求助求助求助：重庆联通杰赛S65 拆机TTL 不成功最..._IPTV机顶盒_ZNDS

lyg2033 发表于 2018-4-27 16:19

求助求助求助：重庆联通杰赛S65 拆机TTL 不成功最...

求助：SecureCRT和putty ：重庆联通杰赛S65 拆机TTL 不成功显示：apks ..

lyg2033 发表于 2018-4-27 17:25

求助：重庆联通杰赛S65 拆机TTL破解不成功显示：apks ..

本帖最后由 lyg2033 于 2018-4-28 00:43 编辑

hao501802766 发表于 2018-4-27 17:21
Banned in copy operation on the path, path=/storage/external_storage/sda1>>>在路径、路径=/存储/exter ...
求助：SecureCRT和putty ：重庆联通杰赛S65 拆机TTL破解不成功显示：apks ..
GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 112905
BL2 Built : 01:56:32, Dec 22 2016.
gxl g1614c0b - xiaobo.gu@droid05
Board ID = 6, adc=499
set vcck to 1070 mv
set vddee to 1070 mv
CPU clk: 1200MHz
2layers board, use ddr_set
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz - PASS
Rank0: 1024MB(auto)-2T-11
DataBus test pass!
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x00007400
Load bl301 from eMMC, src: 0x00018200, des: 0x01200000, size: 0x00002200
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019400
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x00086400
NOTICE:BL3-1: v1.0(debug):959fdf0
NOTICE:BL3-1: Built : 15:01:44, Dec 29 2016
aml log : bl31 normal boot !

bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: ef be ad de d f0 ad ba ef be ad de not ES chip
efuse init ops = e2
efuse init hdcp = c, cf9=7

seINFcOu:r e t aBsLk3 -s1t:a rItn!it
ializing runthiimgehstearvices
WARNING: No OPTEE provided by BL2 boot loader
ERROR: Error initializing runtime service opteed_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9

U-Boot 2015.01-gcae2519-dirty (Feb 12 2017 - 15:46:08)
DRAM:1 GiB
Relocation Offset is: 36eec000
gpio: pin GPIODV_24 (gpio 43) value is 1
mwm 0xc8837004: with ok
mwm 0xc883700c: with ok
mwm 0xc8837010: with ok
mwm 0xc8837010: with ok
register usb cfg = 0000000037f61090
canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
MMC: aml_priv->desc_buf = 0x0000000033edcac0
aml_priv->desc_buf = 0x0000000033edede0
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x3ff2800
emmc/sd response timeout, cmd55, status=0x3ff2800
mmc init success
mmc read lba=0x14000, blocks=0x400
   Amlogic multi-dtb tool
   Multi dtb detected
   2layers board, board id use 7
   Multi dtb tool version: v2 .
   Support 6 dtbs.
   aml_dt soc: gxl platform: p211 variant: 1g
   dtb 0 soc: gxbb plat: p201 vari: 1g
   dtb 1 soc: gxbb plat: p201 vari: 2g
   dtb 2 soc: gxl plat: p211 vari: 1g
   dtb 3 soc: gxl plat: p211 vari: 2g
   dtb 4 soc: gxl plat: p215 vari: 1g
   dtb 5 soc: gxl plat: p215 vari: 2g
   Find match dtb: 2
start dts,buffer=0000000033ee1630,dt_addr=0000000033ef2e30
parts: 13
00:    logo 0000000002000000 1
01:recovery 0000000002000000 1
02:    rsv 0000000000800000 1
03:    tee 0000000000800000 1
04: crypt 0000000002000000 1
05:    misc 0000000002000000 1
06: instaboot 0000000020000000 1
07:    boot 0000000002000000 1
08: system 0000000040000000 1
09: cache 0000000020000000 2
10: params 0000000004000000 2
11: bootfiles 0000000020000000 2
12:    data ffffffffffffffff 4
get_dtb_struct: Get emmc dtb OK!
overide_emmc_partition_table: overide cache
skip partition cache.
Partition table get from SPL is :
   name                      offset          size          flag
===================================================================================
0: bootloader                      0          400000                0
1: reserved                   2400000       4000000                0
2: cache                      6c00000       20000000                2
3: env                      27400000          800000                0
4: logo                      28400000       2000000                1
5: recovery                2ac00000       2000000                1
6: rsv                      2d400000          800000                1
7: tee                      2e400000          800000                1
8: crypt                   2f400000       2000000                1
9: misc                      31c00000       2000000                1
10: instaboot                34400000       20000000                1
11: boot                      54c00000       2000000                1
12: system                   57400000       40000000                1
13: params                   97c00000       4000000                2
14: bootfiles                9c400000       20000000                2
15: data                      bcc00000       115400000                4
mmc read lba=0x12000, blocks=0x2
mmc read lba=0x12002, blocks=0x2
mmc_read_partition_tbl: mmc read partition OK!
eMMC/TSD partition table have been checked OK!
mmc env offset: 0x27400000
In: serial
Out: serial
Err: serial
board id is : 6
hpd_state=0
cvbs performance type = 7, table = 1
To run cmd
read emmc dtb
   Amlogic multi-dtb tool
   Multi dtb detected
   Multi dtb tool version: v2 .
   Support 6 dtbs.
   aml_dt soc: gxl platform: p211 variant: 1g
   dtb 0 soc: gxbb plat: p201 vari: 1g
   dtb 1 soc: gxbb plat: p201 vari: 2g
   dtb 2 soc: gxl plat: p211 vari: 1g
   dtb 3 soc: gxl plat: p211 vari: 2g
   dtb 4 soc: gxl plat: p215 vari: 1g
   dtb 5 soc: gxl plat: p215 vari: 2g
   Find match dtb: 2
Net: dwmac.c9410000
wipe_data=successfulSecd
wipe_cache=successful
bmp pixel: 16
addr=0x3d800000 width=2560, height=1440
upgrade_step=2
amlkey_init() enter!
keynum is 4
: tee size: 0
Error:fL507:key not programed yet
gpio: pin GPIOAO_2 (gpio 102) value is 1
rebootmode=cold_boot
Hit any key to stop autoboot:0
ee_gate_off ...
## Booting Android Image at 0x01080000 ...
reloc_addr =33f09250
copy done
   Amlogic multi-dtb tool
   Single dtb detected
load dtb from 0x1000000 ......
Uncompressing Kernel Image ... OK
kernel loaded at 0x01080000, end = 0x01f57020
Loading Ramdisk to 33c6c000, end 33ed9b21 ... OK
Loading Device Tree to 000000001fff3000, end 000000001ffff41a ... OK
signature:
fdt_instaboot: get header err
Starting kernel ...
uboot time: 1955599 us
[ 0.000000@0] Initializing cgroup subsys cpu
[ 0.000000@0] Initializing cgroup subsys cpuacct
[ 0.000000@0] Linux version 3.14.29-svn662 (hej@gci2017-Super-Server) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Mar 20 17:18:24 CST 2018
[ 0.000000@0] CPU: armv71 Processor revision 4
[ 0.000000@0] bootconsole enabled
get_dvfs_info 0007
INFO: HDCP22 key read fail!
INFO: p1d 0
INFO: pd1 0
root@p201_iptv:/ # start adbd
root@p201_iptv:/ # stard adbd
/system/bin/sh: stard: not found
127|root@p201_iptv:/ # $su
root@p201_iptv:/ # df
Filesystem             Size Used Free Blksize
/dev                425.8M 128.0K 425.7M 4096
/sys/fs/cgroup       425.8M 12.0K 425.8M 4096
/mnt/asec          425.8M 0.0K 425.8M 4096
/mnt/obb             425.8M 0.0K 425.8M 4096
/tmp                425.8M 8.0K 425.8M 4096
/tmp/playInfoLog    425.8M 0.0K 425.8M 4096
/tmp/capture       425.8M 0.0K 425.8M 4096
/tmp/begininfo       425.8M 0.0K 425.8M 4096
/tmp/collectinfo    425.8M 0.0K 425.8M 4096
/tmp/picinfo       425.8M 0.0K 425.8M 4096
/storage/external_storage 425.8M 0.0K 425.8M 4096
/system             991.9M 429.3M 562.6M 4096
/data                4.2G 211.3M 4.0G 4096
/cache             495.9M 672.0K 495.3M 4096
/params             59.0M 40.0K 58.9M 4096
/bootfiles          495.9M 384.0K 495.6M 4096
/mnt/shell/emulated    4.1G 211.3M 3.9G 4096
/swap_zram0          484.3M 20.0K 484.3M 4096
/storage/external_storage/sda1 1.9G 317.8M 1.6G 4096
root@p201_iptv:/ # cd /storage/external_storage/sda1
root@p201_iptv:/storage/external_storage/sda1 # ls
123.147.117.25 updategf.cdniptv.cqwin.com.txt
CWM recovery.zip
ESSettings.zip
System Volume Information
TWRP-3.2.1-1227-XIAOMI_MAX2-CN-wzsx150.zip
dangbei1.apk
dangbei2.APK
dbzs.APK
factory_update_param.aml
update.zip
root@p201_iptv:/storage/external_storage/sda1 # pm install dangbei1.apk
   pkg: dangbei1.apk
apks is not valid!
root@p201_iptv:/storage/external_storage/sda1 # pm install dbzs.apk
   pkg: dbzs.apk
apks is not valid!
root@p201_iptv:/storage/external_storage/sda1 #cp dangbei1.apk /data/app
Banned in copy operation on the path, path=/storage/external_storage/sda1
1|root@p201_iptv:/storage/external_storage/sda1 #

15823352545 发表于 2019-8-13 01:07

我是把system.img备份出来，再修改，添加当贝桌面软件和re管理器，在恢复回去，u盘不能直接安装软件，必须用re管理器，复制到盒子里面，再安装，就没有问题了，破解后，在当贝桌面不能自动联网，必须进一下联通的iptv，在联通的iptv界面，才能自动联网，然后按首页键，回到当贝桌面，就可以随意按软件看视频了，包括联通的iptv

lyg2033 发表于 2018-4-27 16:45

求助：
重庆联通杰赛S65 拆机TTL破解不成功最后显示：apks is not va******https://www.znds.com/home.php?mod=space&uid=813474&do=album&picid=81138

hao501802766 发表于 2018-4-27 16:47

用这段命令：先进入U盘，接着cp *.apk /data/app接着在启动桌面即可

lyg2033 发表于 2018-4-27 16:59

hao501802766 发表于 2018-4-27 16:47
用这段命令：先进入U盘，接着cp *.apk /data/app接着在启动桌面即可

重庆联通4K 杰赛S65 不成功啊！！！请看看：
https://www.znds.com/home.php?mod=space&uid=813474&do=album&picid=81138

lyg2033 发表于 2018-4-27 16:59

不行重庆联通4K 杰赛S65 不成功啊！！！请看看：
https://www.znds.com/home.php?mod=space&uid=813474&do=album&picid=81138

lyg2033 发表于 2018-4-27 17:06

求助：重庆联通杰赛S65 拆机TTL破解不成功显示：apks ..

本帖最后由 lyg2033 于 2018-4-27 17:09 编辑

/swap_zram0 484.3M 20.0K 484.3M 4096
/storage/external_storage/sda1 1.9G 317.8M 1.6G 4096
root@p201_iptv:/ # cd /storage/external_storage/sda1
root@p201_iptv:/storage/external_storage/sda1 # ls
123.147.117.25 updategf.cdniptv.cqwin.com.txt
CWM recovery.zip
ESSettings.zip
System Volume Information
TWRP-3.2.1-1227-XIAOMI_MAX2-CN-wzsx150.zip
dbsc.apk
dbzm.APK
dbzs.APK
factory_update_param.aml
update.zip
root@p201_iptv:/storage/external_storage/sda1 # cp dbsc.apk /data/app
Banned in copy operation on the path, path=/storage/external_storage/sda1
1|root@p201_iptv:/storage/external_storage/sda1 # cp dbzm.APK /data/app
Banned in copy operation on the path, path=/storage/external_storage/sda1不行啊
1|root@p201_iptv:/storage/external_storage/sda1 #

hao501802766 发表于 2018-4-27 17:21

Banned in copy operation on the path, path=/storage/external_storage/sda1>>>在路径、路径=/存储/external_storage/sda1中禁止复制操作。

居然复制也禁止了，限制越来越大咯，试试start adbd 能否打开adb吧

hizone 发表于 2019-6-10 20:15

基本键盘输入不了，反复多次有时候会能输入但是返回，ADB cannot bind 'tcp:5037' 如何解江苏联通

hellohxp 发表于 2019-8-11 10:11

lyg2033 发表于 2018-4-27 16:45
求助：
重庆联通杰赛S65 拆机TTL破解不成功最后显示：apks is not va******

复制apk文件到/data/app/目录再安装试试，如果复制也不成功用wget -O 命令直接从网上下载apk到/data/app目录再尝试安装

页: [1] 2

ZNDS智能电视网's Archiver