CM311-3-YST(1G+8G)-晨星MSO9385 TTL线刷请教一下
CM311-3-YST(1G+8G)-晨星MSO9385 TTL线刷输入三个命令
第一，第二正常执行
第三个命令（avbab disable-verity）不能识别
请教大神帮助看一下什么原因，谢谢
以下是开机代码：
*********u16CZ*****************
00000001
*********u16DO*****************
00000001
*********_3padInitTbl*****************
20082900
*********Load OneBin Pad address:*****************
20082900
EMMC
Relocation Offset is: 015FF000
U-Boot 2011.06-00000-g575ae8d-dirty (Sep 01 2021 - 17:23:07)
===== sw IR Config Register =====
===== Attach IR Interrupt======
Function = SYSOpen, Line = 794, current resource pri_shm content is: 0
Function = SYSOpen, Line = 813, OPEN INSTANCE...
create instance at 2D7F8358 with private size 108 bytes at 2D7F83A0
miu opencreate instance at 2D7F8410 with private size 88 bytes at 2D7F8458
create instance at 2D7F84B8 with private size 44 bytes at 2D7F8500
uboot held at ,size=013220A0
DRAM:233 MiB
Now running in RAM - U-Boot at: 2DE00000
eMMC: HS200 200MHz
eMMC 7.12 GB
SAR5=ON
In: serial
Out: serial
Err: serial
Net: No ethernet found.
MAC:0xAC: 0xBB: 0x61: 0xD7:0xCF: 0x45
create instance at 2D808968 with private size 44 bytes at 2D8089B0
mmc change mount : tvconfig
Size of file "/config/sys.ini" from mmc device 0 partition tvconfig: 1809 bytes
Loading file "/config/sys.ini" at offset 0x0 from mmc device 0 partition tvconfig
1809 bytes read
sizeof( sys ini script ) --------> 1809 bytes
set platform=mi to bootargs OK
customer_ini_path env value --> /vendor/tvconfig/config/model/Customer_1.ini
Half model.ini path --> /vendor/tvconfig/config/model/Customer_1.ini
** File not found /vendor/tvconfig/config/model/Customer_1.ini
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /vendor/tvconfig/config/model/Customer_1.ini
vfs_getsize:424: ext4filesize mmc fail
loadscript:867: No enough buffer or path fail(/vendor/tvconfig/config/model/Customer_1.ini) :
filter /tvconfig/config/model/Customer_1.ini, and find file again!!
** File not found /tvconfig/config/model/Customer_1.ini
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /tvconfig/config/model/Customer_1.ini
vfs_getsize:424: ext4filesize mmc fail
loadscript:867: No enough buffer or path fail(/tvconfig/config/model/Customer_1.ini) :
Half model.ini path --> /vendor/tvconfig/config/model/Customer_1.ini
Full model.inipath --> /vendor/tvconfig/config/model/Customer_1.ini
Full model.inipath --> /vendor/tvconfig/config/model/Customer_1.ini
** File not found /vendor/tvconfig/config/model/Customer_1.ini
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /vendor/tvconfig/config/model/Customer_1.ini
vfs_getsize:424: ext4filesize mmc fail
loadscript:867: No enough buffer or path fail(/vendor/tvconfig/config/model/Customer_1.ini) :
mmc change mount : tvconfig
** File not found /vendor/vendor/tvconfig/config/model/Customer_1.ini
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /vendor/vendor/tvconfig/config/model/Customer_1.ini
vfs_getsize:424: ext4filesize mmc fail
loadscript:867: No enough buffer or path fail(/vendor/vendor/tvconfig/config/model/Customer_1.ini) :
filter /config, and find file again!!
** File not found /vendor/tvconfig/config/model/Customer_1.ini
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found /vendor/tvconfig/config/model/Customer_1.ini
vfs_getsize:424: ext4filesize mmc fail
loadscript:867: No enough buffer or path fail(/vendor/tvconfig/config/model/Customer_1.ini) :
mmc change mount : tvconfig
mmc change mount : system
** File not found system/media/boot0.jpg
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found system/media/boot0.jpg
vfs_getsize:424: ext4filesize mmc fail
mmc change mount : tvconfig
prepare_nand_dbtable:1055: /system/system/media/boot0.jpg do not exist !
** File not found 2D5DCDF4
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found 2D5DCDF4
vfs_getsize:424: ext4filesize mmc fail
gRGBWPath=
gstDbtable.dbdata.Size=0x0
MPOOL size : 0x200000
mmc change mount : tvconfig
Size of file "/config/panel/DACOUT_1080P_60.ini" from mmc device 0 partition tvconfig: 6006 bytes
Loading file "/config/panel/DACOUT_1080P_60.ini" at offset 0x0 from mmc device 0 partition tvconfig
6006 bytes read
sizeof( panel ini script ) --------> 6006 bytes
u32PeriodPWM = 0
u32DutyPWM = 0x0
mmc change mount : tvconfig
** File not found 2D5DD104
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found 2D5DD104
vfs_getsize:424: ext4filesize mmc fail
loadscript:867: No enough buffer or path fail() :
filter /config, and find file again!!
vfs_getsize:393: filedir is a null pointer
loadscript:867: No enough buffer or path fail() :
Load_BoardSetting_ToFlash:2111: parse_board_ini fail !!
set resolution info to bootargs
mmc change mount : tvconfig
Size of file "/config/dfbrc.ini" from mmc device 0 partition tvconfig: 1464 bytes
Loading file "/config/dfbrc.ini" at offset 0x0 from mmc device 0 partition tvconfig
1464 bytes read
sizeof( dfb ini script ) --------> 1464 bytes
logo ->
mmc change mount : tvconfig
Size of file "/config/ir_config.ini" from mmc device 0 partition tvconfig: 9236 bytes
Loading file "/config/ir_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
9236 bytes read
sizeof( ir_config ini script ) --------> 9236 bytes
section = MIR_Mstar
section = MIR_ChinaMobile
section = MIR_ChinaUnicom
section = MIR_ChinaTelecom
section = MIR_ChinaMobile_00FF
Size of file "/config/ir_config.ini" from mmc device 0 partition tvconfig: 9236 bytes
Loading file "/config/ir_config.ini" at offset 0x0 from mmc device 0 partition tvconfig
9236 bytes read
sizeof( ir_config ini script ) --------> 9236 bytes
section = PIR_ChinaMobile_00FF
section = PIR_ChinaMobile_2014
section = PIR_ChinaMobile
mmc change mount : tvconfig
** File not found 2D5DD214
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found 2D5DD214
vfs_getsize:424: ext4filesize mmc fail
Load_RGBWBinToFlash:2715: vfs_getsize error:!
3 blocks written: OK
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
Changelist: 00112233
============= set bootargs ===============
===== zjj.... before shezhi ipaddr ===AC:BB:61:D7:CF:45==17
============= after bootargs ===============
set_bootargs_cfg:940: New bootargs( NewArgLen : 1260) has exceeded the env_size( CONFIG_SYS_CBSIZE :1024 )
set_bootargs_cfg failed !
set_security_cfg:1112: set SECURITY=ON/OFF to bootargs fail
WDT is not Enable !!!setenv WDT_ENABLE 1 to enable it.
Hit any key to stop autoboot:0
C2P#
C2P#
C2P#
C2P#
C2P#
刷机固件是不是用错了？ 如果有mstarupgrade.bin文件，那么插入U盘执行usb_bin_check就行，没必要这么麻烦，如果没有且砖了，就要恢复分区，恢复分区有一定顺序 royalwei 发表于 2024-1-30 09:37
如果有mstarupgrade.bin文件，那么插入U盘执行usb_bin_check就行，没必要这么麻烦，如果没有且砖了，就要恢 ...
砖了，不麻烦的话可以请教下如何恢复分区吗？谢谢 royalwei 发表于 2024-1-30 09:37
如果有mstarupgrade.bin文件，那么插入U盘执行usb_bin_check就行，没必要这么麻烦，如果没有且砖了，就要恢 ...
老师按你说的做了，出现如下字符串麻烦你给看下，谢谢
换包
https://www.znds.com/tv-1236613-1-1.html 2+8，网上大多都是2+8的包，找1+8的包 你发给我文本的意思是分区校验失败，可能是包不对，可能是U盘问题 本帖最后由 zwb1616 于 2024-1-30 16:52 编辑
royalwei 发表于 2024-1-30 13:20
你发给我文本的意思是分区校验失败，可能是包不对，可能是U盘问题
1+8G的包找了很久了，找不到了，2+8G的包倒是下了几个CM311-3 的，也找到了几个卡刷包cm311-3s的，但是都出现我给你看的文件里的内容一样的。但是2+8G的救砖包里的文件大部分会提示超范围不能写入，复制avbab disable-verity，粘贴后按回车；这个avbab disable-verity 不能执行C2P#C2P#
C2P# setenv devicestate unlock
C2P# saveenv
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
C2P# avbab disable-verity
Unknown command 'avbab' - try 'help'
C2P#
页:
[1]
2
