广东电信华为悦盒子EC6108V9U_pub TTL跑马后输入不了命令！
广东电信华为悦盒子EC6108V9U_pub TTL跑马后输入不了命令！请问大神们怎么解决？谢谢！！附提示如下：Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked
SDK Version: HiSTBAndroidV600R001C00SPC065_v2016113014
HI_Flash_Read Ret= 2048
HI_Flash_Read Ret= 2048
HMT_read_bootlogo_count, bootlogo_count=0
HMT_write_bootlogo_count, bootlogo_count=1
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800
start detecting key1...
get key1 value0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 8912896
HI_Flash_Read Ret= 8912896
XIP Kernel Image ... OK
OK
kernel loaded at 0x02000000, end = 0x02782a10
initrd rd_start = 4e00000,rd_end = 4e502ae
HMT_write_bootlogo_count, bootlogo_count=0
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
libphy: PHY himii:1f not found
init: /init.bigfish.rc: 115: invalid option 'sdcard_r'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: read misc boot info 1088/1088 bytes.
init: mount system image fail 0 times.
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p16
init: init: result is 256
init: /dev/hw_random not found
init:
stb-1 8V9 typeinit: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/basicService', disabling 'basicService'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
楼主，这里的教程都看过了吧；https://www.znds.com/jc/plus/search.php?keyword=EC6108 看了，没用……
页:
[1]