你这个帖子让我成功了,谢谢!
谢谢分享
andrewz86 发表于 2018-1-3 22:45
有问题可以联系我:VX18111800008交流,此办法应该大多数盒子通用
联系不上呀{:116:}
收藏 了
问题是我输了update,设备重启,usb_burning_tool还是没有找到设备。不过我是通过adb连接,进入shell模式
方法就是插入U盘,在UBOOT模式下输入。。。如何进入uboot模式?谢谢
感谢分享
Decrypt auxiliary code ...OK
############################################################ ---- 9%
########################################################################################################### ---- 19%
########################################################################################################### ---- 29%
########################################################################################################### ---- 39%
########################################################################################################### ---- 49%
########################################################################################################### ---- 59%
########################################################################################################### ---- 69%
#########################################Failed to send the boot data.
#1. The system fails to run properly due to an error in boot code compilation.
2. If the secure boot function is disabled and boot rootkey is set for the OEM, the boot image is encrypted, but the boot rootkey used for encrypting the boot is different from the boot rootkey burnt to the OTP.
Timeout error.
3. The chip OTP is set to forcibly decrypt the boot image. However, the boot is not correctly encrypted.
4. The board DDR is faulty.
5. The boot code does not support the type of the flash memory to be burnt. If the boot print function is enabled, you can view the printing information through the serial port, showing that the current flash memory type is not supported.
#Failed to send the data frame.