中兴B860A卡LOGO，TTL返回错误。。。
本帖最后由 智能小柠檬 于 2023-2-21 09:48 编辑TTL返回有错误，（U盘卡刷失败：10015），大神看看怎么救？
m8m2_n200_v1#
m8m2_n200_v1#safe
not found mac in efuse
head magic=414e4452
hdcp init_hdcp_ram...
mmc fail to send stop cmd
MMC read: dev # 1, block # 0x20000, count # 0x800, byte_size # 0x0 ERROR!
mmc cmd read failed
nand cmd store failed
Err imgread(L323):Fail to read 0x100000B from part at offset 0
Aml log : M8-R1024 IMG fail!
boot system safe failed, try boot norm!
head magic=414e4452
hdcp init_hdcp_ram...
Secure kernel sz 0x713120
mmc fail to send stop cmd
MMC read: dev # 1, block # 0x30800, count # 0x3098, byte_size # 0x120 ERROR!
mmc cmd read failed
nand cmd store failed
Err imgread(L358):Fail to read 0x613120B from part at offset 0x100000
Aml log : M8-R1024 IMG fail!
m8m2_n200_v1#
板子没看到别人说的芯片，没有什么1-2脚，也没有R25,C105啥的？
U盘卡刷失败，错误10015.。线刷认不到设备。。。
不带后缀的B860A，记得内置了ota.zip包，试试reboot recovery能不能恢复原厂固件 : draw_logo 1522
before thedecompressToRGB
Start to decode the LOGO jpeg ...
: before the decompress_jpeg_rgb
: Call decompress_pic_rgb565(id=3,addr=1106e1ac,size=423076,maxw=1920,maxh=1080,Bpp=3) ...
: after the decompress_jpeg_rgb
: Success in decoding LOGO src file: (w=1280,h=720,Bpp=3,data=0x3f2a75f8)
: all LOGO's resource (Exc. logoThread) are released
Logo_disp ret: 0
not found mac in efuse
logo time: (BootPicTime minus 4s to fine tune)
do_bootsys to boot NORM
head magic=414e4452
hdcp init_hdcp_ram...
Secure kernel sz 0x713120
mmc fail to send stop cmd
MMC read: dev # 1, block # 0x30800, count # 0x3098, byte_size # 0x120 ERROR!
mmc cmd read failed
nand cmd store failed
Err imgread(L358):Fail to read 0x613120B from part at offset 0x100000
Aml log : M8-R1024 IMG fail!
boot system norm failed, try boot safe!
head magic=414e4452
hdcp init_hdcp_ram...
mmc fail to send stop cmd
MMC read: dev # 1, block # 0x20000, count # 0x800, byte_size # 0x0 ERROR!
mmc cmd read failed
nand cmd store failed
Err imgread(L323):Fail to read 0x100000B from part at offset 0
Aml log : M8-R1024 IMG fail!
m8m2_n200_v1#reboot recovery
Unknown command 'reboot' - try 'help'
m8m2_n200_v1#
本帖最后由 cn_heijin 于 2023-2-21 09:54 编辑
55D2UA 发表于 2023-2-21 08:50
不带后缀的B860A，记得内置了ota.zip包，试试reboot recovery能不能恢复原厂固件
试了命令，不行，未知命令
试了safe也不行
m8m2_n200_v1#safe
not found mac in efuse
head magic=414e4452
hdcp init_hdcp_ram...
mmc fail to send stop cmd
MMC read: dev # 1, block # 0x20000, count # 0x800, byte_size # 0x0 ERROR!
mmc cmd read failed
nand cmd store failed
Err imgread(L323):Fail to read 0x100000B from part at offset 0
Aml log : M8-R1024 IMG fail!
boot system safe failed, try boot norm!
head magic=414e4452
hdcp init_hdcp_ram...
Secure kernel sz 0x713120
mmc fail to send stop cmd
MMC read: dev # 1, block # 0x30800, count # 0x3098, byte_size # 0x120 ERROR!
mmc cmd read failed
nand cmd store failed
Err imgread(L358):Fail to read 0x613120B from part at offset 0x100000
Aml log : M8-R1024 IMG fail!
m8m2_n200_v1#
fastboot reboot recovery 55D2UA 发表于 2023-2-21 09:24
fastboot reboot recovery
未知命令，
m8m2_n200_v1#fastboot reboot recovery
Unknown command 'fastboot' - try 'help'
m8m2_n200_v1#
cn_heijin 发表于 2023-2-21 09:53
未知命令，
那就help看看支持哪些命令
页:
[1]
