tcl39寸液晶电视有背光，不能U盘刷机。下面是串口读取数.....
UART_115200BIST0-OK
-5566
U
U-Boot 2011.06 (Jan 21 2014 - 14:30:16)
DRAM:128 MiB
Hello U-Boot
Stack Pointer at: 87e44f40
uboot held at
Now running in RAM - U-Boot at: 871f0180
NAND:DMA MODE
SDR NAND is detected
CIS is found @Blk0
FCIE is set to 60MHz
128 MiB
*** Warning - set default for mtdparts, using default environment
Creating 1 MTD partitions on "nand0":
0x000000640000-0x000000840000 : "mtd=2"
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=2"
UBI: MTD device size: 2 MiB
UBI: number of good PEBs: 16
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 250
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 1
UBI: total number of reserved PEBs: 15
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 1903/1370
NAND read: device 0 offset 0x180000, size 0x98
152 bytes read: OK
Volume "MPOOL" found at volume id 0
UART BUS OFF!!
求各位大侠给小弟指点一二
是什么芯片的需要找对应的线刷方法刷机看看了 hao501802766 发表于 2017-7-26 09:59
是什么芯片的需要找对应的线刷方法刷机看看了
ID=20 L39F1600E F1600E MS881 AUO_T390XVN01 EL391C7
u盘不是刷机，线刷方法找了好久。找不到这方面的资料
页:
[1]
