E900-S TTL读取的数据，但是无法输入，请大神帮忙看下代码
这是通过ttl读取出的e900-s的代码，看不懂，也无法输入，还请哪位大侠帮忙看下，什么问题，万分感谢！init: sys_prop: permission denied uid:1003name:service.bootanim.exit
usb_storage: exports duplicate symbol fill_inquiry_response (owned by kernel)
ehci_hcd: exports duplicate symbol ehci_init_driver (owned by kernel)
AC_ON
MIU0_DQS-OK
BIST0-
MIU0-1024_U
Relocation Offset is: 011d7000
U-Boot 2011.06 (Sep 22 2016 - 14:17:25)
miu opencreate instance at 559e9418 with private size 80 bytes at 559e9460
create instance at 559e94b8 with private size 52 bytes at 559e9500
uboot held at ,size=013220a0
CPU: Clippers
Board: BD_MST207C_D01A_S_CLIPPERS
DRAM:875 MiB
Now running in RAM - U-Boot at: 55c00000
eMMC: HS200 200MHz
eMMC 7.28 GB
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Set MAC default
MAC:0x0: 0x30: 0x1b: 0xba:0x2: 0xdb
msIR_Initialize
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x0), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37bb0000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x1), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37930000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x2), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37130000)
[======= initialize DEC-R2 SHM =======]
[======= initialize DEC-R2 SHM =======]
DEC System code download finished!v_AUDIO_DecoderLoadCode()
cpu opencreate instance at 559f99c0 with private size 44 bytes at 559f9a08
CPUIoctl - MDrv_CMD_CPU_QueryClock
close moduleNames: MODULE_CPU
lwx_debug:boot_protect 0
Changelist: 24543697
============= set bootargs ===============
Hit any key to stop autoboot:0
AC on
get ir boot mode, count is 1
fore uup IRKey
get ir boot mode, count is 2
fore uup IRKey
get ir boot mode, count is 3
fore uup IRKey
get ir boot mode, count is 4
fore uup IRKey
get ir boot mode, count is 5
fore uup IRKey
get ir boot mode, count is 6
fore uup IRKey
get ir boot mode, count is 7
fore uup IRKey
get ir boot mode, count is 8
fore uup IRKey
get ir boot mode, count is 9
fore uup IRKey
get ir boot mode, count is 10
fore uup IRKey
get ir boot mode, count is 11
fore uup IRKey
get ir boot mode, count is 12
fore uup IRKey
PATCH FOR zte BEGIN
Watchdog_enable TRUE
Watchdog start, MAXTIME 120
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
create instance at 559f9c70 with private size 256 bytes at 559f9cb8
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
PNL:
pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
PNL:CalculateLPLLSETbyDClk u32KHz = 742500000, u64DefaultLdHz = 742500000
PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df
No instance existed, please get an instance by calling MApi_XC_Init() first
msHdmitx_Disp_Init
create instance at 559f9dc0 with private size 1720 bytes at 559f9e08
no need to patchcreate instance at 559faa08 with private size 80 bytes at 559faa50
Rx Support HDMI mode!
3-1 ssc_span_val=1887436800, ssc_step_val=0, reg_32value=2440322
3-2 ssc_span_val=773, ssc_step_val=0, reg_32value=2440322
3-3 ssc_span_val=773, ssc_step_val=3, reg_32value=2440322
msdbg REG_PKT_AVI_1_09=5850, 0x2008=2, bIs420=0
msdbg bIsMSO9280NC = 0, bIsHDMI20=0, b222MHz=0, idx=5, cd_val=0
setHDMITxAnalogTuning: Error: MApi_HDMITx_GetRxDCInfoFromEDID EDID is not ready, at 260
shift -8 pixels in PAL mode
Create Dolby single part name task failed!! ERROR!!! HVSD H input = 0, HVSD H output = 720
ERROR!!! HVSD V input = 0, HVSD V output = 576
bEnable = 0, bIsDNR2VE = 0
mmc change mount : userdata
Size of file "local/boot0.jpg" from mmc device 0 partition userdata: -1 bytes
mmc change mount : tvconfig
Size of file "/boot0.jpg" from mmc device 0 partition tvconfig: 180228 bytes
Loading file "/boot0.jpg" at offset 0x0 from mmc device 0 partition tvconfig
180228 bytes read
create instance at 559faaa8 with private size 304 bytes at 559faaf0
close moduleNames: MODULE_NJPEG_EX
create instance at 559faaa8 with private size 132280 bytes at 559faaf0
gop opencreate instance at 55a1afb0 with private size 6912 bytes at 55a1aff8
create instance at 55a1cb00 with private size 1720 bytes at 55a1cb48
GOPLoggop=3 alphainverse = 1 Ioctl_GOP_Init(6360)
GOPLog gopdst=0x0 gop=3 enable=1 MDrv_GOP_GWIN_SetAlphaInverse(3044)
GOPLog GopDst=0x2 gop=3MApi_GOP_GWIN_SetGOPDst(2956)
GOPLog GopDst=0x3 gop=3Ioctl_GOP_SetDst(7576)
GOPLog gopdst=0x3 gop=3 alphainverse = 1 _GOP_SetOCCapability(2781)
GOPLog gopdst=0x3 gop=3 enable=1 MDrv_GOP_GWIN_SetAlphaInverse(3044)
Unknown command 'uart_rx' - try 'help'
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 4798502 Bytes = 4.6 MiB
Load Address: 20208000
Entry Point:20208000
Contents:
Image 0: 4468848 Bytes = 4.3 MiB
Image 1: 329642 Bytes = 321.9 KiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
Starting kernel ...
, not expected dram size: 0x0
#######################################################################
# , miu kernel protect is not enabled on second dram #
#######################################################################
Uncompressing Linux... done, booting the kernel.
KERN-3.10.23.001049551
tommy: thread_info_cache_init
mtdoops: mtd device (mtddev=name/number) must be supplied
ready init mutex
after init mutex
RBQP_BASE = 53d04000
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
init: /init.clippers.rc: 351: ignored duplicate definition of service 'mdnsd'
init: /dev/hw_random not found
A N D R O I D
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
mdrv_software_ir: version magic 'SMP mod_unload ARMv7 ' should be '3.10.23 SMP preempt mod_unload ARMv7 '
init: /dev/hw_random not found
healthd: No charger supplies found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
root@orange:/ # fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
init: sys_prop: permission denied uid:1002name:persist.bt.fwdump
init: sys_prop: permission denied uid:1003name:service.bootanim.exit
usb_storage: exports duplicate symbol fill_inquiry_response (owned by kernel)
ehci_hcd: exports duplicate symbol ehci_init_driver (owned by kernel)
按一下 ctrl + c 就可以输入了 我的也是这种情况 中兴zxv10 B860AV1.1-T2机顶盒putty跑码完成不能输入命令 江西版本
怎么解决。我也是。 wan362527 发表于 2017-12-10 18:08
中兴zxv10 B860AV1.1-T2机顶盒putty跑码完成不能输入命令 江西版本
请问大哥解决了没，我也是这样，江西的 这个是什么情况？系统保护？怎么解决？ 这个问题已解决,已经刷了自由安装APP,扫头像发你视频证实兴奋的结果 冥河战神 发表于 2021-10-22 19:54
按一下 ctrl + c 就可以输入了
真的是这样谢谢你了。
页:
[1]