dcx6210124 发表于 2018-1-28 16:03

广东电信华为悦盒子EC6108V9U_pub　TTL跑马后输入不了命令！

广东电信华为悦盒子EC6108V9U_pub　TTL跑马后输入不了命令！请问大神们怎么解决？谢谢！！附提示如下：
Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:         0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked


SDK Version: HiSTBAndroidV600R001C00SPC065_v2016113014

HI_Flash_Read Ret= 2048
HI_Flash_Read Ret= 2048
HMT_read_bootlogo_count, bootlogo_count=0
HMT_write_bootlogo_count, bootlogo_count=1
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800
start detecting key1...
get key1 value0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 8912896
HI_Flash_Read Ret= 8912896

   XIP Kernel Image ... OK
OK
   kernel loaded at 0x02000000, end = 0x02782a10
initrd rd_start = 4e00000,rd_end = 4e502ae
HMT_write_bootlogo_count, bootlogo_count=0
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
libphy: PHY himii:1f not found
init: /init.bigfish.rc: 115: invalid option 'sdcard_r'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: read misc boot info 1088/1088 bytes.
init: mount system image fail 0 times.
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p16
init: init: result is 256
init: /dev/hw_random not found
init:
stb-1 8V9 typeinit: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/basicService', disabling 'basicService'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'

aoanor 发表于 2018-1-28 20:23


看提示是类似找不到文件和写入失败。确认下文件是否齐全

高乐高_UR9E5 发表于 2018-10-23 17:19

楼主后面找到办法了吗？我现在也是这情况！

dcx6210124 发表于 2018-10-23 17:20

高乐高_UR9E5 发表于 2018-10-23 17:19
楼主后面找到办法了吗？我现在也是这情况！

adb锁了，只能直接刷机！

大舌妹 发表于 2018-12-18 21:32

MGV2000还不跑马

鲁西南卫星 发表于 2018-12-28 12:09

只能用线刷包，直接刷。
定制盒子很难找到线刷包。

liuhuan22 发表于 2019-2-16 17:40

HI_OTP_LockIdWord,327: ID_WORD have already been locked




have already been locked

vtdxsfy 发表于 2019-12-6 09:36

如何接TTL跑马

lionking77 发表于 2020-2-21 17:51

楼主怎么解决了是否已经解决呢如果解决了麻烦给下方法谢谢   
页: [1]
查看完整版本: 广东电信华为悦盒子EC6108V9U_pub　TTL跑马后输入不了命令！