乐视超4系列原生Android TV分享

查看数: 350482 | 评论数: 63 | 收藏 6

关灯 | 提示：支持键盘翻页<-左右->

帖子模式

尛髻髻

发布时间: 2018-1-27 23:20

正文摘要:

目前我有美国国内香港印度等等地区固件。爽歪歪，不过不打算外发。主要是有人太高调了！！！包括最新EUI 6.5 ROOT固件我都有，但是你们太高调了，SO 不发了，不然大家都没得玩。 &nbs ...

杰罗| 来自广东 发表于 2018-11-12 22:49

煞笔楼主，咩史啦

xhanglizhu| 来自湖北 发表于 2018-8-6 15:12

ishine 发表于 2018-3-12 10:38
美版

高手在当贝啊！学习了
S50 Air 可以刷吗？

112白云| 来自贵州 发表于 2018-1-28 21:49

不发出来，那你发帖什么意思，炫耀？？

Fixme404| 来自上海 发表于 2022-3-24 09:57

楼主，有适合乐视超4 X55m的美版刷机包吗？andriod tv版本的我急求固件，有的话麻烦给我下吧，谢谢！好人一生平安！

foobin| 来自河南 发表于 2020-5-9 17:03

老虎爱潜水发表于 2018-2-28 13:40
我已经找到了 xda有先刷俄版固件然后在里面直接升级就变成原生安卓tv了

只看到了美版和印度版官方固件，bin和zip文件加一起将近3个g，有点大。

foobin| 来自河南 发表于 2020-5-9 16:46

xhanglizhu 发表于 2018-8-6 15:12
高手在当贝啊！学习了
S50 Air 可以刷吗？

只适配超4电视，有官方美国和印度两种固件。

foobin| 来自河南 发表于 2020-5-9 16:33

Warning: only for x4, not for x3. You may end up with a bricked x3

foobin| 来自河南 发表于 2020-5-9 16:25

固件：Official USA Firmware:
USA BIN Firmware 5.8.050S_1028:
//mega.nz/#F!7PhyDI6D!TnwNlMmWXosK1uCUdpyNGg[/url]

USA ZIP Firmware 5.8.056S_0420 (OTA ZIP, must be flashed only after flashing the above bin):
//drive.google.com/open?id=1N9...rNHVB_-VPIadnw[/url]
Official INDIA Firmware:
INDIA BIN Firmware 5.8.049S_0906:
//mega.nz/#F!CaAQFCjI!5l6HqL2H756890q3FKy7Pw[/url]
INDIA ZIP Firmware 5.9.057S_0604(OTA ZIP, must be flashed only after flashing the above bin):
//mega.nz/#F!WXYBRJYQ!LcFLkVNZD0o4Fi2eacX3iQ[/url]

下载地址：Official USA Firmware（zip）：//drive.google.com/file/d/1N96FWEseGxOToqwks3rNHVB_-VPIadnw/view[/url]

zip包安装说明：Flash ZIP firmware:
1. Since mostly this is not a full firmware, It is recommended to have a full BIN firmware flashed for the region you are flashing the ZIP firmware for.
2. Turn off the TV
3. Rename the file as Update.Zip and put it in the root of the flash drive (fat32). Insert the USB flash drive into the TV (Normally into the top slot, if it does not work in the other)
4. Point the remote tothe TV and press Buttons in exact Sequence: SETTINGS, VOL +, VOL-, CH +, CH-, POWER. Press slowly, hold each button for 1-2 sec.
5. The TV would turn on and the firmware flashing would start.
6. Alternately (Instead of steps 4-5), you may also use the offline update option from the System Update app already there in TV.
7. Make sure the power is not turned off during flashing process as this may brick your TV.

jason0916| 来自湖北 发表于 2020-5-4 17:35