請大家幫忙看下我的A31S的海美迪H7四核是什麽問題,還有救不?
請大家幫忙看下我的A31S的海美迪H7四核是什麽問題,還有救不?這個是普通啓動的信息
HELLO! BOOT0 is starting!
boot0 version : 3.0.0
reg_addr 0x01f00100 =0x00000000
reg_addr 0x01f00104 =0x00000000
reg_addr 0x01f00108 =0x00000000
reg_addr 0x01f0010c =0x00000000
reg_addr 0x01f00110 =0x00000000
reg_addr 0x01f00114 =0x00000000
ver 1.03 clk = 432
cpu 1 pmu 1
dram size =1024
card boot number = 2
card no is 2
sdcard 2 line count 0
: SD/MMC Card: 4bit, capacity: 7393MB
: vendor: Man 0x00880803 Snr 0x00000670
: product: NCard
: revision: 1.0
sdcard 2 init ok
The size of uboot is 0x000b0000.
sum=0xa3365caa
src_sum=0xa3365caa
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[ 0.289]
U-Boot 2011.09-rc1-dirty (Sep 19 2015 - 12:30:50) Allwinner Technology
[ 0.297]version: 1.1.0
[ 0.300]pmbus: ready
[ 0.303]PMU: AXP221
[ 0.305]PMU: AXP22x found
[ 0.308]PMU: bat ratio = 100
[ 0.311]PMU: dcdc3 1260
[ 0.314]PMU: pll1 1008 Mhz
dcdc1_vol = 3000
dcdc2_vol = 1200
dcdc3_vol = 1260
dcdc4_vol = 1240
dcdc5_vol = 1500
aldo2_vol = 1800
aldo3_vol = 3000
cpus_source = 1
gpio1ldo_vol = 3100
find power_sply to end
no battery, limit to dc
fel key old mode
run key detect
no key found
dram_para_set start
dram_para_set end
[ 0.421]DRAM:1 GiB
relocation Offset is: 35b18000
don't initialize the user_gpio
deu_mode1 not exist.
lcdgamma4iep for lcd1 not exist.
bsp_disp_set_tv_func
gm7121_module_init finish!
DRV_DISP_Init: opened
[ 0.646]boot_disp.output_type=2
[ 0.649]boot_disp.output_mode=5
[ 0.653]boot_disp.auto_hpd=1
gm7121_tv_power_on
gm7121_init, tv_Mode=11
workmode = 0
MMC: 2
SUNXI SD/MMC: 2
Man 880803 Snr 00000670
NCard
1.0
boot0 capacity: 0KB,boot1 capacity: 0KB
[ 1.193]sunxi flash init ok
probe mmc0 if exist
SUNXI SD/MMC: 2, SUNXI SD/MMC: 0
: cmd 8 timeout, err 100
: mmc cmd 8 err 0x00000100
mmc send if cond failed
: cmd 55 timeout, err 100
: mmc cmd 55 err 0x00000100
send app cmd failed
: cmd 1 timeout, err 100
: mmc cmd 1 err 0x00000100
mmc send op cond failed
Card did not respond to voltage select!
MMC0 init failed
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:11-
-name- -start- -size-
bootloader: 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 20000000
data : 24000000 60000000
misc : 84000000 1000000
recovery : 85000000 2000000
cache : 87000000 1c000000
private : a3000000 1000000
databk : a4000000 1000000
UDISK : a5000000 0
-----------------------------------
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
Recovery detected, will usb recovery
to be run cmd=run setargs_mmc boot_recovery
user data is updataed
user data is updataed
WORK_MODE_BOOT
sunxi_bmp_display
blkcnt should not be 0
[ 1.601]Hit any key to stop autoboot:0
read boot or recovery all
[ 5.791]sunxi flash read :offset 85000000, 13585117 bytes OK
no signature
[ 5.801]ready to boot
[ 5.803]
Starting kernel ...
<[ 1.140565] Initramfs unpacking failed: uncompression error
[ 1.178081] sun6i_vibrator_init motor is not used in config
[ 1.363875] ctp_fetch_sysconfig_para: ctp_unused.
[ 1.446563] otg_wakelock_init: No OTG transceiver found
[ 1.457885] init: cannot find '/sbin/ueventd', disabling 'ueventd'
[ 6.022399] init: Timed out waiting for /dev/.coldboot_done
[ 6.029103] init: open display device failed!
[ 6.034329] init: ##av is unsupported
[ 6.038693] init: open display device failed!
[ 6.043686] init: open display device failed!
[ 6.048579] init: open display device failed!
[ 6.049542] init: cannot find '/sbin/busybox', disabling 'initpartition'
[ 6.061009] init: open display device failed!
[ 6.065914] init: open display device failed!
[ 6.070808] init: HDMI status = -1, try 1 times!TV status = 0
[ 6.170408] init: Unable to open persistent property directory /data/property errno: 2
[ 6.179506] init: untracked pid 857 exited
[ 6.185200] init: cannot find '/sbin/recovery', disabling 'recovery'
[ 6.192465] init: cannot find '/sbin/adbd', disabling 'adbd'
然後卡住不動了
@hao501802766求大神解答一下 找找救砖包 直接刷机救砖吧~ hao501802766 发表于 2018-3-9 12:55
找找救砖包 直接刷机救砖吧~
TF卡救砖包沒用,所以最後買了TTL綫,也不知道怎麽搞
页:
[1]