首页 › ROM固件下载 › [黑马固件]CM201-2朝歌版 新芒果不用拆机300、310通刷语音固件

lhx19591216 发表于 2022-4-9 08:04

这是一个很好的学习平台。学习学习。

13630786223 发表于 2022-4-10 21:11

刷完了怎么到中国移动的界面就死机了啊
如何处理

zhengtai 发表于 2022-4-26 14:08

刷机方法是什么？

ZT1202 发表于 2022-4-27 14:51

楼主用心了

zhushan 发表于 2022-5-12 18:10

一直显示 请稍后 ·估计是刷废了

tzdm 发表于 2022-7-28 11:20

本帖最后由 tzdm 于 2022-7-28 15:13 编辑

魔百盒CM201-2板号M8273刷入、启动成功，使用g。TTL连接界面显示有异常，高手看到后麻烦打点一下解决方法，secureCRT显示如下：

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
>>>init /home/projects/ANDROID-Hi3798MV300H-EMMC-L2-TELECOM-KITKAT-ENG-RELEASE-20181018/device/hisilicon/bigfish/sdk/source/kernel/linux-3.18.y/drivers/usb/usbir/usb-ir.cusb_usbir_init
>>>init /home/projects/ANDROID-Hi3798MV300H-EMMC-L2-TELECOM-KITKAT-ENG-RELEASE-20181018/device/hisilicon/bigfish/sdk/source/kernel/linux-3.18.y/drivers/swgpios/swgpios.cswgpios_init
swgpios Get GPIO function failed!
init: /init.bigfish.rc: 55: invalid command 'getprop'
init: /init.bigfish.rc: 114: invalid option 'sdcard_r'
init: /init.bigfish.rc: 239: invalid option '//add'
init: /init.bigfish.rc: 399: invalid command '//insmod'
init: /init.bigfish.rc: 404: invalid command '//insmod'
init: /init.bigfish.rc: 406: invalid command '//insmod'
init: /init.bigfish.rc: 407: invalid command '//insmod'
init: /init.bigfish.rc: 408: invalid command '//insmod'
init: /init.bigfish.rc: 425: invalid command '//insmod'
init: /init.swnetwork.rc: 61: ignored duplicate definition of service 'release_eth0'
init: /init.swnetwork.rc: 76: ignored duplicate definition of service 'release_wlan0'
init: /init.swnetwork.rc: 86: ignored duplicate definition of service 'release_ppp0'
init: could not import file '/init.sunniwell.rc' from '/init.rc'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: e2fsck /dev/block/platform/soc/by-name/system
init: e2fsck /dev/block/platform/soc/by-name/userdata
init: e2fsck /dev/block/platform/soc/by-name/swdb
init: e2fsck /dev/block/platform/soc/by-name/cache
init: /dev/hw_random not found
init: name:mac,value:54:C5:7A:4E:5F:5B
init: name:serialno,value:005001FF0001061003B154C57A4E5F5B
init: name:secureline,value:1
init: name:cmcc_sn,value:111001611286515
init: name:deviceid,value:111001611286515
init: sw_properties_init end..
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/teecd', disabling 'teecd'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/gpio-led', disabling 'gpio-led'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
healthd: No charger supplies found
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'

一时一刻 发表于 2022-7-31 06:22

6666

海信刷机 发表于 2022-9-3 09:36

使用 黑马固件投屏卡顿。

cmd. 发表于 2022-11-1 11:33

魔百盒背面写的是cm201-2系统里面是cm201-22 刷机到后面提示替换文件失败什么原因 芯片是CM201-2 海思芯片300/300H

查看完整版本: [黑马固件]CM201-2朝歌版 新芒果不用拆机300、310通刷语音固件