这九洲PTV8098是什么芯片
有谁知道这九洲PTV8098（电信版）是什么芯片。AC_ON
MIU0_DQS-OK
BIST0-
MIU0-1024_U
Relocation Offset is: 011d7000
U-Boot 2011.06 (Aug 15 2018 - 11:57:10)
miu opencreate instance at 559e9418 with private size 80 bytes at 559e9460
create instance at 559e94b8 with private size 52 bytes at 559e9500
uboot held at ,size=013220a0
CPU: Clippers
Board: BD_MST207C_D01A_S_CLIPPERS
DRAM:875 MiB
Now running in RAM - U-Boot at: 55c00000
eMMC: HS200 200MHz
eMMC 7.28 GB
In: serial
Out: serial
Err: serial
Net: No ethernet found.
MAC:0xc: 0x49: 0x33: 0x58:0x2: 0x10
msIR_Initialize
cpu opencreate instance at 559f99c0 with private size 44 bytes at 559f9a08
CPUIoctl - MDrv_CMD_CPU_QueryClock
close moduleNames: MODULE_CPU
_Serial_Mac_Burn 1151
$$U
getenv macaddr
EMAC Mem Base:96834000
Rx buff:36834000
RBQP:36864000
Packet buffer:56a31b90
phy =78c9
MAC Address 0C:49:33:58:02:10
Auto-Negotiation...
Link Status Speed:100 Full-duplex:1
word_ETH_CFG 803(Re)start EMAC...
Changelist: 24543697
============= set bootargs ===============
Hit any key to stop autoboot:0
AC on
ovt_set_ethaddr command: mmc read.p 0x30000000 properties 0x400000
ovt_set_ethaddr properties name:mac value:0C:49:33:58:02:10
ovt_set_ethaddr command: mmc write.p 0x30000000 properties 0x400000 1
8192 blocks written: OK
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
ovt_set_ethaddr command: mmc read.p 0x30000000 properties 0x400000
ovt_set_ethaddr properties name:stb_id value:001004990108968017090C4933580210
ovt_set_ethaddr command: mmc write.p 0x30000000 properties 0x400000 1
8192 blocks written: OK
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
fore uup IRKey
chip is NC:1
MsBoot getenv customer_board_id 5!!!
create instance at 559f9d70 with private size 256 bytes at 559f9db8
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
PNL:
pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
PNL:CalculateLPLLSETbyDClk u32KHz = 742500000, u64DefaultLdHz = 742500000
PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df
No instance existed, please get an instance by calling MApi_XC_Init() first
msHdmitx_Disp_Init
create instance at 559f9ec0 with private size 1720 bytes at 559f9f08
no need to patchcreate instance at 559fab08 with private size 80 bytes at 559fab50
Rx Support HDMI mode!
msdbg REG_PKT_AVI_1_09=5850, 0x2008=c2, bIs420=0
msdbg bIsMSO9280NC = 1, bIsHDMI20=0, b222MHz=0, idx=5, cd_val=0
shift -8 pixels in PAL mode
Create Dolby single part name task failed!! ERROR!!! HVSD H input = 0, HVSD H output = 720
ERROR!!! HVSD V input = 0, HVSD V output = 576
bEnable = 0, bIsDNR2VE = 0
create instance at 559faba8 with private size 304 bytes at 559fabf0
close moduleNames: MODULE_NJPEG_EX
reproduceRate:168430090
create instance at 559faba8 with private size 132280 bytes at 559fabf0
gop opencreate instance at 55a1b0b0 with private size 6912 bytes at 55a1b0f8
create instance at 55a1cc00 with private size 1720 bytes at 55a1cc48
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x0), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37bb0000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x1), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37930000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x2), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37130000)
[
晨星
页:
[1]
