这个到底是CM201-2还是211-2？
陕西移动魔百盒。盒子外壳背面标明CM201-2和YS字样，U盘刷了：[黑马固件]魔百和CM201-2 YS蓝牙语音当贝影视版通刷固件现不能开机，电源灯不亮，应该是变砖了！打开盒子，主板标示 CM211-2-DDR4X2，查看芯片型号：海思Hi3798 MV300H，WiFi模块：RTL8822CS。盒子标示的YS也不敢相信了！请教大神，我该刷201-2的包还是CM211-2的包？
我有这个型号的刷机包,刷机包是免拆机的 现在用PL-2303芯片的TTL连接，putty跑马显示：
Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK
lsadc voltage min: 000000FE, max: 00000100, aver: 000000FF, index: 00000004
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16
Invalid reg version
Boot auxiliary code execute failed.
STATE:0x00000000 0x00000000 0x00000000 0x00000000
putty还不能输入任何代码。
下载CM201-2 YS的备份固件包，用HiTool5.13烧写eMMC，出现：
Bootrom start
Boot Media: eMMC (Default Speed)
##############################################
Decrypt auxiliary code ...OK
lsadc voltage min: 000000FE, max: 00000101, aver: 000000FF, index: 00000004
Failed to send the boot data.
1. The system fails to run properly due to an error in boot code compilation.
2. If the secure boot function is disabled and boot rootkey is set for the OEM, the boot image is encrypted, but the boot rootkey used for encrypting the boot is different from the boot rootkey burnt to the OTP.
3. The chip OTP is set to forcibly decrypt the boot image. However, the boot is not correctly encrypted.
4. The board DDR is faulty.
5. The boot code does not support the type of the flash memory to be burnt. If the boot print function is enabled, you can view the printing information through the serial port, showing that the current flash memory type is not supported.
Timeout error.
Failed to send the head frame.
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16
Invalid reg version
Boot auxiliary code execute failed.
STATE:0x00000000 0x00000000 0x00000000 0x00000000
Failed to download fastboot!
难道彻底成砖了？谁有救砖包呢？
看芯片为准，不要看盒子包装 现在用PL-2303芯片的TTL连接，putty跑马显示
下载CM201-2 YS固件备份包，用HiTool5.13烧写eMMC，失败，显示如下：
哪位大神有CM201-2 3798MV300H或者CM211-23798MV300H的线刷包?
或者哪位大神指导一下？
211-2是四片的
201-2是两片的 我的也是这个型号的，也是刷完就砖了。 维我独尊A 发表于 2022-1-15 19:12
我的也是这个型号的，也是刷完就砖了。
我已经救砖成功，系统也刷好了，以及能正常使用了！ wang1233ja 发表于 2022-1-18 14:34
我已经救砖成功，系统也刷好了，以及能正常使用了！
最终用的什么固件刷好的 求楼主怎么救的，QQ1035120181