联通定制IP903H怎么破解？ 我用232脸上电脑就是打不开adb求...
▒HELLO! BOOT0 is starting!boot0 version : 4.2.0
fel_flag = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
DRAM DRIVE INFO: V0.8
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 576 MHz
DRAM zq value: 003b3bfb
READ DQS LCDL = 00202020
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 2
card no is 2
sdcard 2 line count 8
: mmc driver ver 2014-12-10 21:20:39
: ***Try SD card 2***
: mmc 2 cmd 8 err 00000100
: mmc 2 cmd 8 err 00000100
: mmc 2 send if cond failed
: mmc 2 cmd 55 err 00000100
: mmc 2 cmd 55 err 00000100
: mmc 2 send app cmd failed
: ***Try MMC card 2***
: 8bit ddr!!!
: MMC ver 5.0
: SD/MMC Card: 8bit, capacity: 3728MB
: vendor: Man 00150100 Snr 02a65cc0
: product: 4FPD3
: revision: 5.2
: ***SD/MMC 2 init OK!!!***
sdcard 2 init ok
The size of uboot is 000dc000.
sum=35dd634c
src_sum=35dd634c
set_mmc_para,sdly 50M 0
set_mmc_para,sdly 25M 0
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[ 0.248]e mode
U-Boot 2011.09-rc1 (Nov 16 2015 - 14:56:04) Allwinner Technology
[ 0.255]version: 1.1.0
normal mode
[ 0.262]pmbus: ready
not set main pmu id
axp_probe error
[ 0.299]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[ 0.330]DRAM:1 GiB
relocation Offset is: 35af7000
read rtc = 0x0
mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC: 2
[ 0.409]: mmc driver ver 2014-12-10 9:23:00
[ 0.414]: get sdc_phy_wipe fail.
[ 0.418]: get sdc0 sdc_erase fail.
[ 0.422]: get sdc_2xmode ok, val = 1
[ 0.426]: get sdc_ddrmode ok, val = 1
[ 0.430]: get sdc_f_max fail,use default50000000Hz
[ 0.436]: get card_line ok, card_line = 8
[ 0.440]: get sdc_ex_dly_used fail,use default
[ 0.445]: SUNXI SD/MMC: 2
[ 0.459]: *Try SD card 2*
[ 0.462]: mmc 2 cmd 8 err 100
[ 0.468]: mmc send if cond failed
[ 0.472]: mmc 2 cmd 55 err 100
[ 0.477]: send app cmd failed
[ 0.480]: *Try MMC card 2*
[ 0.520]: ddr8
[ 0.534]: CID 0x15010034 0x46504433 0x5202a65c 0xc0dcc21f
[ 0.539]: MMC ver 5.0
[ 0.542]: mmc clk 50000000
[ 0.545]: SD/MMC Card: 8bit, capacity: 3728MB
[ 0.550]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
[ 0.556]: ***SD/MMC 2 init OK!!!***
[ 0.561]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
[ 0.567]: secure_feature 0x55
[ 0.570]: secure_removal_type0x9
[ 0.574]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
disp_init_tv
disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
disp tv device_registered
unable to find regulator vcc-hdmi-18 from or
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
error: open tv_vdid.fex, maybe it is not exist
save_vendor_id=,value = 0
read byte = 10
= 404
read byte = 10
= 20b
boot_disp.auto_hpd=1
auto hpd check has 100 times!
auto check no any connected, the output_type is 2
attched ok, mgr1<-->device1, type=2, mode=11----
ready to set mode
disp_tv_enable
[ 1.980]finally, output_type=0x2, output_mode=0xb, screen_id=0x1, disp_para=0x20b0000
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:14-
-name- -start- -size-
bootloader: 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 30000000
misc : 34000000 1000000
recovery : 35000000 2000000
sysrecovery : 37000000 30000000
private : 67000000 1000000
Reserve0 : 68000000 1000000
klog : 69000000 1000000
Reserve1 : 6a000000 2000000
Reserve2 : 6c000000 1000000
cache : 6d000000 28000000
UDISK : 95000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
read item0 copy0
the secure storage item0 copy0 is good
name in map mac
the secure storage item2 copy0 is good
Don't need to decrypt object
updataed mac = AC:4A:FE:87:A3:E8
no item name wifi_mac in the map
sunxi storage read fail
no item name bt_mac in the map
sunxi storage read fail
name in map specialstr
the secure storage item3 copy0 is good
Don't need to decrypt object
updataed specialstr = 00000100000790300002AC4AFE87A3E8
no item name serialno in the map
sunxi storage read fail
check user data form private
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
f_read btr over hd12896
read byte = 3686456
[ 2.199]screen_id =1, screen_width =720, screen_height =576
[ 2.204]frame buffer address 46400036
[ 2.208]Hit any key to stop autoboot:0
read boot or recovery all
[ 2.364]sunxi flash read :offset 3000000, 12924457 bytes OK
[ 2.373]ready to boot
board_display_setenv:disp_para=20b0000 init_disp=20b0404 tv_vdid=0
[ 2.381]: mmc exit start
[ 2.400]: mmc 2 cmd 8 err 100
[ 2.405]: mmc send if cond failed
[ 2.409]: mmc 2 cmd 55 err 100
[ 2.414]: send app cmd failed
[ 2.426]: get sdc_phy_wipe fail.
[ 2.430]: get sdc0 sdc_erase fail.
[ 2.434]: get sdc_2xmode ok, val = 1
[ 2.438]: get sdc_ddrmode ok, val = 1
[ 2.442]: get sdc_f_max fail,use default50000000Hz
[ 2.447]: get card_line ok, card_line = 8
[ 2.452]: get sdc_ex_dly_used fail,use default
[ 2.457]: mmc 2 exit ok
[ 2.460]
Starting kernel ...
: From boot, get meminfo:
Start:0x40000000
Size: 1024MB
ion_carveout reserve: 160m@0 312m@0 130m@1 200m@1
ion_reserve_common: ion reserve: !
<7[ 0.760042] ls_fetch_sysconfig_para: type errdevice_used = -1064120172.
[ 0.768015] WARNING: Rtc time will be wrong!!
[ 0.773515] WARNING: use *internal OSC* as clock source
[ 0.782829] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[ 0.806674] sunxi_oops: heming add OOPS_INFO_ADDR = -20
[ 0.859805] ths_fetch_sysconfig_para: type errdevice_used = 1.
[ 0.924544] init: open path: /dev/bus/usb/001/001
[ 1.071107] init: open path: /dev/bus/usb/002/001
[ 1.222990] init: open path: /dev/bus/usb/003/001
[ 1.370974] init: open path: /dev/bus/usb/004/001
[ 1.544274] init: /dev/hw_random not found
[ 1.549159] init: defined DONT_SHOW_INITLOGO
[ 1.752015] init: start e2fsck listening...
[ 2.127705] init: dont need format /dev/block/by-name/private
[ 2.206373] Failed to get mali parameter!
[ 2.275184] failed to get normal led pin assign
[ 2.280243] failed to get standby led pin assign
[ 2.339195] init: /dev/hw_random not found
[ 2.358503] init: untracked pid 82 exited
[ 2.359226] healthd: Could not open /sys/class/power_supply
[ 2.359240] healthd: No charger supplies found
[ 2.378195] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 2.461819] android_usb: already disabled
[ 2.466525] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 2.477882] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
root@IP903H-54U3:/ # [ 2.756633] init: C_IN_START
[ 2.759678] init: path = /dev/block/by-name/cache
[ 2.765818] init: C_IN_START
[ 2.769052] init: path = /dev/block/by-name/UDISK
[ 8.727021] notice: set wl_reg_on 0 to power on 8188eu in sun8iw7p1!
[ 8.791082] init: open path: /dev/bus/usb/005/001
[ 8.799037] hci: ERR: sunxi_ohci is null
[ 8.865907] init: no such service 'fuse_extsd'
[ 9.261923] init: open path: /dev/bus/usb/005/002
[ 10.146374] init: sys_prop: permission denied uid:1003name:service.bootanim.exit
[ 12.931947] qtaguid: iface_stat: stat_update() wlan0 not found
root@IP903H-54U3:/ # start adbd
root@IP903H-54U3:/ # cd..
/system/bin/sh: cd..: not found
127|root@IP903H-54U3:/ # cd.
/system/bin/sh: cd.: not found
127|root@IP903H-54U3:/ # cd\
> adb
/system/bin/sh: cdadb: not found
127|root@IP903H-54U3:/ # adbd
cannot bind 'tcp:5037'
1|root@IP903H-54U3:/ # adb.exe
/system/bin/sh: adb.exe: not found
127|root@IP903H-54U3:/ #
127|root@IP903H-54U3:/ # start adbd
root@IP903H-54U3:/ # cd d:\
> dir
/system/bin/sh: cd: /d:dir: No such file or directory
2|root@IP903H-54U3:/ # cd c:\
> adb kill-server
/system/bin/sh: cd: bad substitution
2|root@IP903H-54U3:/ # adb start-server
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
root@IP903H-54U3:/ # adb version
Android Debug Bridge version 1.0.31
root@IP903H-54U3:/ # adb root
error: device not found
1|root@IP903H-54U3:/ # adb shell
error: device not found
1|root@IP903H-54U3:/ # cd "c:\root
> adb root
> dir
> tree
> nbsp
> off
>
> exit
> adbx
>
> HELLO! BOOT0 is starting!
boot0 version : 4.2.0
fel_flag = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
DRAM DRIVE INFO: V0.8
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 576 MHz
DRAM zq value: 003b3bfb
READ DQS LCDL = 00202020
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 2
card no is 2
sdcard 2 line count 8
: mmc driver ver 2014-12-10 21:20:39
: ***Try SD card 2***
: mmc 2 cmd 8 err 00000100
: mmc 2 cmd 8 err 00000100
: mmc 2 send if cond failed
: mmc 2 cmd 55 err 00000100
: mmc 2 cmd 55 err 00000100
: mmc 2 send app cmd failed
: ***Try MMC card 2***
: 8bit ddr!!!
: MMC ver 5.0
: SD/MMC Card: 8bit, capacity: 3728MB
: vendor: Man 00150100 Snr 02a65cc0
: product: 4FPD3
: revision: 5.2
: ***SD/MMC 2 init OK!!!***
sdcard 2 init ok
The size of uboot is 000dc000.
sum=35dd634c
src_sum=35dd634c
set_mmc_para,sdly 50M 0
set_mmc_para,sdly 25M 0
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[ 0.248]e mode
U-Boot 2011.09-rc1 (Nov 16 2015 - 14:56:04) Allwinner Technology
[ 0.255]version: 1.1.0
normal mode
[ 0.262]pmbus: ready
not set main pmu id
axp_probe error
[ 0.299]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[ 0.330]DRAM:1 GiB
relocation Offset is: 35af7000
read rtc = 0x0
mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC: 2
[ 0.409]: mmc driver ver 2014-12-10 9:23:00
[ 0.414]: get sdc_phy_wipe fail.
[ 0.418]: get sdc0 sdc_erase fail.
[ 0.422]: get sdc_2xmode ok, val = 1
[ 0.426]: get sdc_ddrmode ok, val = 1
[ 0.430]: get sdc_f_max fail,use default50000000Hz
[ 0.436]: get card_line ok, card_line = 8
[ 0.440]: get sdc_ex_dly_used fail,use default
[ 0.445]: SUNXI SD/MMC: 2
[ 0.459]: *Try SD card 2*
[ 0.462]: mmc 2 cmd 8 err 100
[ 0.468]: mmc send if cond failed
[ 0.472]: mmc 2 cmd 55 err 100
[ 0.477]: send app cmd failed
[ 0.480]: *Try MMC card 2*
[ 0.520]: ddr8
[ 0.534]: CID 0x15010034 0x46504433 0x5202a65c 0xc0dcc21f
[ 0.539]: MMC ver 5.0
[ 0.542]: mmc clk 50000000
[ 0.545]: SD/MMC Card: 8bit, capacity: 3728MB
[ 0.550]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
[ 0.556]: ***SD/MMC 2 init OK!!!***
[ 0.561]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
[ 0.567]: secure_feature 0x55
[ 0.570]: secure_removal_type0x9
[ 0.574]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
disp_init_tv
disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
disp tv device_registered
unable to find regulator vcc-hdmi-18 from or
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
error: open tv_vdid.fex, maybe it is not exist
save_vendor_id=,value = 0
read byte = 10
= 404
read byte = 10
= 20b
boot_disp.auto_hpd=1
auto hpd check has 100 times!
auto check no any connected, the output_type is 2
attched ok, mgr1<-->device1, type=2, mode=11----
ready to set mode
disp_tv_enable
[ 1.980]finally, output_type=0x2, output_mode=0xb, screen_id=0x1, disp_para=0x20b0000
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:14-
-name- -start- -size-
bootloader: 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 30000000
misc : 34000000 1000000
recovery : 35000000 2000000
sysrecovery : 37000000 30000000
private : 67000000 1000000
Reserve0 : 68000000 1000000
klog : 69000000 1000000
Reserve1 : 6a000000 2000000
Reserve2 : 6c000000 1000000
cache : 6d000000 28000000
UDISK : 95000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
read item0 copy0
the secure storage item0 copy0 is good
name in map mac
the secure storage item2 copy0 is good
Don't need to decrypt object
updataed mac = AC:4A:FE:87:A3:E8
no item name wifi_mac in the map
sunxi storage read fail
no item name bt_mac in the map
sunxi storage read fail
name in map specialstr
the secure storage item3 copy0 is good
Don't need to decrypt object
updataed specialstr = 00000100000790300002AC4AFE87A3E8
no item name serialno in the map
sunxi storage read fail
check user data form private
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
f_read btr over hd12896
read byte = 3686456
[ 2.199]screen_id =1, screen_width =720, screen_height =576
[ 2.204]frame buffer address 46400036
[ 2.208]Hit any key to stop autoboot:0
read boot or recovery all
[ 2.365]sunxi flash read :offset 3000000, 12924457 bytes OK
[ 2.374]ready to boot
board_display_setenv:disp_para=20b0000 init_disp=20b0404 tv_vdid=0
[ 2.382]: mmc exit start
[ 2.398]: mmc 2 cmd 8 err 100
[ 2.403]: mmc send if cond failed
[ 2.407]: mmc 2 cmd 55 err 100
[ 2.412]: send app cmd failed
[ 2.424]: get sdc_phy_wipe fail.
[ 2.428]: get sdc0 sdc_erase fail.
[ 2.432]: get sdc_2xmode ok, val = 1
[ 2.436]: get sdc_ddrmode ok, val = 1
[ 2.440]: get sdc_f_max fail,use default50000000Hz
[ 2.445]: get card_line ok, card_line = 8
[ 2.450]: get sdc_ex_dly_used fail,use default
[ 2.455]: mmc 2 exit ok
[ 2.458]
Starting kernel ...
: From boot, get meminfo:
Start:0x40000000
Size: 1024MB
ion_carveout reserve: 160m@0 312m@0 130m@1 200m@1
ion_reserve_common: ion reserve: !
<7[ 0.770043] ls_fetch_sysconfig_para: type errdevice_used = -1064120172.
[ 0.778018] WARNING: Rtc time will be wrong!!
[ 0.783517] WARNING: use *internal OSC* as clock source
[ 0.792821] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[ 0.816683] sunxi_oops: heming add OOPS_INFO_ADDR = -20
[ 0.869816] ths_fetch_sysconfig_para: type errdevice_used = 1.
[ 0.934090] init: open path: /dev/bus/usb/001/001
[ 1.081249] init: open path: /dev/bus/usb/002/001
[ 1.242970] init: open path: /dev/bus/usb/003/001
[ 1.400984] init: open path: /dev/bus/usb/004/001
[ 1.634801] init: /dev/hw_random not found
[ 1.639675] init: defined DONT_SHOW_INITLOGO
[ 1.852046] init: start e2fsck listening...
[ 2.217689] init: dont need format /dev/block/by-name/private
[ 2.298069] Failed to get mali parameter!
[ 2.366544] failed to get normal led pin assign
[ 2.371603] failed to get standby led pin assign
[ 2.429599] init: /dev/hw_random not found
[ 2.448346] init: untracked pid 82 exited
[ 2.449385] healthd: Could not open /sys/class/power_supply
[ 2.449399] healthd: No charger supplies found
[ 2.467991] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 2.572331] android_usb: already disabled
[ 2.576972] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 2.588213] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
root@IP903H-54U3:/ # [ 2.856684] init: C_IN_START
[ 2.859731] init: path = /dev/block/by-name/cache
[ 2.865075] init: C_IN_START
[ 2.868316] init: path = /dev/block/by-name/UDISK
[ 8.737482] notice: set wl_reg_on 0 to power on 8188eu in sun8iw7p1!
[ 8.792727] init: open path: /dev/bus/usb/005/001
[ 8.800491] hci: ERR: sunxi_ohci is null
[ 8.886438] init: no such service 'fuse_extsd'
[ 9.272554] init: open path: /dev/bus/usb/005/002
[ 10.129138] init: sys_prop: permission denied uid:1003name:service.bootanim.exit
[ 12.707155] qtaguid: iface_stat: stat_update() wlan0 not found
以上是开机过程自动跑出的代码 ，以下是我自己根据网友的提示敲的，我也不懂 瞎敲，但是无论怎么样都连不上悟空助手等等的软件。
start adbd
root@IP903H-54U3:/ # kill adb-server
/system/bin/sh: kill: adb-server: arguments must be jobs or process IDs
1|root@IP903H-54U3:/ # start adb-server
[ 66.271887] init: no such service 'adb-server'
root@IP903H-54U3:/ # adb shell
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
1|root@IP903H-54U3:/ # nbsp
/system/bin/sh: nbsp: not found
127|root@IP903H-54U3:/ # ADB devices
/system/bin/sh: ADB: not found
127|root@IP903H-54U3:/ # adbdevices
/system/bin/sh: adbdevices: not found
127|root@IP903H-54U3:/ # adb devices
List of devices attached
root@IP903H-54U3:/ # adb root
error: device not found
1|root@IP903H-54U3:/ #
亲 怎么能把你这源代码写道盒子里去啊
全力支持 老铁666！必须支持一波！
页:
[1]
