请问创维Q0105盒子ttl以后怎么刷入usb的固件
本帖最后由 智能小柠檬 于 2023-3-26 20:27 编辑盒子是创维Q0105，芯片是全志H2 是刷入u盘的固件 先要你会用TTL线，找到接入点，接好，跑下，再找个盒子相应固件，用命令刷（命令网上可找，你复下就可以了） zbnb429 发表于 2023-3-26 15:00
先要你会用TTL线，找到接入点，接好，跑下，再找个盒子相应固件，用命令刷（命令网上可找，你复下就可以了 ...
这个是报错部分跑码，后面输入df显示无效指令，有什么法子码
begin erase part
finish erase part
[ 7.198]begin to download part bootloader
partdata hi 0x0
partdata lo 0x7c1400
sparse: bad magic
[ 8.466]successed in wri**ng part bootloader
origin_verify value = 1878e3ec, active_verify value = 1878e3ec
[ 8.865]successed in verify part bootloader
[ 8.869]successed in download part bootloader
[ 8.873]begin to download part env
env part do not need to rewrite
[ 8.880]begin to download part boot
partdata hi 0x0
partdata lo 0xbec000
sparse: bad magic
[ 10.824]successed in wri**ng part boot
origin_verify value = f88f5759, active_verify value = f88f5759
[ 11.428]successed in verify part boot
[ 11.432]successed in download part boot
[ 11.436]begin to download part system
最后显示
sunxi sprite error: download sparse error SYSTEM_FEX000000VSYSTEM_FEX00000
sunxi sprite err: sunxi_sprite_deal_part, download normal failed
sunxi sprite error : download part error
页:
[1]