lkus 发表于 2022-11-18 09:47

中兴ZXV10B860AV1.1 ms09280码跑到时这里就不跑

中兴ZXV10B860AV1.1 ms09280码跑到时这里就不跑请大神们指点一下

vfs_read:523: ext4load mmc fail
DecodeFile:757: Fail: Load_Photo2Dram return size is 0 !!
mmc change mount : tvcustomer
Size of file "/1080.jpg" from mmc device 0 partition tvcustomer: -1 bytes
Loading file "/1080.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
** File not found /1080.jpg **
vfs_read:523: ext4load mmc fail
DecodeFile:757: Fail: Load_Photo2Dram return size is 0 !!
mmc change mount : tvcustomer
Size of file "/NTSC.jpg" from mmc device 0 partition tvcustomer: -1 bytes
Loading file "/NTSC.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
** File not found /NTSC.jpg **
vfs_read:523: ext4load mmc fail
DecodeFile:757: Fail: Load_Photo2Dram return size is 0 !!
mmc change mount : tvcustomer
Size of file "/PAL.jpg" from mmc device 0 partition tvcustomer: -1 bytes
Loading file "/PAL.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
** File not found /PAL.jpg **
vfs_read:523: ext4load mmc fail
DecodeFile:757: Fail: Load_Photo2Dram return size is 0 !!
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x0), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x39280000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x1), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x39000000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x2), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x38800000)
shed!v_AUDIO_DecoderLoadCode()
boot is not valid
boot system norm failed, try boot safe!
3 blocks written: OK
      ready for input- please chooze: upgrade_d boot / upgrade_all
<< MStar >>#

月光※傾城 发表于 2022-11-18 12:21

刷机方法:
        1.接好TTL线，上电时不断按Ctrl+Z键进入Mboot。显示<< MStar >>#

        2.Mboot下输入mmcinfo，回车，查看返回信息，如果是3.多Gib就是4G的闪存，如果7.多Gib就是8G的闪存。

        3.U盘格式化为单分区FAT32，然后根据闪存大小把对应的MstarUpgrade.bin放入U盘根目录，插到盒子上。

        4.Mboot下输入usb_bin_check，回车。等待刷机完成自动重启。

电视机顶盒分享 发表于 2022-11-18 10:22

hnxxkj 发表于 2022-11-18 15:43

那已经可以刷机了，有固件就可刷！

Agasnzo 发表于 2024-11-16 22:12

ready for input- please chooze: upgrade_d boot / upgrade_all
<< MStar >>#

到这里怎么弄呢？下一步不知道该输入什么，upgrade_d boot或者upgrade_all输入都提示Unknown command 'upgrade_all' - try 'help'

Agasnzo 发表于 2024-11-16 22:21

Agasnzo 发表于 2024-11-16 22:12
ready for input- please chooze: upgrade_d boot / upgrade_all
>#



多次尝试，输入mmcinfo后立即输入usb_bin_check就开始刷了，但出现了红字error，唉，问题好多
页: [1]
查看完整版本: 中兴ZXV10B860AV1.1 ms09280码跑到时这里就不跑