外贸盒子HK1BOX X4刷coreelec双系统问题

查看数: 25122 | 评论数: 7 | 收藏 2

关灯 | 提示：支持键盘翻页<-左右->

帖子模式

nullprt

发布时间: 2022-9-14 20:28

正文摘要:

本帖最后由智能小柠檬于 2022-9-14 20:35 编辑插U盘能用，但我想写入emmc 然后就出现了图上的错误，有没有大佬帮忙看下

yanlf| 来自浙江 发表于 2022-9-17 08:30

本帖最后由 yanlf 于 2022-9-17 08:52 编辑

试试 20 alpha3
Fixed ceemmc error: Error opening file for reading '/dev/reserved'

zhenningzhao| 来自山西 发表于 2022-9-17 00:25

我也尝试的刷了一下，用的京东的tf卡64g，刷好之后，盒子无法从tf卡启动，电视屏幕左上角一推英文提示无法挂载什么的。这个怎么处理啊，哪里没有弄对？

kuangru52| 来自河南 发表于 2022-9-16 07:12

X4只能挂U盘或者tf卡上

nullprt| 来自江苏 发表于 2022-9-15 09:27

昨天最后在论坛上找到原因了

ceemmc won’t work on the > Android 11 firmware found on these s905x4 boxes for now, on which the system(super) and storage (userdata) partitions are newer ext4 fs either created from underlying device-mapper or stored directly on these partitions yet not readable for the 4.9 kernel CE is currectly using.

Also, to keep the new partitoon table from being reverted back, ceemmc has to remove the partitions node from dtb so the u-boot won’t “helpfully fix” the partition table, which is also not doable for these S905X4 boxes which must read the partition node in dtb instead of the partitoon table to get the location for several partitions, so removing the node will brick the box…

You could find some other ways to install to internal for these boxes not supported by anyone especially teamCE, but I don’t recommend even trying to install to emmc on S005X4 boxes for now.

总之就是现在是不能写入emmc了

avin4| 来自重庆 发表于 2022-9-15 09:12