbcore: registered new interface driveroption
usbserial: USB Serial support registeredfor GSM modem (1-port)
hiudc: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Dedicated Tx FIFOs mode
file system registered
mousedev: PS/2 mouse device common for allmice
i2c /dev entries driver
usbcore: registered new interface driveruvcvideo
USB Video Class driver (1.1.1)
sp805-wdt f8a2c000.watchdog: registrationsuccessful
device-mapper: ioctl: 4.28.0-ioctl(2014-09-17) initialised: dm-devel@redhat.com
f9820000.himciv200.SD: eMMC/MMC/SD DeviceNOT detected!
mmc0: BKOPS_EN bit is not set
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 HBD08G 7.28 GiB
mmcblk0boot0: mmc0:0001 HBD08G partition 14.00 MiB
mmcblk0boot1: mmc0:0001 HBD08G partition 24.00 MiB
mmcblk0rpmb: mmc0:0001 HBD08G partition 34.00 MiB
mmcblk0: p1(fastboot) p2(bootargs)p3(recovery) p4(deviceinfo) p5(baseparam) p6                                                                                       (pqparam) p7(logo) p8(logobak) p9(fastplay) p10(fastplaybak) p11(kernel)p12(mis                                                                                       c) p13(trustedcore) p14(backup) p15(system) p16(cache) p17(private)p18(securest                                                                                       ore)p19(userdata)
f9c40000.himciv200.SD: eMMC/MMC/SD DeviceNOT detected!
hidraw: raw HID events driver (C) JiriKosina
usbcore: registered new interface driverusbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
input: Hi keyboard as/devices/virtual/input/input0
input: Hi mouse as /devices/virtual/input/input1
input: qwerty as/devices/virtual/input/input2
Hi Android vinput driver init successful!
hiotg: registered new interface otg driver
Registering sdcardfs 2.1.3
vdd-gpu: 200 <--> 860 mV at 1060 mV
Mali: Mali device driver loaded
usbcore: registered new interface driversnd-usb-audio
oprofile: using timer interrupt.
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
   Performance counters on
   input device check on
   Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (15058 buckets,60232 max)
ctnetlink v0.93: registering withnfnetlink.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured(size=4096, memory=32Kbytes)
IPVS: Creating netns size=792 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter CoreTeam
ipt_CLUSTERIP: ClusterIP Version 0.8 loadedsuccessfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter CoreTeam
NET: Registered protocol family 17
bridge: automatic filtering viaarp/ip/ip6tables has been deprecated. Update you                                                                                       r scripts to load br_netfilter if you need this.
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation)ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11drivers
Registering SWP/SWPB emulation handler
hisi-sndcard hisi-sndcard: aiao-hifi<-> hisi-i2s mapping ok
ALSA device list:
  #0:HISI-AIAO
Freeing unused kernel memory: 596K(c10e0000 - c1175000)
init: /init.bigfish.rc: 55: invalid command'getprop'
init: /init.bigfish.rc: 114: invalid option'sdcard_r'
init: /init.bigfish.rc: 239: invalid option'//add'
init: /init.bigfish.rc: 425: invalidcommand '//insmod'
init (1): /proc/1/oom_adj is deprecated,please use /proc/1/oom_score_adj instea                                                                                        d.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p15): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p19): warning: mounting fswith errors, running e2fsck is recomm                                                                                       ended
EXT4-fs (mmcblk0p19): recovery complete
EXT4-fs (mmcblk0p19): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p16): recovery complete
EXT4-fs (mmcblk0p16): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p17): recovery complete
EXT4-fs (mmcblk0p17): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p18): VFS: Can't find ext4 filesystem
init: /dev/hw_random not found
healthd: wakealarm_init: timerfd_createfailed
init: cannot find '/system/bin/rild',disabling 'ril-daemon'
init: cannot find'/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find'/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/frontPanel',disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt',disabling 'blueangel'
init: cannot find '/system/bin/dtvserver',disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver',disabling 'usb-driver'
init: cannot find'/system/bin/basicService', disabling 'basicService'
sdcardfs: version 2.1.3
sdcardfs: dev_name -> /data/media
sdcardfs: options ->fsuid=1023,fsgid=1023,mask=0,userid=0,gid=1015,reserved_mb=                                                                                        20
sdcardfs: mounted on top of /data/mediatype ext4
random: init urandom read with 73 bits ofentropy available
init: property 'sys.powerctl' doesn't existwhile expanding '${sys.powerctl}'
init: powerctl: cannot expand'${sys.powerctl}'
init: property'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${s                                                                                       ys.sysctl.extra_free_kbytes}'
init: cannot expand'${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sy                                                                                       s/vm/extra_free_kbytes'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
Login: ====write bit delay
======== Card detection to detect SDIOcard! ========
[rfkill]: sw_rfkill_init
rtk_btusb: RTKBT_RELEASE_NAME:20200318_TV_ANDROID_4.4(Beta)
rtk_btusb: Realtek Bluetooth USB drivermodule init, version 4.2.1
rtk_btusb: Register usb char deviceinterface for BT driver
usbcore: registered new interface driverrtk_btusb
BTMTK_init
proc initialized
major number:246
BT_majorfwlog number: 245
BT_chrdev driver(major 246) installed.
BT_chrdevfwlog driver(major 245) installed.
BTMTK_init: BT_major 246, BT_majorfwlog 245
BTMTK_init: devID 257949696, devIDfwlog256901120
SDIO Driver Registration Success
IPv6: ADDRCONF(NETDEV_UP): eth0: link isnot ready
[14:39:52:404ERROR-HI_CIPHER]:HI_DRV_CIPHER_LoadHdcpKey[167]:Invalid head of B1                                                                                        ~B3!
init: property 'persist.sys.ch.live.start'doesn't exist while expanding '${pers                                                                                       ist.sys.ch.live.start}'
init: cannot expand'${persist.sys.ch.live.start}' while assigning to 'media.hp.                                                                                       hls.live.start'
[14:39:52:429ERROR-HI_HDMI]:DRV_HDMI_KeyLoad[4207]:Load hdcp key error!


Welcome to HiAndroid


ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI HostController
ehci-platform f9890000.ehci: new USB busregistered, assigned bus number 1
ehci-platform f9890000.ehci: irq 98, io mem0xf9890000
zram0: detected capacity change from 0 to104857600
Welcome to samepkg
card connected!
chipname is Hi3798MV300H
ehci-platform f9890000.ehci: USB 2.0started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
random: nonblocking pool is initialized
ohci-platform: OHCI generic platform driver
Adding 102396k swap on/dev/block/zram0.  Priority:-1 extents:1across:102396k S                                                                                       S
himciv200 f9c40000.himciv200.SD: cardclaims to support voltages below defined r                                                                                       ange
ohci-platform f9880000.ohci: GenericPlatform OHCI controller
ohci-platform f9880000.ohci: new USB busregistered, assigned bus number 2
ohci-platform f9880000.ohci: irq 99, io mem0xf9880000
scan edges:3 p2f:5 f2p:8
mix set temp-phase 2
scan elemnts: startp:64 endp:59
Tuning SampleClock. mix set phase:[03/07]ele:[05/08]
mmc2: new ultra high speed SDR104 SDIO cardat address 0001
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
tntfs: module license 'Commercial. Forsupport email ntfs-support@tuxera.com.' t                                                                                       aints kernel.
Disabling lock debugging due to kerneltaint
Tuxera NTFS driver 3017.7.4.6 [Flags: R/WMODULE].
Built against headers 3.18.24_hi3798mv310#1 SMP Fri Mar 16 11:11:20 CST 2018 ar                                                                                       m
Running on kernel 3.18.24_hi3798mv310 #1SMP Tue Aug 11 20:50:17 CST 2020 armv7l
init: sys_prop: permission denieduid:1000  name:ro.config.gfx2d_compose
usb 1-2: new high-speed USB device number 2using ehci-platform
usb-storage 1-2:1.0: USB Mass Storagedevice detected
TianlaiInitThread start
scsi host0: usb-storage 1-2:1.0
wifi detected: rtl8822cs
TianlaiInitThread end
scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI:2
sd 0:0:0:0: [sda] 3973120 512-byte logical blocks:(2.03 GB/1.89 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode pagefound
sd 0:0:0:0: [sda] Assuming drive cache:write through
sda:sda1
sd 0:0:0:0: [sda] Attached SCSI removabledisk
EXT4-fs error (device mmcblk0p19):__ext4_new_inode:1016: comm installd: failed                                                                                        to insert inode 114591: doubly allocated?
Aborting journal on device mmcblk0p19-8.
EXT4-fs (mmcblk0p19): Remounting filesystemread-only
EXT4-fs error (device mmcblk0p19) inext4_symlink:2924: IO failure
RESTORE_DEVICE=mmcblk0
EXT4 on Dev mmcblk0p19 error !! Enterwipe_data
reboot: Restarting system
CPU will restart.
Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16

Reg Version:  v1.5.2`
Reg Time:     2018/10/10 16:14:27
Reg Name:     hi3798m3hdms1_hi3798mv300h_DDR3-1866_1GB_16bitx2_2layers_cm.re5

Set cpu freq

Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Compressed-boot v1.0.0
Uncompress...........................Ok


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (jenkins@ubuntu) (May 082019 - 12:07:56)

Fastboot:      Version 3.3.0
Build Date:    May 8 2019, 12:09:14
CPU:           Hi3798Mv300H
Boot Media:    eMMC
DDR Size:      1GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:2 p2f:5 f2p:7
mix set temp-phase 2
scan elemnts: startp:106 endp:101
Tuning SampleClock. mix set phase:[02/07]ele:[07/16]
MMC/SD Card:
   MID:         0xd6
   Read Block:  512 Bytes
   Write Block: 512 Bytes
   Chip Size:   7456M Bytes (HighCapacity)
   Name:        "HBD08G"
   Chip Type:   MMC
   Version:     5.1
   Speed:       100000000Hz
   Mode:        HS400
   Voltage:     1.8V
   Bus Width:   8bit
   Boot Addr:   0 Bytes
Net:  up

Boot Env on eMMC
   Env Offset:          0x00400000
   Env Size:            0x00010000
   Env Range:           0x00010000


SDK Version:HiSTBAndroidV600R003C01SPC031_patch4

check remote recovery button begin
selinux_flag is androidboot.selinux=
bootargs:console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(bootargs),12                                                                                       M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logobak),40M(                                                                                       fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),800M(backup),8                                                                                       00M(system),500M(cache),50M(private),8M(securestore),-(userdata)
==Enter recovery!
recoverybootargs:console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(boot                                                                                       args),12M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logob                                                                                       ak),40M(fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),800M(b                                                                                       ackup),800M(system),500M(cache),50M(private),8M(securestore),-(userdata)
Automatic boot of image at addr 0x01000000...
Wrong Image Format for bootm command
ERROR: can't get kernel image!
recovery bootm failed!
enter recovery fail!!
mac:B4:60:77:10:F7:59
Reserve Memory
   Start Addr:          0x3FFFE000
   Bound Addr:          0x8D94000
   Free  Addr:          0x3F290000
   Alloc Block:  Addr         Size
                 0x3FBFD000   0x400000
                  0x3F8FC000   0x300000
                  0x3F8F9000   0x2000
                  0x3F878000   0x80000
                  0x3F876000   0x1000
                  0x3F775000   0x100000
                  0x3F622000   0x152000
                  0x3F29C000   0x385000
                  0x3F29A000   0x1000
                  0x3F290000   0x9000

Press Ctrl+C to stop autoboot

MMC read: dev # 0, block # 327680, count20480 ... 20480 blocks read: OK

152126276 Bytes/s

Found Initrd at 0x04000000 (Size 472726Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at01ffffc0 ...
  Image Name:  Linux-3.18.24_hi3798mv310
  Image Type:   ARM Linux KernelImage (uncompressed)
  Data Size:    8611132 Bytes = 8.2MiB
  Load Address: 02000000
  Entry Point:  02000000
  XIP Kernel Image ... OK
OK
ATAGS [0x00000100 - 0x000004A4], 932Bytes

Starting kernel ...

Uncompressing Linux... done, booting thekernel.
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.24_hi3798mv3x(jiangman@ubuntu) (gcc version 4.9.4 (gcc-linar                                                                                       o-4.9-2017.01 + glibc-2.27 Build by czyong Thu Mar 29 22:12:18 CST 2018)) #1 SM                                                                                       P Tue Aug 11 20:50:17 CST 2020
CPU: ARMv7 Processor [410fd034] revision 4(ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache,VIPT aliasing instruction cache
initmrd: found no initmrd.
Machine model: Hisilicon
cma: Reserved 44 MiB at 0x3c400000
cma: Reserved 4 MiB at 0x3fc00000
Memory policy: Data cache writealloc
PERCPU: Embedded 10 pages/cpu @debc2000s11648 r8192 d21120 u40960
Built 1 zonelists in Zone order, mobilitygrouping on.  Total pages: 261144
Kernel command line: console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(                                                                                       bootargs),12M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(l                                                                                       ogobak),40M(fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),80                                                                                       0M(backup),800M(system),500M(cache),50M(private),8M(securestore),-(userdata)ini                                                                                       trd=0x4000000,0x73696mem=1G mmz=ddr,0,0,44M
log_buf_len individual max cpucontribution: 4096 bytes
log_buf_len total cpu_extra contributions:12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14104(86%)
PID hash table entries: 2048 (order: 1,8192 bytes)
Dentry cache hash table entries: 65536(order: 6, 262144 bytes)
Inode-cache hash table entries: 32768(order: 5, 131072 bytes)
Memory: 963296K/1048576K available (13037Kkernel code, 1643K rwdata, 4208K roda                                                                                       ta, 599K init, 2143K bss, 85280K reserved, 482268K highmem)
Virtual kernel memory layout:
   vector  : 0xffff0000 -0xffff1000   (   4 kB)
   fixmap  : 0xffc00000 -0xfff00000   (3072 kB)
   vmalloc : 0xdf800000 - 0xff000000  ( 504 MB)
   lowmem  : 0xc0000000 -0xdf400000   ( 500 MB)
   pkmap   : 0xbfe00000 -0xc0000000   (   2 MB)
   modules : 0xbf000000 - 0xbfe00000  (  14 MB)
     .text : 0xc0008000 - 0xc10df7c4  (17246 kB)
     .init : 0xc10e0000 - 0xc1175d80  ( 600 kB)
     .data : 0xc1176000 - 0xc1310fdc  (1644 kB)
      .bss : 0xc1310fdc - 0xc1528fcc  (2144 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0,CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:352
sched_clock: 32 bits at 24MHz, resolution41ns, wraps every 178956969942ns
Console: colour dummy device 80x30
Calibrating delay loop... 2383.87 BogoMIPS(lpj=1191936)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Mount-cache hash table entries: 1024(order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024(order: 0, 4096 bytes)
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
ftrace: allocating 43895 entries in 129pages
CPU0: thread -1, cpu 0, socket 0, mpidr80000000
Setting up static identity map for 0xbcb620- 0xbcb678
CPU: hi3798mv300h
CPU1: thread -1, cpu 1, socket 0, mpidr80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated(9572.35 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41architecture 3 part 40 variant 3 rev 4
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomiccoherent allocations
hw-breakpoint: found 5 (+1 reserved)breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8bytes.
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000(irq = 81, base_baud = 0) is a PL011 r                                                                                       ev2
console [ttyAMA0] enabled
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000(irq = 83, base_baud = 0) is a PL011 r                                                                                       ev2
f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000(irq = 84, base_baud = 0) is a PL011 r                                                                                        ev2
pl061_gpio gpio0: PL061 GPIO chip@0xf8b20000 registered
pl061_gpio gpio1: PL061 GPIO chip@0xf8b21000 registered
pl061_gpio gpio2: PL061 GPIO chip@0xf8b22000 registered
pl061_gpio gpio3: PL061 GPIO chip@0xf8b23000 registered
pl061_gpio gpio4: PL061 GPIO chip@0xf8b24000 registered
pl061_gpio gpio5: PL061 GPIO chip@0xf8004000 registered
pl061_gpio gpio6: PL061 GPIO chip@0xf8b26000 registered
pl061_gpio gpio7: PL061 GPIO chip@0xf8b27000 registered
pl061_gpio gpio8: PL061 GPIO chip@0xf8b28000 registered
pl061_gpio gpio9: PL061 GPIO chip@0xf8b29000 registered
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver,device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registersfrom 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump withrealtime priority
usbcore: registered new interface driverusbfs
usbcore: registered new interface driverhub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
hisi_iommu_ptable_addr:phy 0x1d800000    size:0x400000
hisi_iommu_err_rdaddr :phy 0x1e604200    size:0x200
hisi_iommu_err_wraddr :phy 0x1e604400     size:0x200
in hisi_iommu_domain_init start
in hisi_iommu_domain_init end
Advanced Linux Sound Architecture DriverInitialized.
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connectionmanager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource clk24M
NET: Registered protocol family 2
TCP established hash table entries: 4096(order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order:3, 32768 bytes)
TCP: Hash tables configured (established4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192bytes)
UDP-Lite hash table entries: 256 (order: 1,8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transportmodule.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchanneltransport module.
Trying to unpack rootfs image asinitramfs...
Freeing initrd memory: 464K (c4000000 -c4074000)
hw perfevents: enabled with armv7_cortex_a17PMU driver, 7 counters available
CPU PMU: attempt to register multiple PMUdevices!
arm-pmu: probe of arm-pmu failed with error-28
futex hash table entries: 1024 (order: 4,65536 bytes)
audit: initializing netlink subsys(disabled)
audit: type=2000 audit(0.316:1):initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) PhillipLougher
jffs2: version 2.2. (NAND) © 2001-2006 RedHat, Inc.
fuse init (API version 7.23)
msgmni has been set to 940
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driverversion 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
zram: Created 1 device(s) ...
hifmc100: registerd new interface driverhifmc100.
[MU]Resource: Device for DMA MappingLocated
[MU]Resource: io_base physical =0xF9950000, Size 256
[MU]Resource: buffer physical  = 0xFE200000, Size 8566
hifmc100: Found flash memory controllerhifmc100.
hifmc100: no found nand device.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky<maxk@qualcomm.com>
FEPHY:addr=2, la_am=0xc, ldo_am=0x3,r_tuning=0x1c
libphy: himii: probed
hi_eth: attached port 0 PHY 2 to driverHiSilicon Festa s28v113
libphy: himii: probed
hi_eth: hieth_mdiobus_read,73:mdio busy
hi_eth: connect to port[0] PHY failed!
hi_eth: no dev probed!
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driverasix
usbcore: registered new interface driverax88179_178a
usbcore: registered new interface drivercdc_ether
usbcore: registered new interface driverdm9601
usbcore: registered new interface drivernet1080
usbcore: registered new interface drivercdc_subset
usbcore: registered new interface driverzaurus
usbcore: registered new interface drivercdc_ncm
ehci_hcd: USB 2.0 'Enhanced' HostController (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller(OHCI) Driver
usbcore: registered new interface drivercdc_wdm
usbcore: registered new interface driverusb-storage
usbcore: registered new interface driverusbserial
usbcore: registered new interface driveroption
usbserial: USB Serial support registeredfor GSM modem (1-port)
hiudc: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Dedicated Tx FIFOs mode
file system registered
mousedev: PS/2 mouse device common for allmice
i2c /dev entries driver
usbcore: registered new interface driveruvcvideo
USB Video Class driver (1.1.1)
sp805-wdt f8a2c000.watchdog: registrationsuccessful
device-mapper: ioctl: 4.28.0-ioctl(2014-09-17) initialised: dm-devel@redhat.com
f9820000.himciv200.SD: eMMC/MMC/SD DeviceNOT detected!
mmc0: BKOPS_EN bit is not set
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 HBD08G 7.28 GiB
mmcblk0boot0: mmc0:0001 HBD08G partition 14.00 MiB
mmcblk0boot1: mmc0:0001 HBD08G partition 24.00 MiB
mmcblk0rpmb: mmc0:0001 HBD08G partition 34.00 MiB
mmcblk0: p1(fastboot) p2(bootargs)p3(recovery) p4(deviceinfo) p5(baseparam) p6                                                                                       (pqparam)p7(logo) p8(logobak) p9(fastplay) p10(fastplaybak) p11(kernel) p12(mis                                                                                       c) p13(trustedcore) p14(backup) p15(system) p16(cache) p17(private)p18(securest                                                                                       ore) p19(userdata)
f9c40000.himciv200.SD: eMMC/MMC/SD DeviceNOT detected!
hidraw: raw HID events driver (C) JiriKosina
usbcore: registered new interface driverusbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
input: Hi keyboard as/devices/virtual/input/input0
input: Hi mouse as/devices/virtual/input/input1
input: qwerty as/devices/virtual/input/input2
Hi Android vinput driver init successful!
hiotg: registered new interface otg driver
Registering sdcardfs 2.1.3
vdd-gpu: 200 <--> 860 mV at 1060 mV
Mali: Mali device driver loaded
usbcore: registered new interface driversnd-usb-audio
oprofile: using timer interrupt.
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
   Performance counters on
    inputdevice check on
   Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (15058 buckets,60232 max)
ctnetlink v0.93: registering withnfnetlink.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured(size=4096, memory=32Kbytes)
IPVS: Creating netns size=792 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter CoreTeam
ipt_CLUSTERIP: ClusterIP Version 0.8 loadedsuccessfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter CoreTeam
NET: Registered protocol family 17
bridge: automatic filtering viaarp/ip/ip6tables has been deprecated. Update you                                                                                        rscripts to load br_netfilter if you need this.
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation)ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11drivers
Registering SWP/SWPB emulation handler
hisi-sndcard hisi-sndcard: aiao-hifi<-> hisi-i2s mapping ok
ALSA device list:
  #0:HISI-AIAO
Freeing unused kernel memory: 596K(c10e0000 - c1175000)
init: /init.bigfish.rc: 55: invalid command'getprop'
init: /init.bigfish.rc: 114: invalid option'sdcard_r'
init: /init.bigfish.rc: 239: invalid option'//add'
init: /init.bigfish.rc: 425: invalidcommand '//insmod'
init (1): /proc/1/oom_adj is deprecated,please use /proc/1/oom_score_adj instea                                                                                       d.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p15): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs warning (device mmcblk0p19):ext4_clear_journal_err:4711: Filesystem err                                                                                       or recorded from previous mount: IO failure
EXT4-fs warning (device mmcblk0p19):ext4_clear_journal_err:4712: Marking fs in                                                                                        need of filesystem check.
EXT4-fs (mmcblk0p19): warning: mounting fswith errors, running e2fsck is recomm                                                                                        ended
EXT4-fs (mmcblk0p19): recovery complete
EXT4-fs (mmcblk0p19): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p16): recovery complete
EXT4-fs (mmcblk0p16): mounted filesystem withordered data mode. Opts: (null)
EXT4-fs (mmcblk0p17): recovery complete
EXT4-fs (mmcblk0p17): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p18): VFS: Can't find ext4filesystem
init: /dev/hw_random not found
healthd: wakealarm_init: timerfd_createfailed
init: cannot find '/system/bin/rild',disabling 'ril-daemon'
init: cannot find'/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find'/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/frontPanel',disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt',disabling 'blueangel'
init: cannot find '/system/bin/dtvserver',disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver',disabling 'usb-driver'
init: cannot find '/system/bin/basicService',disabling 'basicService'
sdcardfs: version 2.1.3
sdcardfs: dev_name -> /data/media
sdcardfs: options ->fsuid=1023,fsgid=1023,mask=0,userid=0,gid=1015,reserved_mb=                                                                                       20
sdcardfs: mounted on top of /data/mediatype ext4
random: init urandom read with 77 bits ofentropy available
init: property 'sys.powerctl' doesn't existwhile expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${s                                                                                       ys.sysctl.extra_free_kbytes}'
init: cannot expand'${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sy                                                                                       s/vm/extra_free_kbytes'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
Login: healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
====write bit delay
======== Card detection to detect SDIOcard! ========
[rfkill]: sw_rfkill_init
rtk_btusb: RTKBT_RELEASE_NAME:20200318_TV_ANDROID_4.4(Beta)
rtk_btusb: Realtek Bluetooth USB drivermodule init, version 4.2.1
rtk_btusb: Register usb char deviceinterface for BT driver
usbcore: registered new interface driverrtk_btusb
BTMTK_init
proc initialized
major number:246
BT_majorfwlog number: 245
BT_chrdev driver(major 246) installed.
BT_chrdevfwlog driver(major 245) installed.
BTMTK_init: BT_major 246, BT_majorfwlog 245
BTMTK_init: devID 257949696, devIDfwlog256901120
SDIO Driver Registration Success
init: property 'persist.sys.ch.live.start'doesn't exist while expanding '${pers                                                                                       ist.sys.ch.live.start}'
IPv6: ADDRCONF(NETDEV_UP): eth0: link isnot ready
[14:39:52:402ERROR-HI_CIPHER]:HI_DRV_CIPHER_LoadHdcpKey[167]:Invalid head of B1                                                                                       ~B3!
[14:39:52:402ERROR-HI_HDMI]:DRV_HDMI_KeyLoad[4207]:Load hdcp key error!
card connected!
Welcome to samepkg
init: cannot expand'${persist.sys.ch.live.start}' while assigning to 'media.hp.                                                                                       hls.live.start'
chipname is Hi3798MV300H
himciv200 f9c40000.himciv200.SD: cardclaims to support voltages below defined r                                                                                       ange
random: nonblocking pool is initialized


Welcome to HiAndroid


ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI HostController
ehci-platform f9890000.ehci: new USB busregistered, assigned bus number 1
ehci-platform f9890000.ehci: irq 98, io mem0xf9890000
zram0: detected capacity change from 0 to104857600
scan edges:3 p2f:5 f2p:8
mix set temp-phase 2
scan elemnts: startp:72 endp:67
Tuning SampleClock. mix set phase:[03/07]ele:[06/09]
mmc2: new ultra high speed SDR104 SDIO cardat address 0001
ehci-platform f9890000.ehci: USB 2.0started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: GenericPlatform OHCI controller
Adding 102396k swap on/dev/block/zram0.  Priority:-1 extents:1across:102396k S                                                                                        S
ohci-platform f9880000.ohci: new USB busregistered, assigned bus number 2
ohci-platform f9880000.ohci: irq 99, io mem0xf9880000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
tntfs: module license 'Commercial. Forsupport email ntfs-support@tuxera.com.' t                                                                                       aints kernel.
Disabling lock debugging due to kerneltaint
Tuxera NTFS driver 3017.7.4.6 [Flags: R/WMODULE].
Built against headers 3.18.24_hi3798mv310#1 SMP Fri Mar 16 11:11:20 CST 2018 ar                                                                                       m
Running on kernel 3.18.24_hi3798mv310 #1SMP Tue Aug 11 20:50:17 CST 2020 armv7l
init: sys_prop: permission denieduid:1000  name:ro.config.gfx2d_compose
usb 1-2: new high-speed USB device number 2using ehci-platform
usb-storage 1-2:1.0: USB Mass Storagedevice detected
scsi host0: usb-storage 1-2:1.0
TianlaiInitThread start
wifi detected: rtl8822cs
TianlaiInitThread end
scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI:2
sd 0:0:0:0: [sda] 3973120 512-byte logicalblocks: (2.03 GB/1.89 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode pagefound
sd 0:0:0:0: [sda] Assuming drive cache:write through
sda:sda1
sd 0:0:0:0: [sda] Attached SCSI removabledisk
EXT4-fs error (device mmcblk0p19):ext4_free_inode:346: comm installd: bit alrea                                                                                        dycleared for inode 114591
Aborting journal on device mmcblk0p19-8.
EXT4-fs (mmcblk0p19): Remounting filesystemread-only
EXT4-fs error (device mmcblk0p19) inext4_evict_inode:310: IO failure
RESTORE_DEVICE=mmcblk0
EXT4 on Dev mmcblk0p19 error !! Enterwipe_data
reboot: Restarting system
CPU will restart.
Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16

Reg Version:  v1.5.2`
Reg Time:     2018/10/10 16:14:27
Reg Name:    hi3798m3hdms1_hi3798mv300h_DDR3-1866_1GB_16bitx2_2layers_cm.re5

Set cpu freq

Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Compressed-boot v1.0.0
Uncompress...........................Ok


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (jenkins@ubuntu) (May 082019 - 12:07:56)

Fastboot:      Version 3.3.0
Build Date:    May 8 2019, 12:09:14
CPU:           Hi3798Mv300H
Boot Media:    eMMC
DDR Size:      1GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:2 p2f:5 f2p:7
mix set temp-phase 2
scan elemnts: startp:106 endp:101
Tuning SampleClock. mix set phase:[02/07]ele:[07/16]
MMC/SD Card:
   MID:         0xd6
   Read Block:  512 Bytes
   Write Block: 512 Bytes
   Chip Size:   7456M Bytes (HighCapacity)
   Name:        "HBD08G"
   Chip Type:   MMC
    Version:    5.1
   Speed:       100000000Hz
   Mode:        HS400
   Voltage:     1.8V
   Bus Width:   8bit
   Boot Addr:   0 Bytes
Net:  up

Boot Env on eMMC
   Env Offset:          0x00400000
   Env Size:            0x00010000
   Env Range:           0x00010000


SDK Version:HiSTBAndroidV600R003C01SPC031_patch4

check remote recovery button begin
selinux_flag is androidboot.selinux=
bootargs:console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(bootargs),12                                                                                        M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logobak),40M(                                                                                       fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),800M(backup),8                                                                                       00M(system),500M(cache),50M(private),8M(securestore),-(userdata)
==Enter recovery!
recoverybootargs:console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(boot                                                                                       args),12M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logob                                                                                        ak),40M(fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),800M(b                                                                                       ackup),800M(system),500M(cache),50M(private),8M(securestore),-(userdata)
Automatic boot of image at addr 0x01000000...
Wrong Image Format for bootm command
ERROR: can't get kernel image!
recovery bootm failed!
enter recovery fail!!
mac:B4:60:77:10:F7:59
Reserve Memory
   Start Addr:          0x3FFFE000
   Bound Addr:          0x8D94000
   Free  Addr:          0x3F290000
   Alloc Block:  Addr         Size
                  0x3FBFD000   0x400000
                  0x3F8FC000   0x300000
                  0x3F8F9000   0x2000
                  0x3F878000   0x80000
                  0x3F876000   0x1000
                  0x3F775000   0x100000
                  0x3F622000   0x152000
                  0x3F29C000   0x385000
                  0x3F29A000   0x1000
                  0x3F290000   0x9000

Press Ctrl+C to stop autoboot

MMC read: dev # 0, block # 327680, count20480 ... 20480 blocks read: OK

152126276 Bytes/s

Found Initrd at 0x04000000 (Size 472726Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at01ffffc0 ...
  Image Name:  Linux-3.18.24_hi3798mv310
  Image Type:   ARM Linux KernelImage (uncompressed)
  Data Size:    8611132 Bytes = 8.2MiB
  Load Address: 02000000
  Entry Point:  02000000
  XIP Kernel Image ... OK
OK
ATAGS [0x00000100 - 0x000004A4], 932Bytes

Starting kernel ...

Uncompressing Linux... done, booting thekernel.
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.24_hi3798mv3x(jiangman@ubuntu) (gcc version 4.9.4 (gcc-linar                                                                                       o-4.9-2017.01 + glibc-2.27 Build by czyong Thu Mar 29 22:12:18 CST 2018)) #1 SM                                                                                       P Tue Aug 11 20:50:17CST 2020
CPU: ARMv7 Processor [410fd034] revision 4(ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache,VIPT aliasing instruction cache
initmrd: found no initmrd.
Machine model: Hisilicon
cma: Reserved 44 MiB at 0x3c400000
cma: Reserved 4 MiB at 0x3fc00000
Memory policy: Data cache writealloc
PERCPU: Embedded 10 pages/cpu @debc2000s11648 r8192 d21120 u40960
Built 1 zonelists in Zone order, mobilitygrouping on.  Total pages: 261144
Kernel command line: console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(                                                                                       bootargs),12M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(l                                                                                        ogobak),40M(fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),80                                                                                       0M(backup),800M(system),500M(cache),50M(private),8M(securestore),-(userdata)ini                                                                                       trd=0x4000000,0x73696 mem=1G mmz=ddr,0,0,44M
log_buf_len individual max cpucontribution: 4096 bytes
log_buf_len total cpu_extra contributions:12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14104(86%)
PID hash table entries: 2048 (order: 1,8192 bytes)
Dentry cache hash table entries: 65536(order: 6, 262144 bytes)
Inode-cache hash table entries: 32768(order: 5, 131072 bytes)
Memory: 963296K/1048576K available (13037Kkernel code, 1643K rwdata, 4208K roda                                                                                       ta, 599K init, 2143K bss, 85280K reserved, 482268K highmem)
Virtual kernel memory layout:
   vector  : 0xffff0000 -0xffff1000   (   4 kB)
   fixmap  : 0xffc00000 -0xfff00000   (3072 kB)
   vmalloc : 0xdf800000 - 0xff000000  ( 504 MB)
   lowmem  : 0xc0000000 -0xdf400000   ( 500 MB)
   pkmap   : 0xbfe00000 -0xc0000000   (   2 MB)
   modules : 0xbf000000 - 0xbfe00000  (  14 MB)
     .text : 0xc0008000 - 0xc10df7c4  (17246 kB)
     .init : 0xc10e0000 - 0xc1175d80  ( 600 kB)
     .data : 0xc1176000 - 0xc1310fdc  (1644 kB)
       .bss : 0xc1310fdc - 0xc1528fcc   (2144 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0,CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:352
sched_clock: 32 bits at 24MHz, resolution41ns, wraps every 178956969942ns
Console: colour dummy device 80x30
Calibrating delay loop... 2383.87 BogoMIPS(lpj=1191936)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Mount-cache hash table entries: 1024(order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024(order: 0, 4096 bytes)
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
ftrace: allocating 43895 entries in 129pages
CPU0: thread -1, cpu 0, socket 0, mpidr80000000
Setting up static identity map for 0xbcb620- 0xbcb678
CPU: hi3798mv300h
CPU1: thread -1, cpu 1, socket 0, mpidr80000001
CPU2: thread -1, cpu 2, socket 0, mpidr80000002
CPU3: thread -1, cpu 3, socket 0, mpidr80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated(9572.35 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41architecture 3 part 40 variant 3 rev 4
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomiccoherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpointand 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8bytes.
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000(irq = 81, base_baud = 0) is a PL011 r                                                                                       ev2
console [ttyAMA0] enabled
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000(irq = 83, base_baud = 0) is a PL011 r                                                                                       ev2
f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000(irq = 84, base_baud = 0) is a PL011 r                                                                                       ev2
pl061_gpio gpio0: PL061 GPIO chip@0xf8b20000 registered
pl061_gpio gpio1: PL061 GPIO chip@0xf8b21000 registered
pl061_gpio gpio2: PL061 GPIO chip@0xf8b22000 registered
pl061_gpio gpio3: PL061 GPIO chip@0xf8b23000 registered
pl061_gpio gpio4: PL061 GPIO chip@0xf8b24000 registered
pl061_gpio gpio5: PL061 GPIO chip@0xf8004000 registered
pl061_gpio gpio6: PL061 GPIO chip@0xf8b26000 registered
pl061_gpio gpio7: PL061 GPIO chip@0xf8b27000 registered
pl061_gpio gpio8: PL061 GPIO chip@0xf8b28000 registered
pl061_gpio gpio9: PL061 GPIO chip@0xf8b29000 registered
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver,device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registersfrom 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump withrealtime priority
usbcore: registered new interface driverusbfs
usbcore: registered new interface driverhub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
hisi_iommu_ptable_addr:phy 0x1d800000    size:0x400000
hisi_iommu_err_rdaddr :phy 0x1ddc4200    size:0x200
hisi_iommu_err_wraddr :phy 0x1ddc4400     size:0x200
in hisi_iommu_domain_init start
in hisi_iommu_domain_init end
Advanced Linux Sound Architecture DriverInitialized.
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connectionmanager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource clk24M
NET: Registered protocol family 2
TCP established hash table entries: 4096(order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order:3, 32768 bytes)
TCP: Hash tables configured (established4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192bytes)
UDP-Lite hash table entries: 256 (order: 1,8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transportmodule.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchanneltransport module.
Trying to unpack rootfs image asinitramfs...
Freeing initrd memory: 464K (c4000000 -c4074000)
hw perfevents: enabled witharmv7_cortex_a17 PMU driver, 7 counters available
CPU PMU: attempt to register multiple PMUdevices!
arm-pmu: probe of arm-pmu failed with error-28
futex hash table entries: 1024 (order: 4,65536 bytes)
audit: initializing netlink subsys(disabled)
audit: type=2000 audit(0.316:1):initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) PhillipLougher
jffs2: version 2.2. (NAND) © 2001-2006 RedHat, Inc.
fuse init (API version 7.23)
msgmni has been set to 940
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driverversion 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
zram: Created 1 device(s) ...
hifmc100: registerd new interface driverhifmc100.
[MU]Resource: Device for DMA MappingLocated
[MU]Resource: io_base physical = 0xF9950000,Size 256
[MU]Resource: buffer physical  = 0xFE200000, Size 8566
hifmc100: Found flash memory controllerhifmc100.
hifmc100: no found nand device.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky<maxk@qualcomm.com>
FEPHY:addr=2, la_am=0xc, ldo_am=0x3,r_tuning=0x1c
libphy: himii: probed
hi_eth: attached port 0 PHY 2 to driverHiSilicon Festa s28v113
libphy: himii: probed
hi_eth: hieth_mdiobus_read,73:mdio busy
hi_eth: connect to port[0] PHY failed!
hi_eth: no dev probed!
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driverasix
usbcore: registered new interface driverax88179_178a
usbcore: registered new interface drivercdc_ether
usbcore: registered new interface driverdm9601
usbcore: registered new interface drivernet1080
usbcore: registered new interface drivercdc_subset
usbcore: registered new interface driverzaurus
usbcore: registered new interface drivercdc_ncm
ehci_hcd: USB 2.0 'Enhanced' HostController (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller(OHCI) Driver
usbcore: registered new interface drivercdc_wdm
usbcore: registered new interface driverusb-storage
usbcore: registered new interface driverusbserial
usbcore: registered new interface driveroption
usbserial: USB Serial support registeredfor GSM modem (1-port)
hiudc: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Dedicated Tx FIFOs mode
file system registered
mousedev: PS/2 mouse device common for allmice
i2c /dev entries driver
usbcore: registered new interface driveruvcvideo
USB Video Class driver (1.1.1)
sp805-wdt f8a2c000.watchdog: registrationsuccessful
device-mapper: ioctl: 4.28.0-ioctl(2014-09-17) initialised: dm-devel@redhat.com
f9820000.himciv200.SD: eMMC/MMC/SD DeviceNOT detected!
mmc0: BKOPS_EN bit is not set
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 HBD08G 7.28 GiB
mmcblk0boot0: mmc0:0001 HBD08G partition 14.00 MiB
mmcblk0boot1: mmc0:0001 HBD08G partition 24.00 MiB
mmcblk0rpmb: mmc0:0001 HBD08G partition 34.00 MiB
mmcblk0: p1(fastboot) p2(bootargs)p3(recovery) p4(deviceinfo) p5(baseparam) p6                                                                                       (pqparam) p7(logo) p8(logobak) p9(fastplay) p10(fastplaybak) p11(kernel)p12(mis                                                                                       c)p13(trustedcore) p14(backup) p15(system) p16(cache) p17(private)p18(securest                                                                                       ore) p19(userdata)
f9c40000.himciv200.SD: eMMC/MMC/SD DeviceNOT detected!
hidraw: raw HID events driver (C) JiriKosina
usbcore: registered new interface driverusbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
input: Hi keyboard as/devices/virtual/input/input0
input: Hi mouse as/devices/virtual/input/input1
input: qwerty as/devices/virtual/input/input2
Hi Android vinput driver init successful!
hiotg: registered new interface otg driver
Registering sdcardfs 2.1.3
vdd-gpu: 200 <--> 860 mV at 1060 mV
Mali: Mali device driver loaded
usbcore: registered new interface driversnd-usb-audio
oprofile: using timer interrupt.
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
   Performance counters on
   input device check on
   Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (15058 buckets,60232 max)
ctnetlink v0.93: registering withnfnetlink.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured(size=4096, memory=32Kbytes)
IPVS: Creating netns size=792 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter CoreTeam
ipt_CLUSTERIP: ClusterIP Version 0.8 loadedsuccessfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter CoreTeam
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tableshas been deprecated. Update you                                                                                       r scripts to load br_netfilter if you need this.
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation)ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11drivers
Registering SWP/SWPB emulation handler
hisi-sndcard hisi-sndcard: aiao-hifi<-> hisi-i2s mapping ok
ALSA device list:
  #0:HISI-AIAO
Freeing unused kernel memory: 596K(c10e0000 - c1175000)
init: /init.bigfish.rc: 55: invalid command'getprop'
init: /init.bigfish.rc: 114: invalid option'sdcard_r'
init: /init.bigfish.rc: 239: invalid option'//add'
init: /init.bigfish.rc: 425: invalid command'//insmod'
init (1): /proc/1/oom_adj is deprecated,please use /proc/1/oom_score_adj instea                                                                                       d.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p15): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs warning (device mmcblk0p19):ext4_clear_journal_err:4711: Filesystem err                                                                                       or recorded from previous mount: IO failure
EXT4-fs warning (device mmcblk0p19):ext4_clear_journal_err:4712: Marking fs in                                                                                        need of filesystem check.
EXT4-fs (mmcblk0p19): warning: mounting fswith errors, running e2fsck is recomm                                                                                       ended
EXT4-fs (mmcblk0p19): recovery complete
EXT4-fs (mmcblk0p19): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p16): recovery complete
EXT4-fs (mmcblk0p16): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p17): recovery complete
EXT4-fs (mmcblk0p17): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p18): VFS: Can't find ext4filesystem
init: /dev/hw_random not found
healthd: wakealarm_init: timerfd_createfailed
init: cannot find '/system/bin/rild',disabling 'ril-daemon'
init: cannot find'/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find'/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/frontPanel',disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt',disabling 'blueangel'
init: cannot find '/system/bin/dtvserver',disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver',disabling 'usb-driver'
init: cannot find'/system/bin/basicService', disabling 'basicService'
sdcardfs: version 2.1.3
sdcardfs: dev_name -> /data/media
sdcardfs: options ->fsuid=1023,fsgid=1023,mask=0,userid=0,gid=1015,reserved_mb=                                                                                       20
sdcardfs: mounted on top of /data/mediatype ext4
random: init urandom read with 77 bits ofentropy available
init: property 'sys.powerctl' doesn't existwhile expanding '${sys.powerctl}'
init: powerctl: cannot expand'${sys.powerctl}'
init: property'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${s                                                                                       ys.sysctl.extra_free_kbytes}'
init: cannot expand'${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sy                                                                                       s/vm/extra_free_kbytes'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
Login: healthd: BatteryPresentPath notfound
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
====write bit delay
======== Card detection to detect SDIOcard! ========
[rfkill]: sw_rfkill_init
rtk_btusb: RTKBT_RELEASE_NAME:20200318_TV_ANDROID_4.4(Beta)
rtk_btusb: Realtek Bluetooth USB drivermodule init, version 4.2.1
rtk_btusb: Register usb char deviceinterface for BT driver
usbcore: registered new interface driverrtk_btusb
BTMTK_init
proc initialized
major number:246
BT_majorfwlog number: 245
BT_chrdev driver(major 246) installed.
BT_chrdevfwlog driver(major 245) installed.
BTMTK_init: BT_major 246, BT_majorfwlog 245
IPv6: ADDRCONF(NETDEV_UP): eth0: link isnot ready
BTMTK_init: devID 257949696, devIDfwlog256901120
SDIO Driver Registration Success
init: property 'persist.sys.ch.live.start'doesn't exist while expanding '${pers                                                                                       ist.sys.ch.live.start}'
[14:39:52:433ERROR-HI_CIPHER]:HI_DRV_CIPHER_LoadHdcpKey[167]:Invalid head of B1                                                                                       ~B3!
[14:39:52:433ERROR-HI_HDMI]:DRV_HDMI_KeyLoad[4207]:Load hdcp key error!
card connected!
init: cannot expand'${persist.sys.ch.live.start}' while assigning to 'media.hp.                                                                                        hls.live.start'
Welcome to samepkg


Welcome to HiAndroid


chipname is Hi3798MV300H
himciv200 f9c40000.himciv200.SD: cardclaims to support voltages below defined r                                                                                        ange
ehci-platform: EHCI generic platform driver
random: nonblocking pool is initialized
ehci-platform f9890000.ehci: EHCI HostController
ehci-platform f9890000.ehci: new USB busregistered, assigned bus number 1
ehci-platform f9890000.ehci: irq 98, io mem0xf9890000
ehci-platform f9890000.ehci: USB 2.0started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: GenericPlatform OHCI controller
ohci-platform f9880000.ohci: new USB busregistered, assigned bus number 2
ohci-platform f9880000.ohci: irq 99, io mem0xf9880000
zram0: detected capacity change from 0 to104857600
scan edges:3 p2f:5 f2p:8
mix set temp-phase 2
scan elemnts: startp:64 endp:59
Tuning SampleClock. mix set phase:[03/07]ele:[05/08]
mmc2: new ultra high speed SDR104 SDIO cardat address 0001
Adding 102396k swap on/dev/block/zram0.  Priority:-1 extents:1across:102396k S                                                                                        S
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
tntfs: module license 'Commercial. Forsupport email ntfs-support@tuxera.com.' t                                                                                       aints kernel.
Disabling lock debugging due to kerneltaint
Tuxera NTFS driver 3017.7.4.6 [Flags: R/WMODULE].
Built against headers 3.18.24_hi3798mv310#1 SMP Fri Mar 16 11:11:20 CST 2018 ar                                                                                       m
Running on kernel 3.18.24_hi3798mv310 #1SMP Tue Aug 11 20:50:17 CST 2020 armv7l
init: sys_prop: permission denieduid:1000  name:ro.config.gfx2d_compose
usb 1-2: new high-speed USB device number 2using ehci-platform
usb-storage 1-2:1.0: USB Mass Storagedevice detected
scsi host0: usb-storage 1-2:1.0
TianlaiInitThread start
wifi detected: rtl8822cs
TianlaiInitThread end
scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI:2
sd 0:0:0:0: [sda] 3973120 512-byte logicalblocks: (2.03 GB/1.89 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode pagefound
sd 0:0:0:0: [sda] Assuming drive cache:write through
sda:sda1
sd 0:0:0:0: [sda] Attached SCSI removabledisk
lowmemorykiller: lowmem_shrink: convertoom_adj to oom_score_adj:
lowmemorykiller: oom_adj 0 =>oom_score_adj 0
lowmemorykiller: oom_adj 2 =>oom_score_adj 117
lowmemorykiller: oom_adj 4 =>oom_score_adj 235
lowmemorykiller: oom_adj 6 =>oom_score_adj 352
lowmemorykiller: oom_adj 9 =>oom_score_adj 529
lowmemorykiller: oom_adj 15 =>oom_score_adj 1000
IPv6: ADDRCONF(NETDEV_UP): eth0: link isnot ready
inputblock: disable block
FAT-fs (sda1): Volume was not properlyunmounted. Some data may be corrupt. Plea                                                                                        serun fsck.
EXT4-fs error (device mmcblk0p19):__ext4_new_inode:1016: comm id.softdetector:                                                                                        failed to insert inode 114591:doubly allocated?
Aborting journal on device mmcblk0p19-8.
EXT4-fs (mmcblk0p19): Remounting filesystemread-only
EXT4-fs error (device mmcblk0p19):ext4_journal_check_start:56: EXT4-fs error (d                                                                                        evicemmcblk0p19) in ext4_create:2247: IO failure
RESTORE_DEVICE=mmcblk0
EXT4 on Dev mmcblk0p19 error !! Enterwipe_data

Detected aborted journal
reboot: Restarting system
CPU will restart.
Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16

Reg Version:  v1.5.2`
Reg Time:     2018/10/10 16:14:27
Reg Name:     hi3798m3hdms1_hi3798mv300h_DDR3-1866_1GB_16bitx2_2layers_cm.re5

Set cpu freq

Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Compressed-boot v1.0.0
Uncompress...........................Ok


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (jenkins@ubuntu) (May 082019 - 12:07:56)

Fastboot:      Version 3.3.0
Build Date:    May 8 2019, 12:09:14
CPU:           Hi3798Mv300H
Boot Media:    eMMC
DDR Size:      1GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:2 p2f:5 f2p:7
mix set temp-phase 2
scan elemnts: startp:106 endp:102
Tuning SampleClock. mix set phase:[02/07]ele:[08/16]
MMC/SD Card:
   MID:         0xd6
   Read Block:  512 Bytes
   Write Block: 512 Bytes
   Chip Size:   7456M Bytes (HighCapacity)
   Name:        "HBD08G"
   Chip Type:   MMC
   Version:     5.1
   Speed:       100000000Hz
   Mode:        HS400
   Voltage:     1.8V
   Bus Width:   8bit
   Boot Addr:   0 Bytes
Net:  up

Boot Env on eMMC
   Env Offset:          0x00400000
   Env Size:            0x00010000
   Env Range:           0x00010000


SDK Version:HiSTBAndroidV600R003C01SPC031_patch4

check remote recovery button begin
selinux_flag is androidboot.selinux=
bootargs:console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(bootargs),12                                                                                       M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logobak),40M(                                                                                       fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),800M(backup),8                                                                                       00M(system),500M(cache),50M(private),8M(securestore),-(userdata)
==Enter recovery!
recoverybootargs:console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(boot                                                                                       args),12M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(logob                                                                                       ak),40M(fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),800M(b                                                                                       ackup),800M(system),500M(cache),50M(private),8M(securestore),-(userdata)
Automatic boot of image at addr 0x01000000...
Wrong Image Format for bootm command
ERROR: can't get kernel image!
recovery bootm failed!
enter recovery fail!!
mac:B4:60:77:10:F7:59
Reserve Memory
   Start Addr:          0x3FFFE000
   Bound Addr:          0x8D94000
   Free  Addr:          0x3F290000
   Alloc Block:  Addr         Size
                  0x3FBFD000   0x400000
                  0x3F8FC000   0x300000
                  0x3F8F9000   0x2000
                  0x3F878000   0x80000
                  0x3F876000   0x1000
                  0x3F775000   0x100000
                  0x3F622000  0x152000
                  0x3F29C000   0x385000
                  0x3F29A000   0x1000
                  0x3F290000   0x9000

Press Ctrl+C to stop autoboot

MMC read: dev # 0, block # 327680, count20480 ... 20480 blocks read: OK

152149822 Bytes/s

Found Initrd at 0x04000000 (Size 472726Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at01ffffc0 ...
  Image Name:  Linux-3.18.24_hi3798mv310
  Image Type:   ARM Linux KernelImage (uncompressed)
  Data Size:    8611132 Bytes = 8.2MiB
  Load Address: 02000000
  Entry Point:  02000000
  XIP Kernel Image ... OK
OK
ATAGS [0x00000100 - 0x000004A4], 932Bytes

Starting kernel ...

Uncompressing Linux... done, booting thekernel.
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.24_hi3798mv3x(jiangman@ubuntu) (gcc version 4.9.4 (gcc-linar                                                                                       o-4.9-2017.01 + glibc-2.27 Build by czyong Thu Mar 29 22:12:18 CST 2018)) #1 SM                                                                                       P Tue Aug 11 20:50:17 CST 2020
CPU: ARMv7 Processor [410fd034] revision 4(ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache,VIPT aliasing instruction cache
initmrd: found no initmrd.
Machine model: Hisilicon
cma: Reserved 44 MiB at 0x3c400000
cma: Reserved 4 MiB at 0x3fc00000
Memory policy: Data cache writealloc
PERCPU: Embedded 10 pages/cpu @debc2000s11648 r8192 d21120 u40960
Built 1 zonelists in Zone order, mobilitygrouping on.  Total pages: 261144
Kernel command line: console=ttyAMA0,115200blkdevparts=mmcblk0:4M(fastboot),4M(                                                                                       bootargs),12M(recovery),4M(deviceinfo),8M(baseparam),8M(pqparam),20M(logo),20M(l                                                                                       ogobak),40M(fastplay),40M(fastplaybak),40M(kernel),20M(misc),40M(trustedcore),80                                                                                        0M(backup),800M(system),500M(cache),50M(private),8M(securestore),-(userdata)ini                                                                                       trd=0x4000000,0x73696 mem=1G mmz=ddr,0,0,44M
log_buf_len individual max cpucontribution: 4096 bytes
log_buf_len total cpu_extra contributions:12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14104(86%)
PID hash table entries: 2048 (order: 1,8192 bytes)
Dentry cache hash table entries: 65536(order: 6, 262144 bytes)
Inode-cache hash table entries: 32768(order: 5, 131072 bytes)
Memory: 963296K/1048576K available (13037Kkernel code, 1643K rwdata, 4208K roda                                                                                        ta,599K init, 2143K bss, 85280K reserved, 482268K highmem)
Virtual kernel memory layout:
   vector  : 0xffff0000 -0xffff1000   (   4 kB)
   fixmap  : 0xffc00000 -0xfff00000   (3072 kB)
   vmalloc : 0xdf800000 - 0xff000000  ( 504 MB)
   lowmem  : 0xc0000000 -0xdf400000   ( 500 MB)
   pkmap   : 0xbfe00000 -0xc0000000   (   2 MB)
   modules : 0xbf000000 - 0xbfe00000  (  14 MB)
     .text : 0xc0008000 - 0xc10df7c4  (17246 kB)
     .init : 0xc10e0000 - 0xc1175d80  ( 600 kB)
     .data : 0xc1176000 - 0xc1310fdc  (1644 kB)
      .bss : 0xc1310fdc - 0xc1528fcc  (2144 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0,CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:352
sched_clock: 32 bits at 24MHz, resolution41ns, wraps every 178956969942ns
Console: colour dummy device 80x30
Calibrating delay loop... 2383.87 BogoMIPS(lpj=1191936)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Mount-cache hash table entries: 1024(order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024(order: 0, 4096 bytes)
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
ftrace: allocating 43895 entries in 129pages
CPU0: thread -1, cpu 0, socket 0, mpidr80000000
Setting up static identity map for 0xbcb620- 0xbcb678
CPU: hi3798mv300h
CPU1: thread -1, cpu 1, socket 0, mpidr80000001
CPU2: thread -1, cpu 2, socket 0, mpidr80000002
CPU3: thread -1, cpu 3, socket 0, mpidr80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated(9572.35 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41architecture 3 part 40 variant 3 rev 4
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomiccoherent allocations
hw-breakpoint: found 5 (+1 reserved)breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8bytes.
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000(irq = 81, base_baud = 0) is a PL011 r                                                                                       ev2
console [ttyAMA0] enabled
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000(irq = 83, base_baud = 0) is a PL011 r                                                                                       ev2
f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000(irq = 84, base_baud = 0) is a PL011 r                                                                                       ev2
pl061_gpio gpio0: PL061 GPIO chip@0xf8b20000 registered
pl061_gpio gpio1: PL061 GPIO chip@0xf8b21000 registered
pl061_gpio gpio2: PL061 GPIO chip@0xf8b22000 registered
pl061_gpio gpio3: PL061 GPIO chip@0xf8b23000 registered
pl061_gpio gpio4: PL061 GPIO chip@0xf8b24000 registered
pl061_gpio gpio5: PL061 GPIO chip@0xf8004000 registered
pl061_gpio gpio6: PL061 GPIO chip@0xf8b26000 registered
pl061_gpio gpio7: PL061 GPIO chip@0xf8b27000 registered
pl061_gpio gpio8: PL061 GPIO chip@0xf8b28000 registered
pl061_gpio gpio9: PL061 GPIO chip@0xf8b29000 registered
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver,device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registersfrom 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump withrealtime priority
usbcore: registered new interface driverusbfs
usbcore: registered new interface driverhub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
hisi_iommu_ptable_addr:phy 0x1d800000    size:0x400000
hisi_iommu_err_rdaddr :phy 0x1de0c200    size:0x200
hisi_iommu_err_wraddr :phy 0x1de0c400     size:0x200
in hisi_iommu_domain_init start
in hisi_iommu_domain_init end
Advanced Linux Sound Architecture DriverInitialized.
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connectionmanager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource clk24M
NET: Registered protocol family 2
TCP established hash table entries: 4096(order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order:3, 32768 bytes)
TCP: Hash tables configured (established4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192bytes)
UDP-Lite hash table entries: 256 (order: 1,8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transportmodule.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchanneltransport module.
Trying to unpack rootfs image asinitramfs...
Freeing initrd memory: 464K (c4000000 -c4074000)
hw perfevents: enabled witharmv7_cortex_a17 PMU driver, 7 counters available
CPU PMU: attempt to register multiple PMUdevices!
arm-pmu: probe of arm-pmu failed with error-28
futex hash table entries: 1024 (order: 4,65536 bytes)
audit: initializing netlink subsys(disabled)
audit: type=2000 audit(0.316:1):initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) PhillipLougher
jffs2: version 2.2. (NAND) © 2001-2006 RedHat, Inc.
fuse init (API version 7.23)
msgmni has been set to 940
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driverversion 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
zram: Created 1 device(s) ...
hifmc100: registerd new interface driverhifmc100.
[MU]Resource: Device for DMA MappingLocated
[MU]Resource: io_base physical =0xF9950000, Size 256
[MU]Resource: buffer physical  = 0xFE200000, Size 8566
hifmc100: Found flash memory controllerhifmc100.
hifmc100: no found nand device.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky<maxk@qualcomm.com>
FEPHY:addr=2, la_am=0xc, ldo_am=0x3,r_tuning=0x1c
libphy: himii: probed
hi_eth: attached port 0 PHY 2 to driverHiSilicon Festa s28v113
libphy: himii: probed
hi_eth: hieth_mdiobus_read,73:mdio busy
hi_eth: connect to port[0] PHY failed!
hi_eth: no dev probed!
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driverasix
usbcore: registered new interface driverax88179_178a
usbcore: registered new interface drivercdc_ether
usbcore: registered new interface driverdm9601
usbcore: registered new interface drivernet1080
usbcore: registered new interface drivercdc_subset
usbcore: registered new interface driverzaurus
usbcore: registered new interface drivercdc_ncm
ehci_hcd: USB 2.0 'Enhanced' HostController (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller(OHCI) Driver
usbcore: registered new interface drivercdc_wdm
usbcore: registered new interface driverusb-storage
usbcore: registered new interface driverusbserial
usbcore: registered new interface driveroption
usbserial: USB Serial support registeredfor GSM modem (1-port)
hiudc: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Dedicated Tx FIFOs mode
file system registered
mousedev: PS/2 mouse device common for allmice
i2c /dev entries driver
usbcore: registered new interface driveruvcvideo
USB Video Class driver (1.1.1)
sp805-wdt f8a2c000.watchdog: registrationsuccessful
device-mapper: ioctl: 4.28.0-ioctl(2014-09-17) initialised: dm-devel@redhat.com
f9820000.himciv200.SD: eMMC/MMC/SD DeviceNOT detected!
mmc0: BKOPS_EN bit is not set
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 HBD08G 7.28 GiB
mmcblk0boot0: mmc0:0001 HBD08G partition 14.00 MiB
mmcblk0boot1: mmc0:0001 HBD08G partition 24.00 MiB
mmcblk0rpmb: mmc0:0001 HBD08G partition 34.00 MiB
mmcblk0: p1(fastboot) p2(bootargs)p3(recovery) p4(deviceinfo) p5(baseparam) p6                                                                                       (pqparam) p7(logo) p8(logobak) p9(fastplay) p10(fastplaybak) p11(kernel)p12(mis                                                                                       c) p13(trustedcore) p14(backup) p15(system) p16(cache) p17(private)p18(securest                                                                                        ore)p19(userdata)
f9c40000.himciv200.SD: eMMC/MMC/SD DeviceNOT detected!
hidraw: raw HID events driver (C) JiriKosina
usbcore: registered new interface driverusbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
input: Hi keyboard as/devices/virtual/input/input0
input: Hi mouse as/devices/virtual/input/input1
input: qwerty as/devices/virtual/input/input2
Hi Android vinput driver init successful!
hiotg: registered new interface otg driver
Registering sdcardfs 2.1.3
vdd-gpu: 200 <--> 860 mV at 1060 mV
Mali: Mali device driver loaded
usbcore: registered new interface driversnd-usb-audio
oprofile: using timer interrupt.
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
   Performance counters on
   input device check on
   Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (15058 buckets,60232 max)
ctnetlink v0.93: registering withnfnetlink.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured(size=4096, memory=32Kbytes)
IPVS: Creating netns size=792 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter CoreTeam
ipt_CLUSTERIP: ClusterIP Version 0.8 loadedsuccessfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter CoreTeam
NET: Registered protocol family 17
bridge: automatic filtering viaarp/ip/ip6tables has been deprecated. Update you                                                                                       r scripts to load br_netfilter if you need this.
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation)ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11drivers
Registering SWP/SWPB emulation handler
hisi-sndcard hisi-sndcard: aiao-hifi<-> hisi-i2s mapping ok
ALSA device list:
  #0:HISI-AIAO
Freeing unused kernel memory: 596K(c10e0000 - c1175000)
init: /init.bigfish.rc: 55: invalid command'getprop'
init: /init.bigfish.rc: 114: invalid option'sdcard_r'
init: /init.bigfish.rc: 239: invalid option'//add'
init: /init.bigfish.rc: 425: invalidcommand '//insmod'
init (1): /proc/1/oom_adj is deprecated,please use /proc/1/oom_score_adj instea                                                                                        d.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p15): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs warning (device mmcblk0p19):ext4_clear_journal_err:4711: Filesystem err                                                                                       or recorded from previous mount: IO failure
EXT4-fs warning (device mmcblk0p19):ext4_clear_journal_err:4712: Marking fs in                                                                                         needof filesystem check.
EXT4-fs (mmcblk0p19): warning: mounting fswith errors, running e2fsck is recomm                                                                                       ended
EXT4-fs (mmcblk0p19): recovery complete
EXT4-fs (mmcblk0p19): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p16): recovery complete
EXT4-fs (mmcblk0p16): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p17): recovery complete
EXT4-fs (mmcblk0p17): mounted filesystemwith ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p18): VFS: Can't find ext4filesystem
init: /dev/hw_random not found
healthd: wakealarm_init: timerfd_createfailed
init: cannot find '/system/bin/rild',disabling 'ril-daemon'
init: cannot find'/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find'/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/frontPanel',disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt',disabling 'blueangel'
init: cannot find '/system/bin/dtvserver',disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver',disabling 'usb-driver'
init: cannot find'/system/bin/basicService', disabling 'basicService'
sdcardfs: version 2.1.3
sdcardfs: dev_name -> /data/media
sdcardfs: options ->fsuid=1023,fsgid=1023,mask=0,userid=0,gid=1015,reserved_mb=                                                                                       20
sdcardfs: mounted on top of /data/mediatype ext4
random: init urandom read with 81 bits ofentropy available
init: property 'sys.powerctl' doesn't existwhile expanding '${sys.powerctl}'
init: powerctl: cannot expand'${sys.powerctl}'
init: property'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${s                                                                                       ys.sysctl.extra_free_kbytes}'
init: cannot expand'${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sy                                                                                        s/vm/extra_free_kbytes'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
Login: healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
====write bit delay
======== Card detection to detect SDIOcard! ========
[rfkill]: sw_rfkill_init
rtk_btusb: RTKBT_RELEASE_NAME:20200318_TV_ANDROID_4.4(Beta)
rtk_btusb: Realtek Bluetooth USB drivermodule init, version 4.2.1
rtk_btusb: Register usb char deviceinterface for BT driver
usbcore: registered new interface driverrtk_btusb
IPv6: ADDRCONF(NETDEV_UP): eth0: link isnot ready
BTMTK_init
proc initialized
major number:246
BT_majorfwlog number: 245
BT_chrdev driver(major 246) installed.
BT_chrdevfwlog driver(major 245) installed.
BTMTK_init: BT_major 246, BT_majorfwlog 245
BTMTK_init: devID 257949696, devIDfwlog256901120
SDIO Driver Registration Success
init: property 'persist.sys.ch.live.start'doesn't exist while expanding '${pers                                                                                       ist.sys.ch.live.start}'
init: cannot expand'${persist.sys.ch.live.start}' while assigning to 'media.hp.                                                                                       hls.live.start'
[14:39:52:403ERROR-HI_CIPHER]:HI_DRV_CIPHER_LoadHdcpKey[167]:Invalid head of B1                                                                                        ~B3!
[14:39:52:403ERROR-HI_HDMI]:DRV_HDMI_KeyLoad[4207]:Load hdcp key error!
Welcome to samepkg
chipname is Hi3798MV300H
card connected!
himciv200 f9c40000.himciv200.SD: cardclaims to support voltages below defined r                                                                                       ange


Welcome to HiAndroid


ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI HostController
ehci-platform f9890000.ehci: new USB busregistered, assigned bus number 1
ehci-platform f9890000.ehci: irq 98, io mem0xf9890000
ehci-platform f9890000.ehci: USB 2.0started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: GenericPlatform OHCI controller
ohci-platform f9880000.ohci: new USB busregistered, assigned bus number 2
ohci-platform f9880000.ohci: irq 99, io mem0xf9880000
random: nonblocking pool is initialized
scan edges:3 p2f:5 f2p:8
mix set temp-phase 2
scan elemnts: startp:64 endp:58
Tuning SampleClock. mix set phase:[03/07]ele:[05/08]
mmc2: new ultra high speed SDR104 SDIO cardat address 0001
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
tntfs: module license 'Commercial. Forsupport email ntfs-support@tuxera.com.' t                                                                                       aints kernel.
zram0: detected capacity change from 0 to104857600
Disabling lock debugging due to kerneltaint
Adding 102396k swap on/dev/block/zram0.  Priority:-1 extents:1across:102396k S                                                                                       S
Tuxera NTFS driver 3017.7.4.6 [Flags: R/WMODULE].
Built against headers 3.18.24_hi3798mv310#1 SMP Fri Mar 16 11:11:20 CST 2018 ar                                                                                       m
Running on kernel 3.18.24_hi3798mv310 #1SMP Tue Aug 11 20:50:17 CST 2020 armv7l
init: sys_prop: permission denieduid:1000  name:ro.config.gfx2d_compose
usb 1-2: new high-speed USB device number 2using ehci-platform
usb-storage 1-2:1.0: USB Mass Storagedevice detected
scsi host0: usb-storage 1-2:1.0
TianlaiInitThread start
wifi detected: rtl8822cs
TianlaiInitThread end
scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI:2
sd 0:0:0:0: [sda] 3973120 512-byte logicalblocks: (2.03 GB/1.89 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode pagefound
sd 0:0:0:0: [sda] Assuming drive cache:write through
sda:sda1
sd 0:0:0:0: [sda] Attached SCSI removabledisk
EXT4-fs error (device mmcblk0p19):ext4_free_inode:346: comm xiriservice: bit al                                                                                       ready clearedfor inode 114591
Aborting journal on device mmcblk0p19-8.
EXT4-fs (mmcblk0p19): Remounting filesystemread-only
EXT4-fs error (device mmcblk0p19):ext4_journal_check_start:56: Detected aborted                                                                                         journal
EXT4-fs (mmcblk0p19): Remounting filesystemread-only
RESTORE_DEVICE=mmcblk0
EXT4 on Dev mmcblk0p19 error !! Enterwipe_data
EXT4-fs error (device mmcblk0p19) inext4_evict_inode:310: IO failure
RESTORE_DEVICE=mmcblk0
EXT4 on Dev mmcblk0p19 error !! Enterwipe_data
reboot: Restarting system
CPU will restart.
Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16

Reg Version:  v1.5.2`
Reg Time:     2018/10/10 16:14:27
Reg Name:    hi3798m3hdms1_hi3798mv300h_DDR3-1866_1GB_16bitx2_2layers_cm.re5

Set cpu freq

Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Compressed-boot v1.0.0
Uncompress...........................Ok


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (jenkins@ubuntu) (May 082019 - 12:07:56)

Fastboot:      Version 3.3.0
Build Date:   May  8 2019, 12:09:14
CPU:           Hi3798Mv300H
Boot Media:    eMMC
DDR Size:      1GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:2 p2f:5 f2p:7
mix set temp-phase 2
scan elemnts: startp:106 endp:102
Tuning SampleClock. mix set phase:[02/07]ele:[08/16]
MMC/SD Card:
   MID:         0xd6
   Read Block:  512 Bytes
   Write Block: 512 Bytes
   Chip Size:   7456M Bytes (HighCapacity)
   Name:        "HBD08G"
   Chip Type:   MMC
   Version:     5.1
   Speed:       100000000Hz
   Mode:        HS400
   Voltage:     1.8V
   Bus Width:   8bit
   Boot Addr:   0 Bytes
Net:  up

Boot Env on eMMC
   Env Offset:          0x00400000
   Env Size:            0x00010000
   Env Range:           0x00010000


SDK Version:HiSTBAndroidV600R003C01SPC031_patch4

check remote recovery button begin

CM201-2-CH刷机不成功。

CM201-2-CH刷机不成功。

0f75745843c1982230e5f3c264af2b17.mp4 (2.1 MB, 下载次数: 35)

上一篇:广州移动新魔百和M301H(ZN)短节点的求助
下一篇:CM201-2ch mv300的免拆固件可以通过短接刷机不?
头像被屏蔽
沙发
发表于 2021-2-27 11:39 | 只看该作者
提示: 作者被禁止或删除 内容自动屏蔽
回复 支持 反对

使用道具 举报

板凳
发表于 2021-3-12 10:00 来自ZNDS手机版 | 只看该作者
这个是201-2长虹代工带套装的 eMMC固件
8822CS无线模块
回复 支持 反对

使用道具 举报

地板
发表于 2024-2-1 23:40 | 只看该作者
别搞这么长,谁看啊
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|新帖|标签|软件|Sitemap|ZNDS智能电视网 ( 苏ICP备2023012627号 )

网络信息服务信用承诺书 | 增值电信业务经营许可证:苏B2-20221768 丨 苏公网安备 32011402011373号

GMT+8, 2024-4-27 06:26 , Processed in 0.132027 second(s), 14 queries , Redis On.

Powered by Discuz!

监督举报:report#znds.com (请将#替换为@)

© 2007-2024 ZNDS.Com

快速回复 返回顶部 返回列表