860A1.1 系统升级后 TTL 进不去了
AC_ONMIU0_DQS-OK
BIST0-▒▒▒
MIU0-1024_U
Start uboot
Relocation Offset is: 015d7000
U-Boot 2011.06-00114-ga7f97e5-dirty (Oct 23 2017 - 23:15:16)
miu opencreate instance at 51be9418 with private size 80 bytes at 51b e9460
create instance at 51be94b8 with private size 52 bytes at 51be9500
uboot held at ,size=013220a0
CPU: Clippers
Board: BD_MST207C_D01A_S_CLIPPERS
DRAM:813 MiB
Now running in RAM - U-Boot at: 51e00000
eMMC: HS200 200MHz
eMMC 3.68 GB
In: serial
Out: serial
Err: serial
Net: zte_shutdow =false
No ethernet found.
Set MAC default
MAC:0x0: 0x30: 0x1b: 0xba:0x2: 0xdb
msIR_Initialize
cpu opencreate instance at 51bf99c0 with private size 44 bytes at 51b f9a08
CPUIoctl - MDrv_CMD_CPU_QueryClock
close moduleNames: MODULE_CPU
### main_loop entered: s is true
### main_loop entered: bootdelay=1
Starting logo
============= set bootargs ===============
COMControlFlag=> value=, val=0
zte_mac=90:D8:F3:E3:2A:3E,ethaddr=90:D8:F3:E3:2A:3E
Hit any key to stop autoboot: 1@
step1 error...
abort=0 0
do_bootcheck called
MMC_CAPACITY_512 =7733240
current emmc size is =0x75fff8 (should by 512)
MMCusrdata_size =3901440
current userdata size =0x3b8800 (should by 512)
get_boot1_ver cmd_boot1=mmc read.boot 1 0x25000000 0x0 0x200000
set hdmi hdcp mode 0!
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
iTVStandard2Resolution = 2
value = 5510049900703340000090D8F3E32A3E
COMControlFlag=> value=, val=0
ethaddr =90:D8:F3:E3:2A:3E
jy ....
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
BootMode=0
PATCH FOR zte BEGIN
Watchdog_enable TRUE
Watchdog start, MAXTIME 120
create instance at 51bf9bb0 with private size 256 bytes at 51bf9bf8
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
PNL:
pstPanelInitData->u16Width=1280, pstPanelInitData->u16 Height=720
u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTot al=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
pstPanelInitData->u16Width=1280, pstPanelInitDa ta->u16Height=720
u16HTotal=1980,u16VTotal=750,pstPanelInitData-> u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
PNL:CalculateLPLLSETbyDClk u32KHz = 742500000, u64DefaultLdHz = 742500000
PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df
No instance existed, please get an instance by call ing MApi_XC_Init() first
msHdmitx_Disp_Init
create instance at 51bf9d00 with private size 1720 bytes at 51bf9d48
no need to patchcreate instance at 51bfa948 with private size 80 bytes at 51bfa 990
Rx Support HDMI mode!
HDMI CONNECT! isBootToRecovery = 0
shift -8 pixels in PAL mode
Create Dolby single part name task failed!! ERROR!!! HV SD H input = 0, HVSD H output = 720
ERROR!!! HVSD V input = 0, HVSD V output = 576
bEnable = 0, bIsDNR2VE = 0
lyndon Hal_VE_Set_PreVSD 1mmc change mount : tvcustomer
Size of file "/720.jpg" from mmc device 0 partition tvcustomer: 152910 bytes
Loading file "/720.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
152910 bytes read
create instance at 51bfa9e8 with private size 304 bytes at 51bfaa30
close moduleNames: MODULE_NJPEG_EX
create instance at 51bfa9e8 with private size 132280 bytes at 51bfaa30
gop opencreate instance at 51c1aef0 with private size 6908 bytes at 5 1c1af38
## Booting kernel from Legacy Image at 25000800 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 5317432 Bytes = 5.1 MiB
Load Address: 20208000
Entry Point:20208000
Contents:
Image 0: 4627208 Bytes = 4.4 MiB
Image 1: 690212 Bytes = 674 KiB
## Loading init Ramdisk from multi component Legacy Image at 25000800 ...
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
Starting kernel ...
, not expected dram size: 0x0
#######################################################################
# , miu kernel protect is not enabled on second dram #
#######################################################################
Uncompressing Linux... done, booting the kernel.
KERN-3.10.23.001049551
tommy: thread_info_cache_init
mtdoops: mtd device (mtddev=name/number) must be supplied
ready init mute
after init mute
RBQP_BASE = 50304000
init: /init.clippers.rc: 455: ignored duplicate definition of service 'mdnsd'
init: /zte_init.rc: 38: ignored duplicate definition of service 'xiriservice'
init: ## ProductID: strlen (32)!
healthd: No charger supplies found
init: cannot find '/system/bin/xiriservice_ChinaMobile_SiChuan', disabling 'b toothd'
init: cannot find '/system/bin/bleservice', disabling 'bleservice'
电脑系统是win1064位 用的是CH340和putty
看不懂哇这么多 是的，封了 我也是这样 进不去输入不了指令 我也是这样 进不去输入不了指令 我和你一样的问题，我的是XP的。唉。。。。 zxslt 发表于 2018-1-8 00:07
是的，封了
讲详细点，这盒子还有希望破吗？ 我的现象和你一样，你解决了吗 antcipate 发表于 2018-1-13 22:58
我的现象和你一样，你解决了吗
淘宝花钱弄好了 yxypliu 发表于 2018-9-19 19:07
淘宝花钱弄好了
是怎么弄的？能把过程分享一下吗？
页:
[1]
2