Hk1 RBOX X4无法将CE装到EMMC中
本帖最后由 智能小柠檬 于 2023-8-6 19:13 编辑使用安装全emmc的命令后,不显示1,2,只有3,4,意味着905x4这个不支持双系统吗?
还是我选择的启动包“sc2_s905x4_4g_1gbit.dtb”不正确?
请大佬赐教啊~~~{:120:}
CoreELEC:~ # ceemmc -x
Starting CoreELEC eMMC installation tool...
System is not supported: sc2_s905x4_4g_1gbit!
There is NO official support by Team CoreELEC
if you continue to run this tool!
Continue? : y
eMMC size: 0x000e8f800000
No CoreELEC installation found on eMMC
Install in single boot mode, only CoreELEC on eMMC
Use CoreELEC data from
current used SD or USB device
existing backup on current used SD or USB device
Install in dual boot mode not possible!
Please choose one option? :
试试 20 alpha3
Fixed ceemmc error: Error opening file for reading '/dev/reserved' 意:原版 bootloader 已导出到 /root/bootloader_backup.img , 请注意下载并保存!
所有步骤均已完成!
猴属性者: 请输入 reboot 命令重启动,然后迅速拔掉 SD卡或U盘 !
龟属性者: 请输入 poweroff 命令关机,拔除 SD卡或U盘 之后再开机 !
神属性者: 可以直接拔电! CE目前不支持905X4安装到EMMC,然而支持905W2的EMMC安装 同样问题,怎么办 一样,解决了吗? 同问,要换ATV 和 Ce重刷吗 看来是只能装单系统,不能双系统共存 刚才看有大佬说安装夜晚版就可以了。
CoreELEC-Amlogic-ne.aarch64-20.5-Nexus-Generic.img.gz
页:
[1]