中兴b860av1.1怎么
求救AC_ON MIU0_DQS-OK BIST0-▒▒▒ MIU0-1024_U Start ubootRelocation Offset is: 015d7000 U-Boot 2011.06-00114-ga7f97e5-dirty (Oct 23 2017 - 23:15:16) miu opencreate instance at 51be9418 with private size 80 bytes at 51be9460 create instance at 51be94b8 with private size 52 bytes at 51be9500uboot held at ,size=013220a0 CPU: Clippers Board: BD_MST207C_D01A_S_CLIPPERS DRAM:813 MiB Now running in RAM - U-Boot at: 51e00000eMMC: HS200 200MHz eMMC 7.28 GB In: serial Out: serial Err: serial Net: zte_shutdow =false No ethernet found.Set MAC default MAC:0x0: 0x30: 0x1b: 0xba:0x2: 0xdb msIR_Initialize cpu opencreate instance at 51bf99c0 with private size 44 bytes at 51bf9a08 CPUIoctl - MDrv_CMD_CPU_QueryClock close moduleNames: MODULE_CPU ### main_loop entered: s is true### main_loop entered: bootdelay=1 Starting logo ============= set bootargs =============== COMControlFlag=> value=0, val=0 zte_mac=04:95:73:D6:45:A8,ethaddr=04:95:73:D6:45:A8 Hit any key to stop autoboot: 1@ step1 error... abort=0 0 do_bootcheck called MMC_CAPACITY_512 =15269880 current emmc size is =0xe8fff8 (should by 512) MMCusrdata_size =11773944current userdata size =0xb3a7f8 (should by 512) this is 8G emmc get_boot1_ver cmd_boot1=mmc read.boot 1 0x25000000 0x0 0x200000 set hdmi hdcp mode 0! Saving Environment to MMC... Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done iTVStandard2Resolution = 2 value = 11100499007034400000049573D645A8 COMControlFlag=> value=0, val=0 ethaddr =04:95:73:D6:45:A8jy .... search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 search .... waldo msIR_GetIRKeyCode line:482 breturn false fore uup IRKey BootMode=0 BootMode=0 PATCH FOR zte BEGIN Watchdog_enable TRUE Watchdog start, MAXTIME 120 create instance at 51bf9bb0 with private size 256 bytes at 51bf9bf8 MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000 MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000 PNL: pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720 u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500 pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720 u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500 PNL:CalculateLPLLSETbyDClk u32KHz = 742500000, u64DefaultLdHz = 742500000 PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df No instance existed, please get an instance by calling MApi_XC_Init() first msHdmitx_Disp_Init create instance at 51bf9d00 with private size 1720 bytes at 51bf9d48 no need to patchcreate instance at 51bfa948 with private size 80 bytes at 51bfa990 Rx Support HDMI mode! setHDMITxAnalogTuning: Error: MApi_HDMITx_GetRxDCInfoFromEDID EDID is not ready, at 262 shift -8 pixels in PAL mode Create Dolby single part name task failed!! ERROR!!! HVSD H input = 0, HVSD H output = 720 ERROR!!! HVSD V input = 0, HVSD V output = 576 bEnable = 0, bIsDNR2VE = 0 lyndon Hal_VE_Set_PreVSD 1mmc change mount : tvcustomer Size of file "/720.jpg" from mmc device 0 partition tvcustomer: 151757 bytes Loading file "/720.jpg" at offset 0x0 from mmc device 0 partition tvcustomer 151757 bytes read create instance at 51bfa9e8 with private size 304 bytes at 51bfaa30 close moduleNames: MODULE_NJPEG_EXcreate instance at 51bfa9e8 with private size 132280 bytes at 51bfaa30 gop opencreate instance at 51c1aef0 with private size 6908 bytes at 51c1af38 ## Booting kernel from Legacy Image at 25000800 ... Image Name: MStar-linux Image Type: ARM Linux Multi-File Image (uncompressed) Data Size: 5317432 Bytes = 5.1 MiB Load Address: 20208000 Entry Point:20208000 Contents: Image 0: 4627208 Bytes = 4.4 MiB Image 1: 690212 Bytes = 674 KiB ## Loading init Ramdisk from multi component Legacy Image at 25000800 ... -usb_stop(USB_PORT0) -usb_stop(USB_PORT1) -usb_stop(USB_PORT2) Loading Multi-File Image ... OK Starting kernel ..., not expected dram size: 0x0 ####################################################################### # , miu kernel protect is not enabled on second dram # ####################################################################### Uncompressing Linux... done, booting the kernel. KERN-3.10.23.001049551 tommy: thread_info_cache_init mtdoops: mtd device (mtddev=name/number) must be supplied ready init mutex after init mutexRBQP_BASE = 50304000 init: /init.clippers.rc: 455: ignored duplicate definition of service 'mdnsd' init: /zte_init.rc: 38: ignored duplicate definition of service 'xiriservice' init: ## ProductID: strlen (32)! healthd: No charger supplies found init: cannot find '/system/bin/xiriservice_ChinaMobile_SiChuan', disabling 'bluetoothd' init: cannot find '/system/bin/bleservice', disabling 'bleservice' AC_ON
MIU0_DQS-OK
BIST0-▒▒▒
MIU0-1024_U
Start uboot
Relocation Offset is: 015d7000
U-Boot 2011.06-00114-ga7f97e5-dirty (Oct 23 2017 - 23:15:16)
miu opencreate instance at 51be9418 with private size 80 bytes at 51be9460
create instance at 51be94b8 with private size 52 bytes at 51be9500
uboot held at ,size=013220a0
CPU: Clippers
Board: BD_MST207C_D01A_S_CLIPPERS
DRAM:813 MiB
Now running in RAM - U-Boot at: 51e00000
eMMC: HS200 200MHz
eMMC 7.28 GB
In: serial
Out: serial
Err: serial
Net: zte_shutdow =false
No ethernet found.
Set MAC default
MAC:0x0: 0x30: 0x1b: 0xba:0x2: 0xdb
msIR_Initialize
cpu opencreate instance at 51bf99c0 with private size 44 bytes at 51bf9a08
CPUIoctl - MDrv_CMD_CPU_QueryClock
close moduleNames: MODULE_CPU
### main_loop entered: s is true
### main_loop entered: bootdelay=1
Starting logo
============= set bootargs ===============
COMControlFlag=> value=0, val=0
zte_mac=04:95:73:D6:45:A8,ethaddr=04:95:73:D6:45:A8
Hit any key to stop autoboot: 1@
step1 error...
abort=0 0
do_bootcheck called
MMC_CAPACITY_512 =15269880
current emmc size is =0xe8fff8 (should by 512)
MMCusrdata_size =11773944
current userdata size =0xb3a7f8 (should by 512)
this is 8G emmc
get_boot1_ver cmd_boot1=mmc read.boot 1 0x25000000 0x0 0x200000
set hdmi hdcp mode 0!
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
iTVStandard2Resolution = 2
value = 11100499007034400000049573D645A8
COMControlFlag=> value=0, val=0
ethaddr =04:95:73:D6:45:A8
jy ....
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
search ....
waldo msIR_GetIRKeyCode line:482 breturn false
fore uup IRKey
BootMode=0
BootMode=0
PATCH FOR zte BEGIN
Watchdog_enable TRUE
Watchdog start, MAXTIME 120
create instance at 51bf9bb0 with private size 256 bytes at 51bf9bf8
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
PNL:
pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
PNL:CalculateLPLLSETbyDClk u32KHz = 742500000, u64DefaultLdHz = 742500000
PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df
No instance existed, please get an instance by calling MApi_XC_Init() first
msHdmitx_Disp_Init
create instance at 51bf9d00 with private size 1720 bytes at 51bf9d48
no need to patchcreate instance at 51bfa948 with private size 80 bytes at 51bfa990
Rx Support HDMI mode!
setHDMITxAnalogTuning: Error: MApi_HDMITx_GetRxDCInfoFromEDID EDID is not ready, at 262
shift -8 pixels in PAL mode
Create Dolby single part name task failed!! ERROR!!! HVSD H input = 0, HVSD H output = 720
ERROR!!! HVSD V input = 0, HVSD V output = 576
bEnable = 0, bIsDNR2VE = 0
lyndon Hal_VE_Set_PreVSD 1mmc change mount : tvcustomer
Size of file "/720.jpg" from mmc device 0 partition tvcustomer: 151757 bytes
Loading file "/720.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
151757 bytes read
create instance at 51bfa9e8 with private size 304 bytes at 51bfaa30
close moduleNames: MODULE_NJPEG_EX
create instance at 51bfa9e8 with private size 132280 bytes at 51bfaa30
gop opencreate instance at 51c1aef0 with private size 6908 bytes at 51c1af38
## Booting kernel from Legacy Image at 25000800 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 5317432 Bytes = 5.1 MiB
Load Address: 20208000
Entry Point:20208000
Contents:
Image 0: 4627208 Bytes = 4.4 MiB
Image 1: 690212 Bytes = 674 KiB
## Loading init Ramdisk from multi component Legacy Image at 25000800 ...
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
Starting kernel ...
, not expected dram size: 0x0
#######################################################################
# , miu kernel protect is not enabled on second dram #
#######################################################################
Uncompressing Linux... done, booting the kernel.
KERN-3.10.23.001049551
tommy: thread_info_cache_init
mtdoops: mtd device (mtddev=name/number) must be supplied
ready init mutex
after init mutex
RBQP_BASE = 50304000
init: /init.clippers.rc: 455: ignored duplicate definition of service 'mdnsd'
init: /zte_init.rc: 38: ignored duplicate definition of service 'xiriservice'
init: ## ProductID: strlen (32)!
healthd: No charger supplies found
init: cannot find '/system/bin/xiriservice_ChinaMobile_SiChuan', disabling 'bluetoothd'
init: cannot find '/system/bin/bleservice', disabling 'bleservice'
CXVCXVCXVCXV 又见一个好帖，果断先马克mark收藏了! 遇到同样的问题，哪位师傅给点解决方法呢。。
页:
[1]
