感谢分享，ZNDS有你更精彩:)
楼主你倒是出个菜鸟教程啊，我等了两天了
糖冬瓜 发表于 2017-2-13 19:27
楼主你倒是出个菜鸟教程啊，我等了两天了
不可控因素太多，给你个思路好了，盒子必须root 然后用adb工具连接，登陆root帐号，然后在输入那几条命令
GhostMan 发表于 2017-2-14 20:21
不可控因素太多，给你个思路好了，盒子必须root 然后用adb工具连接，登陆root帐号，然后在输入那几条命令 ...
C:\WINDOWS\system32>cd C:\Windows\System32|adb
Android Debug Bridge version 1.0.31
-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]]- disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>]- copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the following format:
<serial> " " <local> " " <remote> "\n"
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default
is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up.If
the -all or -shared flags are passed, then the package
list is optional.Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
- Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
C:\WINDOWS\system32>adb connect 192.168.0.233
connected to 192.168.0.233:5555
C:\WINDOWS\system32>adb shell
shell@phoenix:/ $ su
su
swdevmsg set 0 product_type DB1016
[-] Unallowed user
shell@phoenix:/ $ swdevmsg set 0 product_type DB1016
not root user,can't use this function
255|shell@phoenix:/ $
C:\WINDOWS\system32>
C:\WINDOWS\system32>adb connect 192.168.0.233
connected to 192.168.0.233:5555
C:\WINDOWS\system32>adb shell
shell@phoenix:/ $ su
su
root@phoenix:/ #swdevmsg set 0 product_type DB1016
swdevmsg set 0 product_type DB1016
root@phoenix:/ # swdevmsg set 0 product_type DB1016
swdevmsg set 0 product_type DB1016
root@phoenix:/ # -c /system/bin/swdevmsg set 0 product_type DB1016
-c /system/bin/swdevmsg set 0 product_type DB1016
这是我按照另一个教程做的，不知道是不是成功了，不过我重置过盒子，型号显示是db1016，但是呢现在问题是自带的视频完全看不了就像屏蔽了IP一样，连WIFI测试说连不到大麦服务器，但是其他软件能上网不知道什么原因，是不是破解了就不能看原来的视频了？
糖冬瓜 发表于 2017-2-14 20:34
C:\WINDOWS\system32>cd C:\Windows\System32|adb
Android Debug Bridge version 1.0.31
破解以后所有功能都正常使用，你是不是路由器屏幕大麦ip了
GhostMan 发表于 2017-2-15 13:42
破解以后所有功能都正常使用，你是不是路由器屏幕大麦ip了
没有屏蔽ip就是不知道为什么不会更新桌面上的图标什么的
大神，你好！修改db1016后还需要修改什么吗？才能实现全网通。
糖冬瓜 发表于 2017-2-15 18:04
没有屏蔽ip就是不知道为什么不会更新桌面上的图标什么的
我也不清楚了。
likeit100 发表于 2017-2-15 23:31
大神，你好！修改db1016后还需要修改什么吗？才能实现全网通。
我不是大神~~我也是跟着来论坛大神学的，我改了型号以后升级了，升级到最新的了
GhostMan 发表于 2017-2-17 08:38
我不是大神~~我也是跟着来论坛大神学的，我改了型号以后升级了，升级到最新的了
...
有什么好软件介绍吗，我的升级后也好了
