sunyw 发表于 2017-4-24 11:42

盒子烧写fastboot成功，但无法打开显示如下代码，也无法擦...

System startup

Reg Version:v1.1.0
Reg Time:   2014/11/79:40:54
Reg Name:   hi3798mdmo1b_hi3798mv100_ddr3_1gbyte_16bitx2_2layers_emmc.reg

Fastboot 3.3.0-svn13200 (huangcm@ubuntu) (Nov 03 2015 - 14:57:04)

Fastboot:      Version 3.3.0
Build Date:    Nov3 2015, 14:57:23
CPU:         Hi3798Mv100
Boot Media:    SD
DDR Size:      1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x70 0x70 0x70 0x70 0x70 0x70 0x70 0x70
No NAND device found!!!

MMC/SD controller initialization.
MMC/SD Card:
    MID:         0x88
    Read Block:512 Bytes
    Write Block: 512 Bytes
    Chip Size:   7393M Bytes (High Capacity)
    Name:      "NCard"
    Chip Type:   SD
    Version:   2.0
    Speed:       25000000Hz
    Bus Width:   4bit
    Boot Addr:   0 Bytes

*** Warning - bad CRC or SD, using default environment


Boot Env on SD
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:         0x00010000


SDK Version: HiSTBAndroidV600R001C00SPC053_v2014121715

HI_Flash_Open partion deviceinfo error
HI_Flash_Open partion misc error
press the key!!
页: [1]
查看完整版本: 盒子烧写fastboot成功，但无法打开显示如下代码，也无法擦...